Inspection of the heat treatment section is performed on the basis of studying results of supercooled austenite transformation in silicon steel and modeling for heat treatment in a Heat Treatment Solution (SYSWELD) program. Deviations are revealed for the hardening production process, after whose avoidance uniform distribution of structural components and hardness is achieved through the cross section of components, and this provides an improvement for finished object set of properties.
Similar content being viewed by others
References
V. A. Khotinov, S. V. Oshchukov, and V. M. Farber, “Structure and mechanical properties of medium-carbon steels after heating in the intercritical temperature range,” Metal Sci. Heat Treat., 53, 545–549 (2012), DOI: 10.1007/ s11041-012-9430-6.
A. A. Redikul’tsev, G. S. Korzunin, M. L. Lobanov, et al., “Effect of annealing on magnetostrictive characteristics of a grain oriented electrical steel with ordinary and refi ned domain structure,” Phys. Metals Metallogr., 115, 650–654 (2014), DOI: 0.1134/S0031918X14070072.
D. O. Panov, Yu. N. Simonov, P. A. Leont’ev, et al., “A study of phase and structural transformations of hardened low-carbon steel under conditions of multiple intense heat effect,” Metal Sci. Heat Treat., 54, 582–586 (2013), DOI: 10.1007/s11041-013-9553-4.
M. V. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, and A. A. Ershov, “Heat treatment technology for high-strength engineering steel variable cross-section components,” Metallurgist, 58, 712–716 (2014), DOI: 10.1007/ s11015-014-9982-3.
A. I. Stepanov, I. N. Ashikhmina, I. N. Veselov, et al., “Assimilation of the production of casing pipe resistant to the action of industrial atmospheres containing hydrogen sulfi de,” Metallurgist, 58, 603–607 (2014), DOI: 10.1007/ s11015-014-9964-5.
M. A. Smirnov, I. Yu. Pyshmintsev, A. N. Maltseva, and O. V. Mushina, “Effect of ferrite-bainite structure on the properties of high-strength pipe steel,” Metallurgist, 56, 43–51 (2012), DOI: 10.1007/s11015-012-9534-7.
M. A. Ryzhkov and A. A. Popov, “Methodological aspects of plotting of thermokinetic diagrams of transformation of su percooled austenite in low-alloy steels,” Metal Sci. Heat Treat., 52, 612–616 (2011), DOI: 10.1007/s11041-011-9329-7.
M. V. Maisuradze, Yu. V. Yudin, and M. A. Ryzhkov, “Numerical simulation of pearlitic transformation in steel 45Kh5MF,” Metal Sci. Heat Treat., 56, 512–516 (2015), DOI: 10.1007/s11041-015-9791-8.
Yu. V. Yudin, M. V. Maisuradze, and N. P. Anufriev, “Design of water-drip cooling facilities for heat treatment of mill rollers,” Metal Sci. Heat Treat., 55, 129–133 (2013), DOI: 10.1007/s11041-013-9592-x.
The work was completed partly in the framework of project theme of the Ministry of Education and Science of Russian Federation (state assignment № 11.1465.2014/K). The authors acknowledge cooperation of the support of Russian Federation universities with the aim of increasing their competitiveness, No. 211 RF Government № 02.А03.21.0006. Results are used in the work obtained in the Laboratory of Structural Methods of Analysis and Properties of Materials and Nanomaterials at TsKP UrFU.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 5, pp. 54–57, May, 2015.
Rights and permissions
About this article
Cite this article
Ryzhkov, M.A., Maisuradze, M.V., Yudin, Y.V. et al. Experience in Improving Silicon Steel Component Heat Treatment Quality. Metallurgist 59, 401–405 (2015). https://doi.org/10.1007/s11015-015-0117-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-015-0117-2