Skip to main content
SpringerLink
Log in

Exploration of effect of delignification on the mesopore structure in poplar cell wall by nitrogen absorption method

  • Original Research
  • Published:
Cellulose Aims and scope Submit manuscript

Abstract

As an important commodity wood material, poplar has porous structure, which is worthy of being investigated. Especially, the lignin concentration is closely related to the formation and change of pores. Although a few studies reported the relation between the pore volume and the lignin removal of the ground wood (Stone and Scallan in J Polym Sci C Polym Symp 11(1):13–25, 1965), no information of the distribution of pore sizes versus the whole delignification process steps was reported. This study initially explored the effect of delignification level on the pore size distribution and pore structure in poplar cell walls using nitrogen absorption measurement. It was found that delignification increased the N2 adsorption amount and specific surface area of poplar. It also caused a large number of mesopores in the cell wall, mainly in the 2–10 nm pore size range, and decreased the average pore size. The whole delignification process can be roughly divided into three major phases, namely, the initial phase, the transitional phase and the stable phase, in which, the change process was not completely uniform. During the delignification, the size of poplar cell wall pores continued reducing, and finally a large number of uniform pores of about 2.1 nm was formed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  • Akitomo M, Suzuki R, Ishimaru Y, Iida I, Furuta Y (2006) Micropore structure of wood and bamboo charcoals: establishment of a method for the calculation of effective pore size distribution and the possibility of controlling micropore structure. J Jpn Wood Res Soc (Jpn) 56:107–111

    Google Scholar 

  • Alince B, Van de Ven TGM (1997) Porosity of swollen pulp fibers evaluated by polymer adsorption. Fundam Papermak Mater 2:771–788

    CAS  Google Scholar 

  • Barrett EP, Joyner LG, Halenda PP (1951) The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms. J Am Chem Soc 73(1):373–380

    CAS  Google Scholar 

  • Basso MC, Cerrella EG, Cukierman AL (2005) Cadmium uptake by lignocellulosic materials: effect of lignin content. Sep Sci Technol 39(5):1163–1175

    Google Scholar 

  • Borrega M, Kärenlampi PP (2011) Cell wall porosity in Norway spruce wood as affected by high-temperature drying. Wood Fiber Sci 43(2):206–214

    CAS  Google Scholar 

  • Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(2):309–319

    CAS  Google Scholar 

  • Carrott PJM, Carrott MR (2007) Lignin—from natural adsorbent to activated carbon: a review. Biores Technol 98(12):2301–2312

    Google Scholar 

  • Chang SS, Clair B, Ruelle J, Beauchêne J, Di Renzo F, Quignard F, Gril J (2009) Mesoporosity as a new parameter for understanding tension stress generation in trees. J Exp Bot 60(11):3023–3030

    CAS  PubMed  Google Scholar 

  • Chang SS, Hu J, Bruno C, Françoise Q (2011a) Pore structure characterization of poplar tension wood by nitrogen adsorption–desorption method. Sci Silvae Sin 47(10):134–140

    Google Scholar 

  • Chang S, Hu J, Zhao G (2011b) Effects of different drying pretreatments on pore structure of poplar tension wood. J Beijing For Univ 33(2):91–95

    Google Scholar 

  • Chang SS, Quignard F, Alméras T, Clair B (2015) Mesoporosity changes from cambium to mature tension wood: a new step toward the understanding of maturation stress generation in trees. New Phytol 205(3):1277–1287

    CAS  PubMed  Google Scholar 

  • Dawson BS, Pearson H (2017) Effect of supercritical CO2 dewatering followed by oven-drying of softwood and hardwood timbers. Wood Sci Technol 51(4):771–784

    CAS  Google Scholar 

  • Deshpande AS, Burgert I, Paris O (2006) Hierarchically structured ceramics by high-precision nanoparticle casting of wood. Small 2(8–9):994–998

    CAS  PubMed  Google Scholar 

  • Dietrich D, Lampke T, Rößler R (2013) A microstructure study on silicified wood from the Permian Petrified Forest of Chemnitz. Paläontol Z 87(3):397–407

    Google Scholar 

  • Dietrich D, Viney M, Lampke T (2015) Petrifactions and wood-templated ceramics: comparisons between natural and artificial silicification. IAWA J 36(2):167–185

    Google Scholar 

  • Dizhbite T, Zakis G, Kizima A, Lazareva E, Rossinskaya G, Jurkjane V, Viesturs U (1999) Lignin—a useful bioresource for the production of sorption-active materials. Biores Technol 67(3):221–228

    Google Scholar 

  • Donaldson LA, Cairns M, Hill SJ (2018) Comparison of micropore distribution in cell walls of softwood and hardwood xylem. Plant Physiol 178(3):1142–1153

