Abstract
The empirical approach to creep, termed θ-projection concept, is applied to the constant-load data of conventionally cast nickel-base superalloy IN-100 at constant temperature (900 °C). The normal creep curves, obtained at various initial stresses (σA = 200−400 MPa), could be accurately represented by this concept. The change in creep curve shape with stress from tertiary dominated to primary dominated view is presented by the change in the ratio of primary (ɛp) and tertiary strain (ɛt) components to rupture strain (ɛR). It is predicted that failure in the present creep conditions is dominated by the GB cavitation and the growth of the cavities is controlled by the coupled GB diffusion and power-law creep mechanism. In an attempt to provide a physical significance to θ-parameters, it is found that the internal structural variable theory and continuous GB cavitation account well, with suitable assumptions, for the θ description of primary and tertiary creep curves, respectively.
Similar content being viewed by others
References
Evans M (2000) J Strain Anal 35:389
Evans RW (1989) Mater Sci Technol 5:699–707
Larson FR, Miller J (1952) Trans ASME 74:756
Orr RL, Sherby OD, Dorn JE (1945) Trans ASM 46:113
Manson SS, Haferd AM (1953) NACA. TN 2890, March
Evans RW, Parker JD, Wilshire B (1982) In: Wilshire B, Owen DRJ (eds) Recent advances in creep and fracture of engineering materials and structures. Pineridge Press, Swansea, Swansea, p 135
Wilshire B (1989) New lamp's for old. In: Taplin DMR, Knott JF, Lewis MH (eds) Second Parsons International Turbine Conference on the “Materials Development in Turbo-Machinary Design”. The Institute of Metals, London, Parsons Press, Trinity College, Dublin, pp 263–268
Evans RW, Wilshire B (1985) Creep of metals and alloys. The Institute of Metals, London
Evans RW (2000) Mater Sci Technol 16:6
Beden I, Brown SGR, Evans RW, Wilshire B (1987) Res Mech 22:45
Evans RW, Brown SGR, Wilshire B (1986) Mater Sci Eng 84:147
Evans RW, Scharning PJ, Wilshire B (1985) In: Wilshire B, Evans RW (eds) Creep behaviour of crystalline solids. Pineridge Press, Swansea, p 201
Evans RW, Murakami T, Wilshire B (1988) Trans J Br Ceram Soc 87:54
Li G, Sakai T, Endo T (1987) An Application of Creep Time Law to the Life Prediction of a Nickel-Base Superalloy. In: Proceedings of the Third International Conference on the “Creep and Fracture of Engineering Materials and Structures”, held at University College, Swansea, 5–10 April, 1987, pp 803–813
Frost HJ, Ashby MF (1982) Deformation-mechanism maps. Pergamon Press, Oxford, p 1
Brown SGR, Evans RW, Wilshire B (1987) Mater Sci Technol 3:23
Evans RW, Fadlalla AA, Wilshire B (1990) In: Wilshire B, Evans RW (eds) Proceedings of the 4th international conference on “Creep and Fracture of Engineering Materials and Structures”. Swansea, The Institute of Materials, London, p 1009
Evans RW, Wilshire B (1987) Power law creep of polycrystalline copper. In: Wilshire B, Evans RW (eds) Proceedings of the Third International Conference on “Creep and Fracture of Engineering Materials and Structures” held at University College, Swansea, UK, 5–10 April 1987. Inst. of Metals, London, pp 59–70
Evans RW, Wilshire B (1987) Mater Sci Technol 3:701
Nix WD, Gibling JC (1983) Mechanisms of time dependent flow and fracture. The American Society for Metals, Metals Park
Evans M (2000) J Mater Sci 35:2937
Evans RW (2000) Proc R Soc Lond A 436:835
Cottrell AH, Aytekin V (1950) JIM 77:389
Evans RW, Wilshire B (1996) In: Krausz AS, Krauss K (eds) Unified constitutive laws of deformation. Academic Press, p 108
Baldan A (1998) J Mater Sci 33:3629
Baldan A (1991) J Mater Sci 26:3409
Perry AJ (1974) J Mater Sci 9:1016
Dennison JP, Wilshire B (1962) J Inst Metals 91:343
Williams KR, Wilshire B (1977) Mater Sci Eng 28:289
Ashby MF, Dyson BF (1984) In: Valluri SR, Taplin DMR, Rama Rao P, Knott JF, Dubey R (eds) Proceedings of the 6th international conference on fracture (ICF6), New Delhi, India, vol 1. Pergamon Press, Exeter, p 3
Leckie FA, Hayhurst DR (1977) Acta Metall 25:1059
Needleman A, Rice JR (1980) Acta Metall 28:1315
Edward GH, Ashby MF (1979) Acta Metall 27:1505
Cocks ACF, Ashby MF (1982) Progr Mater Sci 27:189
Frost HJ, Ashby MF (1982) Deformation mechanism maps, the plasticity and creep of metals and ceramics. Pergamon Press, Oxford, p 55
Mott NF, Nabarro FRN (1948) Strength of solids. Physical Society, London, p 1
Mott NF (1953) Phil Mag 44:742
Nix WD, Ilschner B (1979) In: Haasen P, Gerold V, Kostorz G (eds) Proceedings of the 5th international conference on strength of metals and alloys ICMA5, Aachen, vol 3. Pergamon Press, Oxford, p 1503
McLean D (1966) Rep Prog Phys 29:1
Lagneborg R (1969) Met Sci J 3:161
Boettner RC, Robertson WD (1961) Trans AIME 221:613
Bowring P, Davies PW, Wilshire B (1968) Metal Sci J 2:168
Harris JE, Tucker MO, Greenwood GW (1974) Metal Sci 8:311
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Baldan, A., Tascioglu, E. Assessment of θ-projection concept and fracture cavitation. J Mater Sci 43, 4592–4606 (2008). https://doi.org/10.1007/s10853-008-2666-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-2666-2