Abstract
The aim of this work was to prepare micro-mesoporous carbon spheres with high specific surface area and large volume of mesopores from porous styrene-co-divinylbenzene ion exchange resin Amberlite XAD-4 beads. Prior to the carbonization step, the mesoporous resin beads were protected by silica formed via impregnation of tetraethylorthosilicate followed by its hydrolysis and condensation. This was essential to obtain highly porous carbon spheres after silica removal that featured the specific surface area up to 1050 m2 g−1 and total pore volume up to 1.35 cm3 g−1. Additional CO2 activation resulted in micro-mesoporous carbon spheres and consequently boosted their adsorption capacity for benzene up to 21–24 mmol g−1 at 20 °C and relative pressure close to unity. Moreover, carbon dioxide adsorption properties of the samples were studied, and the highest uptake of 4.5 mmol g−1 at 0 °C and 1 bar pressure was obtained for the activated carbon. Our findings indicate that the activated carbon spheres exhibit a great potential for capture benzene and related volatile organic compounds.
Similar content being viewed by others
References
Marsh H, Rodriguez-Reinoso F (2006) Activated carbon. Elsevier, Amsterdam
Bansal RC, Goyal M (2005) Activated carbon adsorption. CRC Press, Boca Raton
Jankowska H, Swiatkowski A, Choma J (1991) Active carbon. Ellis Horwood Ltd., Chichester
Bandosz TJ (2006) Activated carbon surfaces in environmental remediation, 1st edn. Elsevier, New York
Choma J, Osuchowski Ł, Jaroniec M (2014) Properties and applications of activated carbons obtained from polymeric materials. Ochrona Srod (in Polish) 36:3–16
Lian F, Xing B, Zhu L (2011) Comparative study on composition, structure, and adsorption behavior of activated carbon derived from different synthetic waste polymers. J Colloid Interface Sci 360:725–730
Makomaski G, Cieslińska W, Zieliński J (2012) Thermal properties of pitch-polymer compositions and derived activated carbons. J Therm Anal Calorim 109:767–772
Choma J, Osuchowski Ł, Marszewski M, Jaroniec M (2014) Highly microporous polymer-based carbons for CO2 and H2 adsorption. RSC Adv 4:14795–14802
Dziura A, Marszewski M, Choma J, de Souza LKC, Osuchowski Ł, Jaroniec M (2014) Saran-derived carbons for CO2 and benzene sorption at ambient conditions. Ind Eng Chem Res 53:15383–15388
Gwardiak S, Szczęśniak B, Choma J, Jaroniec M (2019) Benzene adsorption on synthesized and commercial metal-organic frameworks. J Porous Mater 26:775–783
Szczęśniak B, Osuchowski Ł, Choma J, Jaroniec M (2018) Highly porous carbons obtained by activation of polypyrrole/reduced graphene oxide as effective adsorbents for CO2, H2 and C6H6. J Porous Mater 25:621–627
Oh JY, You YW, Park J, Hong JS, Heo I, Lee CH, Suh JK (2019) Adsorption characteristics of benzene on resin-based activated carbon under humid conditions. J Ind Eng Chem 71:242–249
Wang G, Dou B, Zhang Z, Wang J, Liu H, Hao Z (2015) Adsorption of benzene, cyclohexane and hexane on ordered mesoporous carbon. J Environ Sci 30:65–73
Szczęśniak B, Choma J, Jaroniec M (2018) Effect of graphene oxide on the adsorption properties of ordered mesoporous carbons toward H2, C6H6, CH4 and CO2. Micropor Mesopor Mat 261:105–110
Ryoo R, Joo SH, Jun S (1999) Synthesis and highly ordered carbon molecular sieves via template-mediated structural transformation. J Phys Chem B 103:7743–7746
Li Z, Jaroniec M (2001) Colloidal imprinting: a novel approach to the synthesis of mesoporous carbons. J Am Chem Soc 123:9208–9209
Meng Y, Gu D, Zhang F, Shi Y, Cheng L, Feng D, Wu Z, Chen Z, Wan Y, Stein A, Zhao D (2006) A family of highly ordered mesoporous polymer resin and carbon structures from organic-organic self-assembly. Chem Mater 18:4447–4464
Wang X, Liang C, Dai S (2008) Facile synthesis of ordered mesoporous carbons with high thermal stability by self-assembly of resorcinol-formaldehyde and block copolymers under highly acidic conditions. Langmuir 24:7500–7505
Kierys A, Dziadosz M, Goworek J (2010) Polymer/silica composite of core-shell type by polymer swelling in TEOS. J Colloid Interf Sci 349:361–365
Krasucka P, Stefaniak W, Kierys A, Goworek J (2016) One-pot synthesis of two different highly porous silica materials. Micropor Mesopor Mater 221:14–22
Wang B, Zhu C, Zhang Z, Zhang W, Chen X, Sun N, Wei W, Sun Y, Ji H (2016) Facile, low-cost, and sustainable preparation of hierarchical porous carbons from ion exchange resin: an improved potassium activation strategy. Fuel 179:274–280
You YW, Moon EH, Heo I, Park H, Hong JS, Suh JK (2017) Preparation and characterization of porous carbons from ion-exchange resins with different degree of cross-linking for hydrogen storage. J Ind Eng Chem 45:164–170
Wang Y, Zuo S, Zhu Y, Shao Q, Ni Y (2014) Role of oxidant during phosphoric acid activation of lignocellulosic material. Carbon 66:734–737
Mughal F, Baldock SJ, Karimiani EG, Telford N, Goddard NJ, Day PJR (2014) Microfluidic channel-assisted screening of hematopoietic malignancies. Genes Chromosom Cancer 53:255–263
Ke F, Yi J, Zhang S, Zhou S, Ravikovitch PI, Kruk M (2019) Structures and dimensions of micelle-templated nanoporous silicas derived from swollen spherical micelles of temperature-dependent size. J Colloid Interface Sci 544:312–320
Jaroniec M, Kruk M, Olivier JP (1999) Standard nitrogen adsorption data for characterization of nanoporous silicas. Langmuir 15:5410–5413
Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–319
Gregg SJ, Sing KSW (1982) Adsorption: surface area and porosity, 2nd edn. Academic Press, New York
Jagiello J, Olivier JP (2013) 2D-NLDFT adsorption models for carbon slit-shaped pores with surface energetical heterogeneity and geometrical corrugation. Carbon 55:70–80
Jagiello J, Olivier JP (2013) Carbon slit pore model incorporating surface energetical heterogeneity and geometrical corrugation. Adsorption 19:777–783
Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquerol J, Sing KSW (2015) Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl Chem 87:1051–1069
Choma J, Marszewski M, Osuchowski L, Jagiello J, Dziura A, Jaroniec M (2015) Adsorption properties of activated carbons prepared from waste CDs and DVDs. ACS Sustain Chem Eng 3:733–742
Wang X, Ma C, Xiao J, Xia Q, Wu J, Li Z (2018) Benzene/toluene/water vapor adsorption and selectivity of novel C-PDA adsorbents with high uptakes of benzene and toluene. Chem Eng J 335:970–978
Acknowledgements
JC and BS acknowledge the National Science Centre (Poland) for support of this research under Grant UMO-2016/23/B/ST5/00532.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Osuchowski, Ł., Szczęśniak, B., Choma, J. et al. High benzene adsorption capacity of micro-mesoporous carbon spheres prepared from XAD-4 resin beads with pores protected effectively by silica. J Mater Sci 54, 13892–13900 (2019). https://doi.org/10.1007/s10853-019-03869-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-019-03869-y