    CAS  PubMed  PubMed Central  Google Scholar 

  • Duncan DB (1955) Multiple range and multiple F tests. Biometrics 11(1):1–42

    Google Scholar 

  • Fahlén J, Salmén L (2005) Pore and matrix distribution in the fiber wall revealed by atomic force microscopy and image analysis. Biomacromol 6(1):433–438

    Google Scholar 

  • Fink S (1992) Transparent wood—a new approach in the functional study of wood structure. Holzforsch Int J Biol Chem Phys Technol Wood 46(5):403–408

    CAS  Google Scholar 

  • Franklin GL (1945) Preparation of thin sections of synthetic resins and wood–resin composites, and a new macerating method for wood. Nature 155(3924):51

    Google Scholar 

  • Fromm J, Rockel B, Lautner S, Windeisen E, Wanner G (2003) Lignin distribution in wood cell walls determined by TEM and backscattered SEM techniques. J Struct Biol 143(1):77–84

    CAS  PubMed  Google Scholar 

  • Galarneau A, Desplantier D, Dutartre R, Di Renzo F (1999) Micelle-templated silicates as a test bed for methods of mesopore size evaluation. Microporous Mesoporous Mater 27(2–3):297–308

    CAS  Google Scholar 

  • Groen JC, Pérez-Ramírez J (2004) Critical appraisal of mesopore characterization by adsorption analysis. Appl Catal A General 268(1–2):121–125

    CAS  Google Scholar 

  • He Y, Li Z, Xi H, Guo J, Xia Q (2004) Research progress of gas–solid adsorption isotherms. Ion Exch Adsorpt 20:376–384

    Google Scholar 

  • Innes WB (1957) Use of parallel plate model in calculation of pore size distribution. Anal Chem 29(7):1069–1073

    CAS  Google Scholar 

  • Ishizawa CI, Davis MF, Schell DF, Johnson DK (2007) Porosity and its effect on the digestibility of dilute sulfuric acid pretreated corn stover. J Agric Food Chem 55(7):2575–2581

    CAS  PubMed  Google Scholar 

  • Kimura M, Qi ZD, Fukuzumi H, Kuga S, Isogai A (2014) Mesoporous structures in never-dried softwood cellulose fibers investigated by nitrogen adsorption. Cellulose 21(5):3193–3201

    CAS  Google Scholar 

  • Kimura M, Qi ZD, Isogai A (2016) Analysis of mesopore structures in wood cell walls and pulp fibers by nitrogen adsorption method. Nord Pulp Pap Res J 31(2):198–204

    CAS  Google Scholar 

  • Kojiro K, Furuta Y, Ishimaru Y (2008) Influence of heating and drying history on micropores in dry wood. J Wood Sci 54(3):202–207

    Google Scholar 

  • Kojiro K, Miki T, Sugimoto H, Nakajima M, Kanayama K (2010) Micropores and mesopores in the cell wall of dry wood. J Wood Sci 56(2):107–111

    CAS  Google Scholar 

  • Masthan SK, Rao KR, Prasad PS, Rao PK (1992) Derivation of the expanded form of the BJH equation and its application to the pore structure analysis of mesoporous adsorbents. Adsorpt Sci Technol 9(4):212–230

    CAS  Google Scholar 

  • Meng X, Foston M, Leisen J, DeMartini J, Wyman CE, Ragauskas AJ (2013) Determination of porosity of lignocellulosic biomass before and after pretreatment by using Simons’ stain and NMR techniques. Biores Technol 144:467–476

    CAS  Google Scholar 

  • Meng X, Wells T, Sun Q, Huang F, Ragauskas A (2015) Insights into the effect of dilute acid, hot water or alkaline pretreatment on the cellulose accessible surface area and the overall porosity of Populus. Green Chem 17(8):4239–4246

    CAS  Google Scholar 

  • Mizutani M, Takase H, Adachi N, Ota T, Daimon K, Hikichi Y (2005) Porous ceramics prepared by mimicking silicified wood. Sci Technol Adv Mater 6(1):76

    CAS  Google Scholar 

  • Monteiro G (2018) Structural characterization of heat treated poplar wood. U Porto J Eng 4(1):9–26

    Google Scholar 

  • Nakatani T, Ishimaru Y, Iida I, Furuta Y (2008) Micropore structure of wood: change in micropore structure accompanied by delignification. J Wood Sci 54(3):252–255

    CAS  Google Scholar 

  • Persson PV, Fogden A, Hafrén J, Daniel G, Iversen T (2004a) Silica-cast replicas for morphology studies on spruce and birch xylem. IAWA J 25(2):155–164

