Abstract
Granulated rubber obtained from used tyres, below 1.5 mm granularity (fine rubber) and polyurethane prepolymers (Chemolan M, Chemolan M50 and Chemolan B3) were used for the synthesis of rubber waste-polyurethane composites, containing 90, 85, 80, 75 and 70% w/w of fine rubber. The influence of the kind of polyurethane resin on hardness, elasticity, glass transition temperature and thermal stability of composites was studied. Kinetic parameters of the thermal degradation process of composites were calculated from thermogravimetric analysis (TG) data.
Similar content being viewed by others
References
S. Bebbington, Europ. Rubb. J., 11 (1991) 10.
A. Stirling, Gummi, Fasern, Kunst., 45 (1992) 14.
B. Makarucha, W. W. Sułkowski, M. Klimczyk, M. Moczyński and J. Ossowski, Polym. Recycl., 6 (2001) 63.
W. Parasiewicz, L. Pysklo and P. Wilkoński, Ekoplast, 13 (1998) 21 (in Polish).
M. Ginic-Markovic, N. Roy Choundhry, J. G. Matisons and N. Dutta, J. Therm. Anal. Cal., 56 (2001) 943.
A. K. Sircar, Rubber Chem. Technol., 65 (1992) 503.
A. K. Sircar and T. G. Lamond, Rubber Chem. Technol., 45 (1972) 329.
N. K. Dutta and D. K. Tripathy, J. Appl. Polym. Sci., 44 (1992) 123.
N. Roy Choudhury and A. K. Bhowmick, Thermochim. Acta, 176 (1991) 149.
D. M. Price, Thermochim. Acta, 294 (1997) 127.
M. Ginic-Markovic, N. Roy Choudhury, M. Dimopoulos, D. R. G. Williams and J. Matisons, Thermochim. Acta, 316 (1998) 87.
C. Dispenza and G. Spadaro, J. Therm. Anal. Cal., 61 (2000) 579.
P. T. Williams and S. Besler, Fuel, 74 (1995) 1277.
P. Raman, W. P. Walawender, L. T. Fan and J. A. Howell, Ind. Eng. Chem. Process Des. Dev., 20 (1981) 630.
W. W. Sułkowski, J. Borek, A. Danch, A. Radoń, A. Sułkowska, J. Ossowski, G. Toborowicz and A. Bernatek, J. Therm. Anal. Cal., 77 (2004) 363.
R. K. Agrawal in ‘Compositional Analysis by Thermogravimetry’ (Ed. C. M. Earnest), American Society for Testing and Materials, Philadelphia 1988.
P. T. Williams and S. Besler, Fuel, 72 (1993) 151.
D. F. Arsencau, Can. J. Chem., 49 (1971) 632.
J. A. Conesa, R. Font and A. Marcilla, J. Analyt. Appl. Pyrol., 43 (1997) 83.
J. A. Conesa, R. Font, A. Fullana and J. A. Caballero, Fuel, 77 (1998) 1469.
J. E. Helt and R. K. Agrawal in Pyrolysis oil from Biomass: ‘Producing, Analysing and Upgrading’ (Eds J. Soltes and T. A. Milne) American Chemical Society, Washington, DC 1988.
M. J. Antal, A. L. Friedman and F. E. Rogers, Combust. Sci. Technol., 21 (1980) 141.
D. W. Brazier, Rubber Chem. Technol., 3 (1980) 437.
D. W. Brazier and N. V. Schwartz, J. Appl. Polym. Sci., 22 (1978) 113.
J. C. W. Chien and J. K. Y. Kiang, Eur. Polym. J., 15 (1979) 1059.
A. K. Bhowmick, S. Rampalli, K. Gallagher, R. Seeger and D. McIntyre, J. Appl. Polym. Sci., 33 (1987) 1125.
D. I. Burlett, J. Therm. Anal. Cal., 75 (2004) 531.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work has been financially supported by the State Committee for Scientific Research, Poland (research project-grant no. 3 T09B 043 19).
Rights and permissions
About this article
Cite this article
Sułkowski, W.W., Danch, A., Moczyński, M. et al. Thermogravimetric study of rubber waste-polyurethane composites. J Therm Anal Calorim 78, 905–921 (2004). https://doi.org/10.1007/s10973-005-0457-0
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s10973-005-0457-0