Abstract
(Zn1−xMgx)TiO3 (x = 0.1–0.5) solid solutions were synthesized by solid-state reaction using ZnO, (MgCO3)4·Mg(OH)2·5H2O and TiO2 as raw materials. The influences of Zn: Mg ratio and calcining temperature on the properties of (Zn1−xMgx)TiO3 were studied. By adding CaTiO3 into (Zn1−xMgx)TiO3, the microwave properties and sintering behavior were improved. The ceramics could be sintered at 1150 °C, and the ceramics with excellent microwave properties of τf ≈ ±10 ppm/°C, ε ≈ 24, Q × f > 45000 GHz (8 GHz) were obtained.
Similar content being viewed by others
References
A. Golovchansky, H.T. Kim, Y. Kim, J. Korean Phys. Soc. 32, 1167 (1998)
H.T. Kim, S.H. Kim, S. Nahm, J.D. Byun, J. Am. Ceram. Soc. 82, 3043 (1999)
K. Haga, T. Ishii, J. Mashiyama, T. Ikeda, Jpn. J. Appl. Phys. 31, 3156 (1992)
Y.S. Chang, Y.H. Chang, I.G. Chen, G.J. Chen, Solid State Commun. 128, 203 (2003)
H.T. Kim, S. Nahm, J.D. Byun, Y. Kim, J. Am. Ceram. Soc. 82, 3476 (1999)
A. Templeton, X. Wang, S.J. Penn, S.J. Webb, J. Am. Ceram. Soc. 83, 95 (2000)
D.C. Dube, R. Zurmuhlen, A. Bell, N. Setter, W. Wersing, J. Am. Ceram. Soc. 80, 1095 (1997)
I.R. Abothu, A.V. Prasada, S. Komarneni, Mater. Lett. 38, 186 (1999)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yuan, Y., Zhang, S., Zhou, X. et al. Investigation on the synthesis of (Zn1−xMgx)TiO3 and the modulation effect of CaTiO3 . J Mater Sci: Mater Electron 19, 343–347 (2008). https://doi.org/10.1007/s10854-007-9326-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-007-9326-1