Abstract
This article provides an overview of the connection between the microstructural state and the mechanical response of various bioresorbable polylactide (PLA) devices for medical applications. PLLA is currently the most commonly used material for bioresorbable stents and sutures, and its use is increasing in many other medical applications. The non-linear mechanical response of PLLA, due in part to its low glass transition temperature (T g ≈ 60 °C), is highly sensitive to the molecular weight and molecular orientation field, the degree of crystallinity, and the physical aging time. These microstructural parameters can be tailored for specific applications using different resin formulations and processing conditions. The stress–strain, deformation, and degradation response of a bioresorbable medical device is also strongly dependent on the time history of applied loads and boundary conditions. All of these factors can be incorporated into a suitable constitutive model that captures the multiple physics that are involved in the device response. Currently developed constitutive models already provide powerful computations simulation tools, and more progress in this area is expected to occur in the coming years.
Similar content being viewed by others
References
Agrawal, C. M., K. F. Haas, D. A. Leopold, and H. G. Clark. Evaluation of poly(l-lactic acid) as a material for intravascular polymeric stents. Biomaterials 13(3):176–182, 1992.
Bai, H., H. Huang, Q. Xiu, Q. Zhang, and Q. Fu. Enhancing mechanical performance of polylactide by tailoring crystal morphology and lamellae orientation with the aid of nucleating agent. Polymer 55:6924–6934, 2014.
Bergström, J. S. Mechanics of Solid Polymers: Theory and Computational Modeling. Norwich: William Andrew Publishing, 2015.
Bergström, J. S., and M. C. Boyce. Constitutive modeling of time-dependent and cyclic loading of elastomers and application to soft biological tissues. Mech. Mater. 33:523–530, 2001.
DeJong, L. E. S., T. M. DeBarardino, D. E. Brooks, and K. Judson. In vivo comparison of a metal versus a biodegradable suture anchor. Arthroscopy 20:511–516, 2004.
Delabarde, C., C. J. G. Plummer, P. E. Bourban, and J. A. E. Månson. Accelerated ageing and degradation in poly-l-lactide/hydroxyapatite nanocomposites. Polym. Degrad. Stab. 96:595–607, 2011.
Dreher, M. L., S. Nagaraja, H. Bui, and D. Hong. Characterization of load dependent creep behavior in medically relevant absorbable polymers. J. Mech. Behav. Biomed. Mater. 29:470–479, 2014.
Engels, T. A. P., S. H. M. Söntjens, T. H. Smit, and L. E. Govaert. Time-dependent failure of amorphous polylactides in static loading conditions. J. Mater. Sci. 21:89–97, 2010.
Erne, P., M. Schier, and T. J. Resink. The road to bioabsorbable stents: reaching clinical reality? Cadriovasc. Intervent. Radiol. 29:11–16, 2006.
Eswaran, S. K., J. A. Kelley, J. S. Bergström, and V. L. Giddings. Material modeling of polylactide. In: Simulia Customer Conference, Barcelona, Spain, 2011.
Eyring, H. Viscosity, plasticity, and diffusion as examples of absolute reaction rates. J. Chem. Phys. 4:283–291, 1936.
Garg, S., and P. W. Serruys. Coronary stents, looking forward. JACC 56(10):43–78, 2010.
Gefen, A. Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopaedic screws. Med. Biol. Eng. Compu. 40:311–322, 2002.
Göpferich, A. Mechanisms of polymer degradation and erosion. Biomaterials 14:103–114, 1996.
Grijpma, D., and A. J. Pennings. Co(polymers) of l-lactide, mechanical properties. Macromol. Chem. Phys. 195:1649–1663, 1994.
Hayman, D., C. Bergerson, S. Miller, M. Moreno, and J. E. Moore. The effect of static and dynamic loading on degradation of PLLA stent fibers. J. Biomech. Eng. 136(081006):1–9, 2014.
Henton, D. E., P. Gruber, J. Lunt, and J. Randall. Polylactic acid technology In: Natural Fibers, Biopolymers, and Biocomposites, Boca Raton, PL: Taylor & Francis, 2005, pp. 527–577.
Hermawan, H., D. Dubé, and D. Mantovani. Developments in metallic biodegradable stents. Acta Biomater. 6:1693–1697, 2010.
Imola, M. J., D. D. Hamlar, W. Shao, K. Chowdhury, and S. Tatum. Resorbable plate fixation in pediatric cranofacial surgery. JAMA Facial Plast. Surg. 3(2):79–90, 2001.
J. S. Bergström, Advanced modeling of bioresorbable PLA medical devices. In: ANTEC, Cincinnati, OH, 2013.
Khan, K. A., and T. El-Sayed. A phenomenological constitutive model for the nonlinear viscoelastic responses of biodegradable polymers. Acta Mech. 224:287–305, 2013.
Klompen, E. T. J., T. A. P. Engels, L. E. Govaert, and H. E. H. Meijer. Modeling of the postyield response of glassy polymers: influence of thermomechanical history. Macromolecules 38:6997–7008, 2005.
Klompen, E. T. J., T. A. P. Engels, L. C. A. van Breemen, P. J. G. Schreurs, L. E. Govaert, and H. E. H. Meijer. Quantitative prediction of long-term failure of polycarbonate. Macromolecules 38:7009–7017, 2005.
Knowles, J. K. The finite anti-plane shear field near the tip of a crack for a class of incompressible elastic solids. Int. J. Fract. 13(5):611–639, 1977.
