Skip to main content
Log in

Electron beam evaporated carbon nanotube dispersed SnO2 thin film gas sensor

  • Section 3: Functional Ceramics
  • Published:
Journal of Electroceramics Aims and scope Submit manuscript

Abstract

Carbon nanotube (CNT) is a useful material for gas-sensing applications because of its high surface to volume ratio structure. In this work, multi-wall CNTs are incorporated into tin oxide thin film by means of powder mixing and electron beam evaporation and the enhancement of gas-sensing properties is presented. The CNTs were combined with SnO2powder with varying concentration in the range of 0.25–5% by weight and electron beam evaporated onto glass substrates. From AFM and TEM characterization, CNT inclusion in SnO2thin film results in the production of circular cone protrusions of CNT clusters or single tube coated with SnO2layer. Experimental results indicate that the sensitivity to ethanol of SnO2thin film increases by the factors of 3 to 7, and the response time and recovery time were reduced by the factors of 2 or more with CNT inclusion. However, if the CNT concentration is too high, the sensitivity is decreased. Moreover, the CNT doped film can operate with good sensitivity and stability at a relatively low temperature of 250–300C. The improved gas-sensing properties should be attributed to the increasing of surface adsorption area of metal oxide produced by CNT protrusion.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. E. Zampiceni, E. Comini, G. Faglia, G. Sberveglieri, S. Kaciulis, L. Pandolfi, and S. Viticoli, Sensors and Actuators, B89, 225 (2003).

    CAS  Google Scholar 

  2. I. Jimnez, J. Arbiol, G. Dezanneau, A. Cornet, and J.R. Morante, Sensors and Actuators, B93, 475 (2003).

    Google Scholar 

  3. K. Aguir, C. Lemire, and D.B.B. Lollman, Sensors and Actuators, B84, 1 (2002).

    CAS  Google Scholar 

  4. T. Hyodo, N. Nishida, Y. Shimizu, and M. Egashira, Sensors and Actuators, B83, 209 (2002).

    CAS  Google Scholar 

  5. T. Oyabu, J. Appl. Phys., 53, 2785 (1981).

    Article  Google Scholar 

  6. H. Madhusudhana and N. Chanodrkar, Sensors and Actuators, B9, 1 (1992).

    Google Scholar 

  7. M. Ivanovskaya, P. Bogdanov, G. Faglia, P. Nelli, G. Sberveglieri, and A. Taroni, Sensors and Actuators, B77, 268 (2001).

    CAS  Google Scholar 

  8. S. Shukla, S. Seal, L. Ludwig, and C. Parish, Sensors and Actuators, B97, 256 (2004).

    CAS  Google Scholar 

  9. D.E. Morton and A. Dinca, in Proceeding of the 42 nd Annual Technical Conference of the Society of Vacuum Coater (Chicago, 1999), pp. 16–22.

  10. A. Wisitsoraat, A. Tuantranont, V. Patthanasettakul, T. Lomas, and C. Pakabut, in Proceeding of the 1 st International Conference on Smart Material (Chiangmai, Thailand, 2004), pp. 1–3.

  11. J. Gong and Q. Chen, in Technical Proceedings of the 2004 NSTI Nanotechnology Conference and Trade Show, vol 3, p. 561.

  12. S. Thongthem and P. Singjai, in 10th Joint Vacuum Conference (Slovenia, 2004).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Wisitsoraat.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wisitsoraat, A., Tuantranont, A., Thanachayanont, C. et al. Electron beam evaporated carbon nanotube dispersed SnO2 thin film gas sensor. J Electroceram 17, 45–49 (2006). https://doi.org/10.1007/s10832-006-9934-9

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10832-006-9934-9

Keywords

Navigation