The aim of this study was to determine the feasibility of riveted joints of composites. Using tensile tests, a series of strength investigations were conducted. The strength of composite specimens was examined with and without the presence of a feed force. The specimens were made using two types of fabric with four fiber orientations. The digital image correlation method was used to prepare their strain maps. Depending on the arrangement of fiber orientations, various composite damage models are described. Based on the failure mode of the test specimens, the least and most desirable fiber orientations are determined.
Similar content being viewed by others
REFERENCES
W. Huang, T. Wang, Y. Garbatov, and C. Guedes Soares, “Fatigue reliability assessment of riveted lap joint of aircraft structures,” Int. J. Fatigue, 10, 43(0), 54-61 (2012).
F. A. Fazzolari, “A refined dynamic stiffness element for free vibration analysis of cross-ply laminated composite cylindrical and spherical shallow shells,” Composites: Part B, Engineering, 6, 62(0), 143-158 (2014).
R. F. Gibson, Principles of composite material mechanics. 3rd ed. Boca Raton: CRC Press, Taylor & Francis Group, (2012).
C. Atas, “Bearing strength of pinned joints in woven fabric composites with small weaving angles,” Composite Structures, 3, 88(1), 40-45 (2009).
Z. Cao and M. Cardew-Hall, “Interference-fit riveting technique in fiber composite laminates,” Aerospace Sci. and Technol., 5, 10(4), 327-330 (2006).
A. Skorupa, M. Skorupa, T. Machniewicz, and A. Korbel, “Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage,” Int. J. Fatigue, 1, 58(0), 209-217 (2014).
A. Ataş and C. Soutis, “Subcritical damage mechanisms of bolted joints in CFRP composite laminates,” Composites: Part B: Engineering, 11, 54(0), 20-27 (2013).
M. Klasztorny, A. Bondyra, P. Szurgott, and D. Nycz, “Numerical modelling of GFRP laminates with MSC marc system and experimental validation,” Computational Materials Sci., 11, 64(0), 151-156 (2012).
J. H. Deng, C. Tang, M. W. Fu, and Y. R. Zhan, “Effect of discharge voltage on the deformation of ti grade 1 rivet in electromagnetic riveting,” Mater. Sci. and Engineering A, 591, 26-32 (2014).
M. Rodzewicz, “An investigation into the strength and fatigue properties of high-loaded aeronautical composite structures,” Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology. (2008).
M. Kashfuddoja and M. Ramji, “Whole-field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D-DIC and FEA,” Composites: Part B, Engineering, 10, 53(0), 46-61 (2013).
H. Wang, H. Xie, L. Wu, and S. He, “Study on the effect of DIC deformation sensor on mechanical property of substrate,” Measurement, 3, 49(0), 283-288 (2014).
J. Orteu, M. Sutton, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications, New York: Springer (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 52, No. 2, pp. 291-304, March-April, 2016.
Rights and permissions
About this article
Cite this article
Bielawski, R., Kowalik, M., Suprynowicz, K. et al. Investigation of Riveted Joints of Fiberglass Composite Materials. Mech Compos Mater 52, 199–210 (2016). https://doi.org/10.1007/s11029-016-9573-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-016-9573-4