Abstract
Cerium titanium oxide nanocontainers were synthesized through a two-step process and then loaded with corrosion inhibitors 2-mercaptobenzothiazole (2-MB) and 8-hydroxyquinoline (8-HQ). First, polystyrene nanospheres (PS) were produced using polymerization in suspension. Second, the PS spheres were coated via the sol–gel method to form a cerium titanium oxide layer. Finally, the nanocontainers were made by calcination of the coated PS nanospheres. The size of the containers was 180 ± 10 nm as determined by Scanning Electron Microscopy (SEM). X-Ray Diffraction Analysis (XRD) showed that the nanocontainers consist of anatase and cerianite crystalline phases. The presence and loading of the inhibitors in the nanocontainers was confirmed with Fourier Transform Infrared Spectroscopy (FT–IR) and Thermo Gravimetric Analysis (TGA), respectively. TGA revealed the amount of 10.43 and 4.61% w/w for 2-MB and 8-HQ in the nanocontainers, respectively. Furthermore, the release kinetics of the inhibitors from the nanocontainers was studied in corrosive environment using electrochemical impedance spectroscopy (EIS) in the presence of aluminum alloys 2024-T3 (AA2024-T3).
Similar content being viewed by others
References
Ding Y, Hu Y, Zhang L, Chen Y, Jiang X (2006) Synthesis and magnetic properties of biocompatible hybrid hollow spheres. Biomacromolecules 7:1766–1772
Hu Y, Chen Y, Chen Q, Zhang L, Jiang X, Yang C (2005) Synthesis and stimuli-responsive properties of chitosan/poly(acrylic acid) hollow nanospheres. Polymer 46:12703–12710
Jablonski AE, Lang AJ, Vyazovkin S (2008) Isoconversional kinetics of degradation of polyvinylpyrrolidone used as a matrix for ammonium nitrate stabilization. Thermochim Acta 78–80
Kartsonakis IA, Kordas G (2009) Synthesis and characterization of cerium molybdate nanocontainers and their inhibitor complexes. J Am Ceram Soc 93:65–73
Kartsonakis IA, Liatsi P, Daniilidis I, Kordas G (2007) Synthesis, characterization, and antibacterial action of hollow ceria nanospheres with/without a conductive polymer coating. J Am Ceram Soc 91:372–378
Kartsonakis IA, Liatsi P, Danilidis I, Bouzarelou D, Kordas G (2008) Synthesis, characterization and antibacterial action of hollow titania spheres. J Phys Chem Solids 69:214–221
Keomany D (1995) Electrochemical insertion in sol–gel made CeO2–TiO2 from lithium conducting polymer electrolyte: relation with the material structure. Sol Energy Mater Sol C 36:397–408
Khramov AN, Voevodin NN, Balbyshev VN, Donley MS (2004) Hybrid organo-ceramic corrosion protection coatings with encapsulated organic corrosion inhibitors. Thin Solid Films 447:549–557
Lamaka SV, Zheludkevich ML, Yasakau KA, Montemor MF, Ferreira MGS (2007) High effective organic corrosion inhibitors for 2024 aluminium alloy. Electrochim Acta 52:7231–7247
Mc Devitt NT, Baun WL (1964) Infrared absorption study of metal oxides in the low frequency region (700–240 cm−1). Spectrochim Acta 20:799–808
Otsuka-Yao-Matsuo S, Omata T, Yoshimura M (2004) Photocatalytic behavior of cerium titanates, CeTiO4 and CeTi2O6 and their composite powders with SrtiO3. J Alloy Compd 376:262–267
Pappas GS, Liatsi P, Kartsonakis IA, Danilidis I, Kordas G (2008) Synthesis and characterization of new SiO2–CaO hollow nanospheres by sol–gel method: bioactivity of the new system. J Non Cryst Solids 354:755–760
Poznyak SK, Zheludkevich ML, Raps D, Gammel F, Yasakau KA, Ferreira MGS (2008) Preparation and corrosion protective properties of nanostructures titania-containing hybrid sol–gel coatings on AA2024. Prog Org Coat 62:226–235
Raps D, Hack T, Wehr J, Zheludkevich ML, Bastos AC, Ferreira MGS, Nuyken O (2009) Electrochemical study of inhibitor-containing organic–inorganic hybrid coatings. Corros Sci 51:1012–1021
Sanyal B (1981) Organic compounds as corrosion inhibitors in different environments–a review. Prog Org Coat 9:165
Shchukin DG, Lamaka SV, Yasakau KA, Zheludkevich ML, Ferreira MGS, Möhwald H (2008) Active anticorrosion coatings with halloysite nanocontainers. J Phys Chem C 112:958–964
Takeuchi M, Marta G, Coluccia S, Anpo M (2005) Investigations of the structure of H2O clusters adsorbed on TiO2 surfaces by near-infrared absorption spectroscopy. J Phys Chem B 109:7387–7391
Verma A, Samanta SB, Bakshi AK, Agnihotry SA (2004) Optimization of CeO2–TiO2 composition for fast switching kinetics and improved Li ion storage capacity. Solid State Ionics 171:81–90
Verma A, Srivastava AK, Sood KN (2007) Effect of precursor sol’s aging on properties of nanostructured thin films with coexistent CeO2 and CeTi2O6 phases. Solid State Ionics 178:1288–1296
Yasakau KA, Zheludkevich ML, Karavai OV, Ferreira MGS (2008) Influence of inhibitor addition an the corrosion protection performance of sol–gel coatings on AA2024. Prog Org Coat 63:352–361
Zheludkevich ML, Serra R, Montemor MF, Ferreira MGS (2005a) Oxide nanoparticle reservoirs for storage and prolonged release of corrosion inhibitors. Electrochem Commun 7:836–840
Zheludkevich ML, Serra R, Montemor MF, Yasakau KA, Salvador IM, Ferreira MGS (2005b) Nanosractured so–gel coatings with cerium nitrate as pre-treatments for AA2024-T3 corrosion protection performance. Electrochim Acta 51:208–217
Zheludkevich ML, Yasakau KA, Poznyak SK, Ferreira MGS (2005c) Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy. Corros Sci 47:3368–3383
Zheludkevich ML, Shchukin DG, Yasakau KA, Möhwald H, Ferreira MGS (2007a) Anticorrosion coatings with self-healing effect based on nanocontainers impregnated with corrosion inhibitor. Chem Mater 19:402–411
Zheludkevich ML, Shchukin DG, Yasakau KA, Möhwald H, Ferreira M,GS (2007b) Anticorrosion coatings with self-healing effect based nanocontainers impregnated with corrosion inhibitor. Chem Mater 19:402–411
Zheludkevich ML, Yasakau KA, Bastos AC, Karavai OV, Ferreira MGS (2007c) On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings. Electrochem Commun 9:2622–2628
Zheng M, Cao J, Chang X, Wang J, Liu J, Ma X (2006) Preparation of oxide hollow spheres by colloidal carbon spheres. Mater Lett 60:2991–2993
Acknowledgments
This project was supported by FP7 Collaborative Project “MUST”. The abbreviation “MUST” stands for “Multi-Level Protection of Materials for Vehicles by “SMART” Nanocontainers” (EC Grant Agreement Number NMP3-LA-2008-214261).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mekeridis, E.D., Kartsonakis, I.A., Pappas, G.S. et al. Release studies of corrosion inhibitors from cerium titanium oxide nanocontainers. J Nanopart Res 13, 541–554 (2011). https://doi.org/10.1007/s11051-010-0044-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11051-010-0044-x