Abstract
Primary aliphatic amines were introduced into most of (>95%) carboxyl groups densely present on the TEMPO-oxidized cellulose nanofibril (TOCN) surfaces via carboxyl/amine salt formation in a water-isopropyl alcohol mixture. The carbon number of alkyl chain lengths introduced into TOCN varied using n-decyl-, n-dodecyl, n-tetradecyl-, n-hexadecyl- and n-octadecyl-amines. When n-dodecyl-, n-tetradecyl- and n-hexadecyl-amines were used for neutralization of carboxyl groups, the TOCN-COOH/amine salts were dispersed at the individual nanofibril level in pure isopropyl alcohol (IPA) by ultrasonication treatment, and gave stable and transparent IPA dispersions with birefringence when observed between cross polarizers. Flexible, highly transparent and surface-hydrophobic self-standing films of n-dodecylamine-treated TOCN-COOH (TOCN-COOH/C12-amine salt) were prepared by casting and drying of the dispersion. However, the introduction of abundant long-alkyl chains on the TOCN surfaces via the amine salt formation resulted in clearly lower mechanical and oxygen barrier properties of the films than those of TOCN-COONa films.
Similar content being viewed by others
References
Azizi SMAS, Alloin F, Sanchez JY, Kissi NE, Dufresne A (2004) Preparation of cellulose whiskers reinforced nanocomposites from an organic medium suspension. Macromolecules 37:1386–1393
Berg OVD, Capadona JR, Weder C (2007) Preparation of homogeneous dispersions of tunicate cellulose whiskers in organic solvent. Biomacromolecules 8:1353–1357
Cavaillé B, Heux L, Cavaillé JY, Lindner P, Dewhurst C, Terech P (2002) Rodlike cellulose whiskers coated with surfactant: a small-angle neutron scattering characterization. Langmuire 18:3311–3314
de Souza Lima MM, Borsali R (2004) Rodlike cellulose microcrystals: structure, properties, and applications. Macromol Rapid Commun 25:771–787
Fujisawa S, Okita Y, Saito T, Togawa E, Isogai A (2011a) Formation of N-acylureas on the surface of TEMPO-oxidized cellulose nanofibril with carbodiimide in DMF. Cellulose 18:1191–1199
Fujisawa S, Okita Y, Fukuzumi H, Saito T, Isogai A (2011b) Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups. Carbohydr Polym 61:414–419
Fukuzumi H, Saito T, Iwata T, Kumamoto Y, Isogai A (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10:162–165
Fukuzumi H, Saito T, Iwamoto S, Kumamoto Y, Ohdaira T, Suzuki R, Isogai A (2011) Pore size determination of TEMPO-oxidized cellulose nanofibril films by positron annihilation lifetime spectroscopy. Biomacromolecules 12:4057–4062
Heux L, Chauve G, Bonini C (2000) Nonflocculating and chiral-nematic self-ordaring of cellulose microcrystals suspensions in nonpolar solvents. Langmuire 16:8210–8212
Isogai A, Saito T, Fukuzumi H (2010) TEMPO-oxidized cellulose nanofibers. Nanoscale 3:71–85
Iwamoto S, Kai W, Iwata T, Isogai A (2009) Elastic modulus of single cellulose nanofibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10:2571–2576
Johnson RK, Zink-sharp A, Glasser WG (2011) Preparation and characterization of hydrophobic derivatives of TEMPO-oxidized nanocelluloses. Cellulose 18:1599–1609
Ljungberg N, Bonini C, Bortolussi F, Boisson C, Heux L, Cavaillé JY (2005) New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. Biomacromolecules 6:2732–2739
Ljungberg N, Cavaillé JY, Heux L (2006) Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers. Polymer 47:6285–6292
Nishino T, Takano K, Nakamae K (1995) Elastic modulus of the crystalline regions of cellulose polymorphs. J Polym Sci Part B 33:1647–1651
Okita Y, Saito T, Isogai A (2010) Entire surface oxidation of various cellulose microfibrils by TEMPO-mediated oxidation. Biomacromolecules 11:1696–1700
Okita Y, Fujisawa S, Saito T, Isogai A (2011) TEMPO-oxidized cellulose nanofibrils dispersed in organic solvents. Biomacromolecules 12:518–522
Paul DR, Robeson LM (2008) Polymer nanotechnology: nanocomposites. Polymer 49:3187–3204
Saito T, Isogai A (2004) TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromolecules 5:1983–1989
Saito T, Nishiyama Y, Putaux JL, Vignon M, Isogai A (2006) Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7:1687–1691
Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8:2485–2491
Saito T, Hirota M, Tamura N, Kimura S, Fukuzumi H, Heux L, Isogai A (2009) Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions. Biomacromolecules 10:1992–1996
Saito T, Uematsu T, Kimura S, Enomae T, Isogai A (2011) Self-aligned integration of native cellulose nanofibrils towards producing diverse bulk materials. Soft Matter 7:8804–8809
Saxena IM, Brown RM Jr (2005) Cellulose biosynthesis: current views and evolving concepts. Ann Bot 96:9–21
Yano H, Sugiyama J, Nakagaito AN, Nogi M, Matsuura T, Hikita M, Handa K (2005) Optically transparent composite reinforced with networks with bacterial nanofibers. Adv Mater 17:153–155
Acknowledgment
This research was supported by the Japan Society for the Promotion of Science (JSPS), Grant-in-Aid for Scientific Research (Grant numbers 21228007 and 23-3027).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fujisawa, S., Saito, T. & Isogai, A. Nano-dispersion of TEMPO-oxidized cellulose/aliphatic amine salts in isopropyl alcohol. Cellulose 19, 459–466 (2012). https://doi.org/10.1007/s10570-011-9648-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-011-9648-2