Skip to main content
Log in

Effect of the grain boundary on the evolution of deformation in a bicrystal

  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

The role of grain boundary constraint in strain localization and concomitant constitutive response was examined by performing a series of uniaxial compression tests on a tantalum bicrystal. Tantalum single crystals were diffusion bonded to form a (011) 90^∘ twist boundary that was compressed along the common [011] direction. The plastic deformation resulted in the creation of deformation bands away from the highly constraining grain boundary, resembling those bands known from single crystal plastic deformation. Near the grain boundary, such deformation band formation could not be detected. Instead a distinctive pattern of crystal lattice rotation was observed that filled a rather large volume (several millimeters in size) around the bicrystal grain boundary. The internal deformation band structure as well as the crystal lattice rotation pattern near the bicrystal grain boundary were characterized and found to give greater rates of work hardening in the neighborhood of the grain boundary.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. M. KUMAR, A. J. SCHWARTZ and W. E. KING, Acta Mater 50 (2002) 2599.

    Article  Google Scholar 

  2. Idem, Mater. Sci. Eng. A 309/310 (2001) 78.

    Article  Google Scholar 

  3. M. KUMAR, K. J. BLOBAUM and J. S. STOLKEN (unpublished results).

  4. A. J. SCHWARTZ, W. E. KING, G. H. CAMPBELL, J. S. STOLKEN, D. H. LASSILA, S. SUN and B. L. ADAMS, in “Fracture and Ductile vs. Brittle Behavior; Theory, Modeling & Experiment, ” edited by G. E. Beltz, R. L. Blumberg-Selinger, M. P. Marder and K.-S. Kim (Materials Research Society, Pittsburgh, PA, 1999) p. 221

  5. Idem, ASME J. Eng. Mater. Tech 121 (1999) 178.

    Google Scholar 

  6. A. J. SCHWARTZ, J. S. STOLKEN, W. E. KING and G. H. CAMPBELL, Mater. Sci. Eng. A 317 (2001) 77.

    Article  Google Scholar 

  7. W. L. WIEN, G. H. CAMPBELL and W. E. KING, in “Microstructural Science, ” edited by D. W. Stevens, E. A. Clark, D. C. Zipperian and E. D. Albrecht (ASM International, Materials Park, OH, 1996) p. 213.

  8. F. C. FRANK, Metall. Trans. A 19 (1988) 403.

    Google Scholar 

  9. W. BOLLMANN, in “Crystal Defects and Crystalline Interfaces” (Springer-Verlag, Berlin, 1970).

    Google Scholar 

  10. W. E. KING, G. H. CAMPBELL, A. W. COOMBS, G. W. JOHNSON, B. E. KELLY, T. C. REITZ, S. L. STONER, W. L. WIEN and D. M. WILSON, in “Joining and Adhesion of Advanced Inorganic Materials, ” edited by A. H. Carim, D. S. Schwartz and R. S. Silberglitt (Materials Research Society, Pittsburgh, PA, 1993) p. 61.

  11. R. L. SMIALEK and T. E. MITCHELL, Philos. Mag 22 (1970) 1105.

    Google Scholar 

  12. W. F. HOSFORD JR., Trans. Metall. Soc. AIME 230 (1964) 12.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Ziegler, A., Campbell, G.H., Kumar, M. et al. Effect of the grain boundary on the evolution of deformation in a bicrystal. J Mater Sci 40, 3225–3229 (2005). https://doi.org/10.1007/s10853-005-2689-x

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-005-2689-x

Keywords

Navigation