Abstract
This paper summarizes an extensive experimental and prediction study of thermal conductivities of three-dimensional woven composites (3DWCs). Three kinds of innovative 3D woven architectures are examined, including 2.5D angle-interlock, 2.5D angle-interlock (with warp reinforcement), and 3D orthogonal woven architectures. The differences of thermal behaviors of 3DWCs in plane and out of plane are assessed by using multi-scale finite element analysis. For the validation of models, the thickness direction thermal conductivity of 3DWCs are measured. It is indicated that the predicted results are in good agreement with the experimental results. The effects of weave density and fabric architecture on the distribution of heat flux and temperature have been discussed in this work, which determined the thermal conductivities of 3DWCs. From this study, it can be expected that the need of thermal performance of 3DWCs can obtained according to optimize the weave parameters based on the high designability of 3DWCs.
Similar content being viewed by others
References
Ma, P., Gao, Z.: A review on the impact tension behaviors of textile structural composites. J Ind Text. 44(4), 572–604 (2015)
Mouritz, A.P., Bannister, M.K., Falzon, P.J., Leong, K.H.: Review of applications for advanced three-dimensional fibre textile composites. Compos Part a-Appl Sci Manufact. 30(12), 1445–1461 (1999)
Provost, B., Boussu, F., Coutellier, D., Vallee, D., Rondot, F., Nussbaum, J.: Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites. J Ind Text. 43(4), 606–626 (2013)
Green, S.D., Long, A.C., Said, B.S.F.E., Hallett, S.R.: Numerical modelling of 3D woven preform deformations. Compos Struct. 108(1), 747–756 (2014)
Jin, L., Hu, H., Sun, B., Gu, B.: Three-point bending fatigue behavior of 3D angle-interlock woven composite. J Compos Mater. 46(8), 883–894 (2012)
Jin, L., Bo, C.J., Kar, N., Nutt, S., Sun, B., Gu, B.: Tension–tension fatigue behavior of layer-to-layer 3-D angle-interlock woven composites. Mater Chem Phys. 140(1), 183–190 (2013)
Ai, S., Zhu, X., Mao, Y., Pei, Y., Fang, D.: Finite element modeling of 3D orthogonal woven C/C composite based on micro-computed tomography experiment. Appl Compos Mater. 21(4), 603–614 (2014)
Pilling, M.W., Yates, B., Black, M.A., Tattersall, P.: The thermal conductivity of carbon fibre-reinforced composites. J Mater Sci. 14(6), 1326–1338 (1979)
Tian, T., Cole, K.D.: Anisotropic thermal conductivity measurement of carbon-fiber/epoxy composite materials. Int J Heat Mass Transf. 55(s 23–24), 6530–6537 (2011)
Gowayed, Y., Hwang, J.C.: Thermal conductivity of composite materials made from plain weaves and 3-D weaves. Compos Eng. 5(9), 1177–1186 (1995)
Sharp, K., Bogdanovich, A.E., Tang, W., Heider, D., Advani, S., Glowiana, M.: High through-thickness thermal conductivity composites based on three-dimensional woven fiber architectures. AIAA J. 46(11), 2944–2954 (2008)
Zhao, S., Zhou, X., Yu, J., Mummery, P.: Fabrication and characterization of 2.5D and 3D SiC f /SiC composites. Fusion Eng Design. 88(9–10), 2453–2456 (2013)
Song, L., Geng, W., Zhao, Y., Chen, X., Li, J.: Thermal conductivities of 2.5 dimensional woven composites. Polym Polym Compos. 24(4), 241–248 (2016)
Ai, S., Fu, H., He, R., Pei, Y.: Multi-scale modeling of thermal expansion coefficients of C/C composites at high temperature. Mater Des. 82, 181–188 (2015)
Schuster, J., Heider, D., Sharp, K., Glowania, M.: Thermal conductivities of three-dimensionally woven fabric composites. Compos Sci Technol. 68(9), 2085–2091 (2008)
Dong, K., Liu, K., Pan, L., Gu, B., Sun, B.: Experimental and numerical investigation on the thermal conduction properties of 2.5D angle-interlock woven composites. Compos Struct. 154, 319–333 (2016)
Chen, L., Yao, X., Cen, S.: Predictions of elastic property on 2.5D C/SiC composites based on numerical modeling and semi-analytical method. Composites Part B-Eng. 74, 53–65 (2015)
Jian-Jun, G., Hu, Z., Yan-Jun, D., Shuguang, L., Wen-Quan, T.: Numerical prediction of effective thermal conductivities of 3D four-directional braided composites. Compos Struct. 125, 499–508 (2015)
McIvor, S.D., Darby, M.I., Wostenholm, G.H., Yates, B., Banfield, L., King, R., et al.: Thermal conductivity measurements of some glass fibre- and carbon fibre-reinforced plastics. J Mater Sci. 25(7), 3127–3132 (1990)
Yu, H., Nonn, A., Schneiders, S., Heider, D., Advani, S.G.: An approach to enhance through-thickness thermal conductivity of polymeric fiber composites. Int J Heat Mass Transf. 59, 20–28 (2013)
Schuster, J., Heider, D., Sharp, K., Glowania, M.: Measuring and modeling the thermal conductivities of three-dimensionally woven fabric composites. Mech Compos Mater. 45(2), 165–174 (2009)
Wang, M., Kang, Q., Pan, N.: Thermal conductivity enhancement of carbon fiber composites. Appl Therm Eng. 29(2–3), 418–421 (2009)
Acknowledgements
The authors express their thanks to the Key project in the Tianjin Municipal Science and Technology support Program (15ZCZDGX00340).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, Y., Song, L., Li, J. et al. Multi-Scale Finite Element Analyses of Thermal Conductivities of Three Dimensional Woven Composites. Appl Compos Mater 24, 1525–1542 (2017). https://doi.org/10.1007/s10443-017-9601-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-017-9601-0