Abstract
Quantitative assessment of micro-structure of materials is of key importance in many fields including tissue engineering, biology, and dentistry. Micro-computed tomography (µ-CT) is an intensively used non-destructive technique. However, the acquisition parameters such as pixel size and rotation step may have significant effects on the obtained results. In this study, a set of tissue engineering scaffolds including examples of natural and synthetic polymers, and ceramics were analyzed. We comprehensively compared the quantitative results of µ-CT characterization using 15 acquisition scenarios that differ in the combination of the pixel size and rotation step. The results showed that the acquisition parameters could statistically significantly affect the quantified mean porosity, mean pore size, and mean wall thickness of the scaffolds. The effects are also practically important since the differences can be as high as 24% regarding the mean porosity in average, and 19.5 h and 166 GB regarding the characterization time and data storage per sample with a relatively small volume. This study showed in a quantitative manner the effects of such a wide range of acquisition scenarios on the final data, as well as the characterization time and data storage per sample. Herein, a clear picture of the effects of the pixel size and rotation step on the results is provided which can notably be useful to refine the practice of µ-CT characterization of scaffolds and economize the related resources.
Graphical Abstract
Similar content being viewed by others
References
Flannery BP, Deckman HW, Roberge WG, D’Amico KL. Three-dimensional X-ray microtomography. Science. 1987;237(4821):1439–44.
Landis EN, Keane DT. X-ray microtomography. Mater Charact. 2010;61(12):1305–16.
Mizutani R, Suzuki Y. X-ray microtomography in biology. Micron. 2012;43(2):104–15.
Ritman EL. Micro-computed tomography - current status and developments. Annu Rev Biomed Eng. 2004;6:185–208.
Sasov A, Van Dyck D. Desktop X-ray microscopy and microtomography. Journal Microsc. 1998;191(2):151–8.
Ho ST, Hutmacher DW. A comparison of micro-CT with other techniques used in the characterization of scaffolds. Biomaterials. 2006;27(8):1362–76.
Müller R, Matter S, Neuenschwander P, Suter U, Rüegsegger P editors. 3D micro-tomographic imaging and quantitative morphometry for the nondestructive evaluation of porous biomaterials. MRS Proceedings; 1996: Cambridge Univ Press.
Cnudde V, Boone MN. High-resolution X-ray computed tomography in geosciences: a review of the current technology and applications. Earth-Sci Rev. 2013;123:1–17.
Zhu W, Gaetani GA, Fusseis F, Montési LG, De Carlo F. Microtomography of partially molten rocks: three-dimensional melt distribution in mantle peridotite. Science. 2011;332(6025):88–91.
Hindelang F, Zurbach R, Roggo Y. Micro-computer tomography for medical device and pharmaceutical packaging analysis. J Pharm Biomed Anal. 2015;108:38–48.
Wise LD, Winkelmann CT, Dogdas B, Bagchi A. Micro‐computed tomography imaging and analysis in developmental biology and toxicology. Birth Defects Res Part C: Embryo Today: Rev. 2013;99(2):71–82.
Swain MV, Xue J. State of the art of Micro-CT applications in dental research. Int J Oral Sci. 2009;1(4):177.
Thimm BW, Wechsler O, Bohner M, Müller R, Hofmann S. In vitro ceramic scaffold mineralization: Comparison between histological and micro-computed tomographical analysis. Ann Biomed Eng. 2013;41(12):2666–75.
van Lenthe GH, Hagenmüller H, Bohner M, Hollister SJ, Meinel L, Müller R. Nondestructive micro-computed tomography for biological imaging and quantification of scaffold–bone interaction in vivo. Biomaterials. 2007;28(15):2479–90.
Gao X, Tay FR,oGutmann JL, Fan W, Xu T, Fan B. Micro-CT evaluation of apical delta morphologies in human teeth. Sci Rep. 2016;6:36501. doi:10.1038/srep36501.
Hildebrand T, Laib A, Müller R, Dequeker J, Rüegsegger P. Direct three‐dimensional morphometric analysis of human cancellous bone: microstructural data from spine, femur, iliac crest, and calcaneus. J bone Mineral Res. 1999;14(7):1167–74.
