We study the corrosion rate of titanium obtained by the method of powder metallurgy in aqueous solutions of inorganic acids. It is shown that the addition of titanium hydride to the original powder mixture increases the density of the material, decreases the actual contact area with aggressive media, and hence, enhances its corrosion resistance. However, we did not establish any clear relationship between the content of titanium hydride in the original powder mixture and the corrosion rate of the compacted material.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
V. S. Moxson, O. N. Senkov, and F. H. Froes, “Innovations in titanium powder processing,” J. Minerals. Metals & Mater. Soc., 52, No. 5, 23–26 (2000).
F. H. Froes, S. J. Mashl, V. S. Moxson, J. C. Hebeisen, and V. A. Duz, “The technologies of titanium powder metallurgy,” J. Minerals. Metals & Mater. Soc., 56, No. 11, 46–48 (2004).
O. M. Ivasishin, D. G. Savvakin, V. S. Bondareva, V. S. Mokson, and V. A. Duz’, “Production of titanium alloys and products by the economical method of powder metallurgy for large-scale industrial application,” Nauka & Innovats., No. 2, 44–57 (2005).
V. Amogo, L. Reig, and D. J. Busquest, “Analysis of bending strings of porous titanium processed by space holder method,” Powder Metall., 54, 67–70 (2011).
B. A. Kolachev, A. A. Il’in, B. A. Lavrenko, and Yu. V. Levinskii, Hybrid Systems: Handbook [in Russian], Metallurgiya, Moscow (1992).
V. I. Kichigin, M. V. Polyakova, O. P. Koshcheev, and A. I. Rabinovich, “Determination of the corrosion rate of sintered powder nickel in acid chlorine solution,” Zashch. Met., 39, No. 5, 1–6 (2003).
A. A. Skrebtsov, Improvement of the Mechanical and Service Properties of Sintered Titanium Alloys [in Russian], Candidate-Degree Thesis (Eng.), Zaporizhzhya (2015).
S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1976).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 52, No. 5, pp. 88–92, September–October, 2016.
Rights and permissions
About this article
Cite this article
Pohrelyuk, І.М., Ovchynnykov, O.V., Skrebtsov, А.А. et al. Corrosion Properties of Titanium Obtained by the Method of Powder Metallurgy. Mater Sci 52, 700–705 (2017). https://doi.org/10.1007/s11003-017-0012-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-017-0012-z