Abstract
In order to examine relaxation behaviors of materials, static recovery term is always conducted in the backstress components for kinematic hardening in time-dependent plasticity model. Implicit integration algorithm for non-unified visco-plasticity model is derived. Plastic strain is divided into two parts: the visco-plastic strain, which is calculated based on the viscosity function, and the steady strain which only depends on the equivalent deviatoric backstress. Using the Newton iterative strategy, two sets of equations for deviatoric stress and relative stress tensors are solved. Additionally, the return mapping method is applied in numerical method, and consistent tangent stiffness modulus is progressed for convergence in finite element analysis. The model is implemented into commercial software ABAQUS as user subroutine UMAT. Dwell experiments of nickel-based superalloy under strain-controlled cyclic loading with holding periods for relaxation at high temperature are selected to verify the method. The results indicate that the user subroutine attains convergence with good speed even at large increment, and the additional static recovery terms can improve the simulation for relaxation behaviors.
Similar content being viewed by others
References
Abdel-Karim, M., Ohno, N.: Kinematic hardening model suitable for ratchetting with steady-state. Int. J. Plast. 16, 225–240 (2000)
Ahmadzadeh, G.R., Varvani-Farahani, A.: Ratchetting assessment of materials based on the modified Armstrong–Frederick hardening rule at various uniaxial stress levels. Fatigue Fract. Eng. Mater. Struct. 36, 1232–1245 (2013)
Chaboche, J.L.: Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plast. 5, 247–302 (1989)
Chaboche, J.L.: On some modifications of kinematic hardening to improve the description of ratchetting effects. Int. J. Plast. 7, 661–678 (1991)
Chaboche, J.L.: A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plast. 24, 1642–1693 (2008)
Chaboche, J.L., Van, K.D., Cordier, G.: Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. In: Proceedings of the 5th International Conference SMiRT 5, Div. L, Berlin, Germany (1979)
Chen, W., Wang, F., Feng, M.: Study of a modified non-unified model for time-dependent behavior of metal materials. Mech. Mater. 113, 69–76 (2017)
Chen, W., Kitamura, T., Feng, M.: Creep and fatigue behavior of 316L stainless steel at room temperature: experiments and a revisit of a unified viscoplasticity model. Int. J. Fatigue 112, 70–77 (2018)
Dassault Systèmes Simulia Corp.: ABAQUS/Standards User’s Manual, Version 6.10
Doghri, I.: Fully implicit integration and consistent tangent modulus in elasto-plasticity. Int. J. Numer. Methods Eng. 36, 3915–3932 (2010)
Frederick, C.O., Armstrong, P.J.: A mathematical representation of the multiaxial bauschinger effect. Mater. High Temp. 24, 1–26 (2007)
Hartmann, S., Haupt, P.: Stress computation and consistent tangent operator using non-linear kinematic hardening models. Int. J. Numer. Methods Eng. 36, 3801–3814 (1993)
Hartmann, S., Luhrs, G., Haupt, P.: An efficient stress algorithm with applications in viscoplasticity and plasticity. Int. J. Numer. Methods Eng. 40, 991–1013 (1997)
Jiang, Y., Sehitoglu, H.: Modeling of cyclic ratchetting plasticity, part I: development of constitutive relations. J. Appl. Mech. 63, 720–725 (1996a)
Jiang, Y., Sehitoglu, H.: Modeling of cyclic ratchetting plasticity, part II: comparison of model simulations with experiments. J. Appl. Mech. 63, 726–733 (1996b)
Kang, G.: A visco-plastic constitutive model for ratchetting of cyclically stable materials and its finite element implementation. Mech. Mater. 36, 299–312 (2004)
Kang, G.: Finite element implementation of visco-plastic constitutive model with strain-range-dependent cyclic hardening. Commun. Numer. Methods Eng. 22, 137–153 (2005)
Kang, G.: Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application. Int. J. Fatigue 30, 1448–1472 (2008)
Kang, G., Ohno, N., Nebu, A.: Constitutive modeling of strain range dependent cyclic hardening. Int. J. Plast. 19, 1801–1819 (2003)
Kobayashi, M., Mukai, M., Takahashi, H., Ohno, N., Kawakami, T., Ishikawa, T.: Implicit integration and consistent tangent modulus of a time-dependent non-unified constitutive model. Int. J. Numer. Methods Eng. 58, 1523–1543 (2003)
Kobayashi, M., Ohno, N.: Implementation of cyclic plasticity models based on a general form of kinematic hardening. Int. J. Numer. Methods Eng. 53, 2217–2238 (2002)
de Souza Neto, E.A.D.S., Perić, D., Owen, D.R.J.: Computational Methods for Plasticity: Theory and Applications. Wiley, New York (2008)
Nouailhas, D.: Unified modelling of cyclic viscoplasticity: application to austenitic stainless steels. Int. J. Plast. 5, 501–520 (1989)
Ohno, N., Tsuda, M., Kamei, T.: Elastoplastic implicit integration algorithm applicable to both plane stress and three-dimensional stress states. Finite Elem. Anal. Des. 66, 1–11 (2013)
Ohno, N., Tsuda, M., Sugiyama, H., Okumura, D.: Elastic-viscoplastic implicit integration algorithm applicable to both plane stress and three-dimensional stress states. Finite Elem. Anal. Des. 109, 54–64 (2016)
Ohno, N., Wang, J.D.: Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior. Int. J. Plast. 9, 375–390 (1993a)
Ohno, N., Wang, J.D.: Kinematic hardening rules with critical state of dynamic recovery, part II: application to experiments of ratchetting behavior. Int. J. Plast. 9, 391–403 (1993b)
Simo, J.C., Taylor, R.L.: Consistent tangent operators for rate-independent elastoplasticity. Comput. Methods Appl. Mech. Eng. 48, 101–118 (1985)
Simo, J.C., Hughes, T.J.R.: Computational Inelasticity. Springer, Berlin (1998)
Varvani-Farahani, A.: A comparative study in descriptions of coupled kinematic hardening rules and ratchetting assessment over asymmetric stress cycles. Fatigue Fract. Eng. Mater. Struct. 40, 882–893 (2017)
Zhan, Z.L., Tong, J.: A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations, part I: evaluation and determination of material parameters. Mech. Mater. 39, 64–72 (2007a)
Zhan, Z.L., Tong, J.: A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations, part II: simulation of cyclic stress relaxation. Mech. Mater. 39, 73–80 (2007b)
Acknowledgement
We acknowledge the support by the National Natural Sciences Foundation of China (11572191) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (20130073110057).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, M., Feng, M. Finite element implementation of non-unified visco-plasticity model considering static recovery. Mech Time-Depend Mater 24, 59–72 (2020). https://doi.org/10.1007/s11043-018-09406-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11043-018-09406-9