Müller R, Van Campenhout H, Van Damme B, Van der Perre G, Dequeker J, Hildebrand T, et al. Morphometric analysis of human bone biopsies: a quantitative structural comparison of histological sections and micro-computed tomography. Bone. 1998;23(1):59–66.
Pereira H, Caridade S, Frias A, Silva-Correia J, Pereira D, Cengiz I, et al. Biomechanical and cellular segmental characterization of human meniscus: Building the basis for tissue engineering therapies. Osteoarthr Cartil. 2014;22(9):1271–81.
Zhu S, Zhu Q, Liu X, Yang W, Jian Y, Zhou X et al. Three-dimensional reconstruction of the microstructure of human acellular nerve allograft. Sci Rep. 2016;6:30694. doi:10.1038/srep30694.
Schambach SJ, Bag S, Schilling L, Groden C, Brockmann MA. Application of micro-CT in small animal imaging. Methods. 2010;50(1):2–13.
Tremoleda JL, Khalil M, Gompels LL, Wylezinska-Arridge M, Vincent T, Gsell W. Imaging technologies for preclinical models of bone and joint disorders. EJNMMI Res. 2011;1(1):1.
Cox TR, Rumney RM, Schoof EM, Perryman L, Høye AM, Agrawal A, et al. The hypoxic cancer secretome induces pre-metastatic bone lesions through lysyl oxidase. Nature. 2015;522(7554):106–10.
Gibson AL, Mingalone CKH, Foote AT, Uchimura T, Zhang M, Zeng L. Wnt7a inhibits IL-1β induced catabolic gene expression and prevents articular cartilage damage in experimental osteoarthritis. Sci Rep. 2017;7:41823. doi:10.1038/srep41823.
Hu C-H, Sui B-D, Du F-Y, Shuai Y, Zheng C-X, Zhao P, et al. miR-21 deficiency inhibits osteoclast function and prevents bone loss in mice. Sci Rep. 2017;7:43191.
Kusumbe AP, Ramasamy SK, Adams RH. Coupling of angiogenesis and osteogenesis by a specific vessel subtype in bone. Nature. 2014;507(7492):323–8.
Vermeij W, Dollé M, Reiling E, Jaarsma D, Payan-Gomez C, Bombardieri C, et al. Restricted diet delays accelerated ageing and genomic stress in DNA-repair-deficient mice. Nature. 2016;537(7620):427–31.
Boyd SK, Davison P, Müller R, Gasser JA. Monitoring individual morphological changes over time in ovariectomized rats by in vivo micro-computed tomography. Bone. 2006;39(4):854–62.
Geng H, Todd NM, Devlin-Mullin A, Poologasundarampillai G, Kim TB, Madi K, et al. A correlative imaging based methodology for accurate quantitative assessment of bone formation in additive manufactured implants. J Mater Sci: Mater Med. 2016;27(6):1–9.
Xu L, Lv K, Zhang W, Zhang X, Jiang X, Zhang F. The healing of critical-size calvarial bone defects in rat with rhPDGF-BB, BMSCs, and β-TCP scaffolds. J Mater Sci: Mater Med. 2012;23(4):1073–84.
Wongsupa N, Nuntanaranont T, Kamolmattayakul S, Thuaksuban N. Assessment of bone regeneration of a tissue-engineered bone complex using human dental pulp stem cells/poly (ε-caprolactone)-biphasic calcium phosphate scaffold constructs in rabbit calvarial defects. J Mater Sci: Mater Med. 2017;28(5):77.
Liu G, Zhao L, Zhang W, Cui L, Liu W, Cao Y. Repair of goat tibial defects with bone marrow stromal cells and β-tricalcium phosphate. J Mater Sci: Mater Med. 2008;19(6):2367–76.
Fajardo R, Müller R. Three‐dimensional analysis of nonhuman primate trabecular architecture using micro‐computed tomography. Am J Phys Anthropol. 2001;115(4):327–36.
Cardeira J, Gavaia PJ, Fernández I, Cengiz IF, Moreira-Silva J, Oliveira JM, et al. Quantitative assessment of the regenerative and mineralogenic performances of the zebrafish caudal fin. Sci Rep. 2016;6:39191.
