Skip to main content
Log in

Compatibilization of Poly(ethylene terephthalate)/Polypropylene Blends with Maleic Anhydride Grafted Polyethylene-Octene Elastomer

  • Published:
Journal of Polymer Research Aims and scope Submit manuscript

Abstract

Blends of poly(ethylene terephthalate) (PET) and polypropylene (PP) at composition 80/20 with and without a compatibilizing agent were studied. Both materials are widely used in the soft drink bottle industry. The compatibilizing agent was a maleic anhydride grafted polyethylene-octene elastomer (POE-g-MA). The olefinic segment of POE is compatible with PP, whereas the maleic anhydride is affined with PET carbonyl groups. The effectiveness of the compatibilizing agent was evaluated using different techniques, such as Fourier transform IR spectroscopy, mechanical analysis, scanning electron microscopy, dynamic mechanical analysis, and rheological analysis. The results show that the addition of POE-g-MA promotes a fine dispersed-phase morphology, and improves process ability and toughness of these blends. Shifts in the glass-transition temperature of the PET phase and the increase in the melt viscosity of the compatibilized blends indicated enhanced interactions between the discrete PET and PP phases induced by the functional compatibilizer.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. M. Xanthos, M. W. Young and J. A. Bieseberger, Polym. Eng. Sci., 30, 355 (1990).

    Article  CAS  Google Scholar 

  2. M. Heino, J. Kirjava, P. Hietaoja and J. Seppala, J. Appl. Polym. Sci., 65, 241 (1997).

    Article  CAS  Google Scholar 

  3. C. Guerrero, T. Lozano, V. Gonzalez and E. Arroyo, J. Appl. Polym. Sci., 82, 1382 (2001).

    Article  CAS  Google Scholar 

  4. J. M. Lusinchi, B. Boutevin, N. Torres and J. J. Robin, J. Appl. Polym. Sci., 79, 874 (2001).

    Article  CAS  Google Scholar 

  5. N. Torres, J. J. Robin and B. Boutevin, J. Appl. Polym. Sci., 81, 2377 (2001).

    Article  CAS  Google Scholar 

  6. N. Zdrazilova, B. Hawsnerova, T. Kitano and P. Saha, Polym. Polym. Compos., 11, 487 (2003).

    CAS  Google Scholar 

  7. P. M. McShane, G. M. McNally, T. McNally, and W. R. M. Murphy, SPE ANTEC'2001, 2349 (2001).

  8. D. R. Paul, J. Appl. Polym. Sci., 76, 1480 (2000).

    Article  CAS  Google Scholar 

  9. A. L. N. Da Silva, J. Appl. Polym. Sci., 75, 692 (2000).

    Article  Google Scholar 

  10. A. L. N. Da Silva, Polym. Test., 19, 363 (2000).

    Article  Google Scholar 

  11. T. L. Carte and A. Moet, J. Appl. Polym. Sci., 48, 611 (1993).

    Article  CAS  Google Scholar 

  12. N. K. Kalfoglou, D. S. Skafidas and J. K. Kallitsis, Polymer, 36, 4453 (1995).

    Article  CAS  Google Scholar 

  13. M. F. Champagne, M. A. Huneault and C. Roux, SPE ANTEC'98, 2455 (1998).

  14. L. Yao and C. Beatty, SPE ANTEC'97, 542 (1997).

  15. Y. Pietrasanta, J. J. Robin, B. Boutevin and N. Torres, Macromol. Chem. Phys., 200, 142 (1999).

    Article  CAS  Google Scholar 

  16. M. K. Akkapeddi and B. Buskirk, Polym. Mater. Sci. Eng., 67, 317 (1992).

    CAS  Google Scholar 

  17. Y. J. Sun, G. H. Hu and M. Lambla, Polymer, 37, 4119 (1996).

    Article  CAS  Google Scholar 

  18. M. F. Champagne, M. A. Huneault, C. Roux and W. Peyrel, Polym. Eng. Sci., 39, 976 (1999).

    Article  CAS  Google Scholar 

  19. M. Heino, J. Kirjava, P. Hietaoja and J. Seppälä, Appl. Polym. Sci., 65, 241 (1997).

    Article  CAS  Google Scholar 

  20. T. Y. Bae, K. Y. Park, D. H. Kim and K. D. Suh, J. Appl. Polym. Sci., 81, 1056 (2001).

    Article  CAS  Google Scholar 

  21. A. Gonzalez-Montiel, H. Keskkula and D. R. Paul, Polymer, 36, 4605 (1995).

    Article  CAS  Google Scholar 

  22. Z.-Z. Yu, Y.-C. Ou, Z.-N. Qi, and G.-H. Hu, J. Polym. Sci., 36, 1987 (1998).

    CAS  Google Scholar 

  23. Z.-Z. Yu, Y.-C. Ou, and G.-H. Hu, J. Appl. Polym. Sci., 69, 1711 (1998).

    Article  CAS  Google Scholar 

  24. G. Samay, T. Nagy and J. L. White, Int. Polym. Sci. Technol., 22, T/30 (1995).

    Google Scholar 

  25. T. Nagy, G. Samy and J. L. White, Int. Polym. Sci. Technol., 22, T/40 (1995).

    Google Scholar 

  26. F. M. B. Coutinho and M. I. P Ferreiva, Polym. Test., 13, 25 (1994).

    Article  CAS  Google Scholar 

  27. T. L. Cart'e and A. Mont, J. Appl. Polym. Sci., 48, 611 (1993).

    Article  Google Scholar 

  28. M. Penco, M. A. Pastorino, E. Dcchiello, F. Garbassi, R. Braglia and G. Giannotta, J. Appl. Polym. Sci., 57, 329 (1995).

    Article  CAS  Google Scholar 

  29. L. Marquez, D. E. Gambus, M. P. Romero-Rato and M. A. Sabino, SPE ANTEC '99, 3903 (1999).

  30. F. P. La Mantia, M. Vinci and F. Pilati, Polym. Recycl., 1, 33 (1994).

    CAS  Google Scholar 

  31. R. Armat and A. Moet, Polymer, 34, 977 (1993).

    Article  CAS  Google Scholar 

  32. R. Holsti-Miettinen, M. Heino and J. Seppälä, J. Appl. Polym. Sci., 57, 573 (1995).

    Article  CAS  Google Scholar 

  33. M. Lambla and M. Seadan, Polym. Eng. Sci., 32, 1687 (1992).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yao-Kuei Hsiao.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chiu, HT., Hsiao, YK. Compatibilization of Poly(ethylene terephthalate)/Polypropylene Blends with Maleic Anhydride Grafted Polyethylene-Octene Elastomer. J Polym Res 13, 153–160 (2006). https://doi.org/10.1007/s10965-005-9020-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10965-005-9020-z

Key words

Navigation