    Google Scholar 

  • Persson PV, Hafrén J, Fogden A, Daniel G, Iversen T (2004b) Silica nanocasts of wood fibers: a study of cell-wall accessibility and structure. Biomacromol 5(3):1097–1101

    CAS  Google Scholar 

  • Quirk JP (1955) Significance of surface areas calculated from water vapor sorption isotherms by use of the BET equation. Soil Sci 80(6):423–430

    CAS  Google Scholar 

  • Rouquerol J, Rouquerol F, Llewellyn P, Maurin G, Sing KS (2013) Adsorption by powders and porous solids: principles, methodology and applications. Academic Press, Berlin

    Google Scholar 

  • Ruelle J (2014) Morphology, anatomy and ultrastructure of reaction wood. In: Gardiner B, Barnett J, Saranpää P, Gril J (eds) The biology of reaction wood. Springer, Berlin, pp 13–35

    Google Scholar 

  • Sarkar P, Auer M (2017) Organization of the plant cell wall. Mol Cell Biol Growth Differ Plant Cells 101:1550–1568

    Google Scholar 

  • Scallan AM (1978) Fibre-water interactions in paper-making. Trans Symp Oxford 1:9–27

    CAS  Google Scholar 

  • Shi J, Avramidis S (2018) Dried cell wall nanopore configuration of Douglas-fir, western red cedar and aspen heartwoods. Wood Sci Technol 52(4):1025–1037

    CAS  Google Scholar 

  • Sing KS (1985) Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure Appl Chem 57(4):603–619

    CAS  Google Scholar 

  • Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D, Crocker D (2010) Determination of structural carbohydrates and lignin in biomass. Laboratory Analytical Procedure (TP-510-42618)

  • Stone JE (1964) The porous structure of wood and fibres. Pulp Pap Mag Can 65(1):T3–T13

    CAS  Google Scholar 

  • Stone JE, Scallan AM (1965) Effect of component removal upon the porous structure of the cell wall of wood. J Polym Sci C Polym Symp 11(1):13–25

    Google Scholar 

  • Stone JE, Scallan AM (1968) The effect of component removal upon the porous structure of the cell wall of wood. Part III. A comparison between the sulphite and kraft processes. Pulp Pap Mag Can 6:69–74

    Google Scholar 

  • Wang X, Liu Z, Zhang Y, Pan B (2018a) Characterization methods of wood ultrastructure and its research progress. Chem Ind Prod 38(2):1–10

    Google Scholar 

  • Wang X, Zhan T, Liu Y, Shi J, Pan B, Zhang Y, Shi SQ (2018b) Large-size transparent wood for energy-saving building applications. ChemSusChem 11(23):4086–4093

    CAS  PubMed  Google Scholar 

  • Wu J, Wu Y, Yang F, Tang C, Huang Q, Zhang J (2019) Impact of delignification on morphological, optical and mechanical properties of transparent wood. Compos A Appl Sci Manuf Appl Sci Manuf 117:324–331

    CAS  Google Scholar 

  • Yin J, Song K, Lu Y, Zhao G, Yin Y (2015) Comparison of changes in micropores and mesopores in the wood cell walls of sapwood and heartwood. Wood Sci Technol 49(5):987–1001

    CAS  Google Scholar 

  • Zhu M, Song J, Li T, Gong A, Wang Y, Dai J, Hu L (2016) Highly anisotropic, highly transparent wood composites. Adv Mater 28(26):5181–5187

    CAS  PubMed  Google Scholar 

Download references

Acknowledgments

The authors are thankful for financial support from the National Strategic Research and Development Program of China (2017YFD0600202), and the National Natural Science Foundation of China (31670558).

Author information

Authors and Affiliations

  1. College of Material Science and Engineering, Nanjing Forestry University, Nanjing, 210037, People’s Republic of China

    Rui Liang, Yu-Hui Zhu, Liang Wen, Wan-Wan Zhao, Bing-Bin Kuai, Yao-Li Zhang & Li-Ping Cai

  2. Department of Mechanical and Energy Engineering, University of North Texas, Denton, TX, 76203, USA

    Li-Ping Cai

Authors
  1. Rui Liang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu-Hui Zhu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Liang Wen
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Wan-Wan Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Bing-Bin Kuai
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yao-Li Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Li-Ping Cai
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yao-Li Zhang.

Ethics declarations

Conflict of interest

All authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liang, R., Zhu, YH., Wen, L. et al. Exploration of effect of delignification on the mesopore structure in poplar cell wall by nitrogen absorption method. Cellulose 27, 1921–1932 (2020). https://doi.org/10.1007/s10570-019-02921-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10570-019-02921-z

Keywords

Search

Navigation