Claes JM, Dean MN, Nilsson D-E, Hart NS, Mallefet J. A deepwater fish with ‘lightsabers’–dorsal spine-associated luminescence in a counterilluminating lanternshark. Sci Rep. 2013;3:1308.
Webb SJ, Tu J, Cory E, Morgan V, Sah RL, Deheyn DD et al. Stress physiology and weapon integrity of intertidal mantis shrimp under future ocean conditions. Sci Rep. 2016;6:38637. doi:10.1038/srep38637.
Lee SC, Kim JH, Lee SJ. Floating of the lobes of mosquito (Aedes togoi) larva for respiration. Sci Rep. 2017;7:43050. doi:10.1038/srep43050.
Smith DB, Bernhardt G, Raine NE, Abel RL, Sykes D, Ahmed F et al. Exploring miniature insect brains using micro-CT scanning techniques. Sci Rep. 2016;6:21768. doi:10.1038/srep21768.
van de Kamp T, Vagovič P, Baumbach T, Riedel A. A biological screw in a beetle’s leg. Science. 2011;333(6038):52-.
Cleveland RO, McAteer JA, Müller R. Time-lapse nondestructive assessment of shock wave damage to kidney stones in vitro using micro-computed tomography. J Acoust Soc Am. 2001;110(4):1733–6.
Scherer K, Braig E, Willer K, Willner M, Fingerle AA, Chabior M, et al. Non-invasive differentiation of kidney stone types using X-ray dark-field radiography. Sci Rep. 2015;5:9527.
Dumbravă MD, Rothschild BM, Weishampel DB, Csiki-Sava Z, Andrei RA, Acheson KA et al. A dinosaurian facial deformity and the first occurrence of ameloblastoma in the fossil record. Sci Rep. 2016;6:29271. doi:10.1038/srep29271.
Eriksson ME, Parry LA, Rudkin DM. Earth’s oldest ‘Bobbit worm’–gigantism in a Devonian eunicidan polychaete. Sci Rep. 2017;7:43061. doi:10.1038/srep43061.
Liu Y, Scholtz G, Hou X. When a 520 million-year-old Chengjiang fossil meets a modern micro-CT--a case study. Sci Rep. 2014;5:12802.
Hollister SJ. Porous scaffold design for tissue engineering. Nat Mater. 2005;4(7):518–24.
Indolfi L, Baker AB, Edelman ER. The role of scaffold microarchitecture in engineering endothelial cell immunomodulation. Biomaterials. 2012;33(29):7019–27.
Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials. 2005;26(27):5474–91.
Karande TS, Ong JL, Agrawal CM. Diffusion in musculoskeletal tissue engineering scaffolds: design issues related to porosity, permeability, architecture, and nutrient mixing. Ann Biomed Eng. 2004;32(12):1728–43.
Mastrogiacomo M, Scaglione S, Martinetti R, Dolcini L, Beltrame F, Cancedda R, et al. Role of scaffold internal structure on in vivo bone formation in macroporous calcium phosphate bioceramics. Biomaterials. 2006;27(17):3230–7.
Yang S, Leong K-F, Du Z, Chua C-K. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Eng. 2001;7(6):679–89.
Zeltinger J, Sherwood JK, Graham DA, Müeller R, Griffith LG. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng. 2001;7(5):557–72.
Christen P, Schulte FA, Zwahlen A, Van Rietbergen B, Boutroy S, Melton LJ, et al. Voxel size dependency, reproducibility and sensitivity of an in vivo bone loading estimation algorithm. J R Soc Interface. 2016;13(114):20150991.
Cioffi M, Boschetti F, Raimondi MT, Dubini G. Modeling evaluation of the fluid‐dynamic microenvironment in tissue‐engineered constructs: a micro‐CT based model. Biotechnol Bioeng. 2006;93(3):500–10.
Porter B, Zauel R, Stockman H, Guldberg R, Fyhrie D. 3-D computational modeling of media flow through scaffolds in a perfusion bioreactor. J Biomech. 2005;38(3):543–9.
Zermatten E, Vetsch J, Ruffoni D, Hofmann Boss S, Müller R, Steinfeld A. Micro-computed tomography based modeling of shear stresses in perfused regular and irregular scaffolds. Ann Biomed Eng. 2014;42(5):1085.
Rockwood DN, Preda RC, Yücel T, Wang X, Lovett ML, Kaplan DL. Materials fabrication from Bombyx mori silk fibroin. Nat Protoc. 2011;6(10):1612–31.
Yan L-P, Oliveira JM, Oliveira AL, Caridade SG, Mano JF, Reis RL. Macro/microporous silk fibroin scaffolds with potential for articular cartilage and meniscus tissue engineering applications. Acta Biomater. 2012;8(1):289–301.
Oliveira JM, Silva SS, Malafaya PB, Rodrigues MT, Kotobuki N, Hirose M, et al. Macroporous hydroxyapatite scaffolds for bone tissue engineering applications: physicochemical characterization and assessment of rat bone marrow stromal cell viability. J Biomed Mater Res Part A. 2009;91(1):175–86.
Bouxsein ML, Boyd SK, Christiansen BA, Guldberg RE, Jepsen KJ, Müller R. Guidelines for assessment of bone microstructure in rodents using micro–computed tomography. J Bone Mineral Res. 2010;25(7):1468–86.
Cooper D, Turinsky A, Sensen C, Hallgrimsson B. Effect of voxel size on 3D micro-CT analysis of cortical bone porosity. Calcif Tissue Int. 2007;80(3):211–9.
Kim D-G, Christopherson GT, Dong XN, Fyhrie DP, Yeni YN. The effect of microcomputed tomography scanning and reconstruction voxel size on the accuracy of stereological measurements in human cancellous bone. Bone. 2004;35(6):1375–82.
Longo AB, Salmon PL, Ward WE. Comparison of ex vivo and in vivo micro‐computed tomography of rat tibia at different scanning settings. J Orthop Res. 2016. (Epub ahead of print). doi:10.1002/jor.23435
Morris DE, Mather ML, Simon CG, Crowe JA. Time‐optimized X‐ray micro‐CT imaging of polymer based scaffolds. J Biomed Mater Res Part B: Appl Biomater. 2012;100(2):360–7.
Müller R, Koller B, Hildebrand T, Laib A, Gianolini S, Rüegsegger P. Resolution dependency of microstructural properties of cancellous bone based on three-dimensional mu-tomography. Technol Health Care. 1996;4(1):113–9.
Peng S, Hu Q, Dultz S, Zhang M. Using X-ray computed tomography in pore structure characterization for a Berea sandstone: resolution effect. Journal Hydrol. 2012;472:254–61.
Peyrin F, Salome M, Cloetens P, Laval‐Jeantet A, Ritman E, Rüegsegger P. Micro‐CT examinations of trabecular bone samples at different resolutions: 14, 7 and 2 micron level. Technol Health Care. 1998;6(5, 6):391–401.
Pyka G, Kerckhofs G, Schrooten J, Wevers M. The effect of spatial micro-CT image resolution and surface complexity on the morphological 3D analysis of open porous structures. Mater Charact. 2014;87:104–15.
Cohen J. Statistical power analysis for the behavioral sciences. 2nd edn. Hillsdale, NJ: Lawrence Erlbaum Associates; 1988.
Ellis PD. The essential guide to effect sizes: statistical power, meta-analysis, and the interpretation of research results. UK: Cambridge University Press; 2010.
Acknowledgements
This article is a result of the project FROnTHERA (NORTE-01-0145-FEDER-000023), supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF). IFC thanks the Portuguese Foundation for Science and Technology (FCT) for the Ph.D. scholarship (SFRH/BD/99555/2014). JMO also thanks the FCT for the funds provided under the program Investigador FCT 2012 and 2015 (IF/00423/2012 and IF/01285/2015).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no competing interests.
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Cengiz, I., Oliveira, J. & Reis, R.L. Micro-computed tomography characterization of tissue engineering scaffolds: effects of pixel size and rotation step. J Mater Sci: Mater Med 28, 129 (2017). https://doi.org/10.1007/s10856-017-5942-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10856-017-5942-3