Kolk, A., R. Kohnke, C. H. Saely, and O. Ploder. Are biodegradable osteosyntheses still an option for midface trauma? Longitudinal evaluation of three different PLA-based materials. BioMed Res. Int. Article ID 621481 (in press).
Langer, R. Drug delivery and targeting. Nature 392:5–10, 1998.
Lembeck, B., and N. Wülker. Severe cartilage damage by broken poly-l-lactic acid (PLLA) interference screw after ACL reconstruction. Knee Surg. Sports Traumatol. Arthrosc. 13:283–286, 2005.
Lou, C. W., C. H. Yao, Y. S. Chen, T. C. Hsieh, J. H. Lin, and W. H. Hsing. Manufacturing and properties of PLA absorbable surgical suture. Text. Res. J. 78:958–965, 2008.
Maharana, T., B. Mohanty, and Y. S. Negi. Melt-solid polycondensation of lactic acid and its biodegradability. Prog. Polym. Sci. 34:99–124, 2009.
Marec, P. E., J. C. Ferry, J. C. Quantin, J. C. Bénézet, F. Bonfils, S. Guilbert, and A. Bergeret. Influence of melt processing conditions on poly(lactic acid) degradation: molar mass distribution and crystallization. Polym. Degrad. Stab. 110:353–363, 2014.
Martin, O., and L. Averous. Poly(lactic acid): plasticization and properties of biodegradable multiphase systems. Polymer 42:6209–6219, 2001.
Middleton, J., and A. Tipton. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 21:2335–2346, 2000.
Moravej, M., and D. Mantovani. Biodegradable metals for cardiovascular stent application: interest and new opportunities. Int. J. Mol. Sci. 12:4250–4270, 2011.
Nakafuku, C., and S. Takehisa. Glass transition and mechanical properties of PLLA and PDLLA-PGA copolymer blends. J. Appl. Polym. Sci. 93:2164–2173, 2004.
Nerker, J. A., B. A. Ramsay, and M. Kontopoulou. Dramatic improvements in strain hardening of crystallization kinetics of PLA by simple reactive modification in the melt state. Macromol. Mater. Eng. 299:1419–1424, 2014.
Oca, H. M. D., and I. M. Ward. Structure and mechanical properties of poly(l-lactic acid) crystals and fibers. J. Polym. Sci., Part B: Polym. Phys. 45:892–902, 2007.
Onuma, Y., and P. W. Serruys. Bioresorbable scaffold: the advent of a new era in percutaneous coronary and peripheral revascularization? Circulation 123:779–797, 2011.
Pan, P., Z. Liang, B. Zhu, T. Dong, and Y. Inoue. Roles of physical aging on crystallization kinetics and induction period of poly(l-lactide). Macromolecules 41:8011–8019, 2008.
Pan, P., B. Zhu, and Y. Inoue. Enthalpy relaxation and embrittlement of poly(l-lactide) during physical aging. Macromolecules 40:9664–9671, 2007.
Perego, G., G. D. Cella, and C. Bastioli. Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties. J. Appl. Polym. Sci. 59:37–43, 1996.
Sin, L. T. Polylactic acid: PLA biopolymer technology and applications. Norwich: William Andrew (Plastics Design Library), 2012.
Smit, T. H., T. A. P. Engels, S. H. M. Söntjens, and L. E. Govaert. Time-dependent failure in load-bearing polymers: a potential hazard in structural applications of polylactides. J. Mater. Sci. Mater. Med. 21:871–878, 2010.
Soares, J. S. Constitutive Modeling for Biodegradable Polymer for Application in Endovascular Stents. Ph.D. Dissertation, Texas A&M University, 2008.
Soares, J. S., J. E. Moore, and K. R. Rajogopal. Constitutive framework for biodegradable polymers with application to biodegradable stents. ASAIO J. 54:295–301, 2008.
Soares, J. S., K. R. Rajogopal, and J. E. Moore. Deformation-induced hydrolysis of a degradable polymeric cylindrical annulus. Biomech. Model. Mechanobiol. 9:177–186, 2010.
Söntjens, S. H. M., T. A. P. Engels, T. H. Smit, and L. E. Govaert. Time-dependent failure of amorphous poly-D, l-lactide: influence of molecular weight. J. Mech. Behav. Biomed. Mater. 13:69–77, 2012.
Sturm, S. W., T. A. P. Engels, T. H. Smit, and L. E. Govaert. Premature failure of poly-l/d-lactide bioresorbable spinal cages; Pittfalls in designing in time-dependent materials. In 13th International Conference on Deformation, Yield and Fracture of Polymers, 2006.
Tami, H., K. Igaki, and E. Kyo. Initial and 6-month results of biodegradable poly-l-lactic acid coronary stents in humans. Circulation 102:399–404, 2000.
Tsuji, H., and S. Miyauchi. Poly(l-lactide): VI effects of crystallinity on enzymatic hydrolysis of poly(l-lactide) without free amorphous region. Polym. Degrad. Stability 71:415–424, 2001.
Van Dijk, M., D. C. Tunc, T. H. Smit, P. Hingham, E. H. Burger, and P. I. Wuisman. In vitro and in vivo degradation of bioabsorbable PLLA spinal fusion cages. J. Biomed. Mater. Res. 63(6):752–759, 2002.
PolyUMod software, Veryst Engineering, LLC., Needham, MA, 2015.
Vieira, A. C., J. C. Vieira, J. M. Ferra, F. D. Magalães, R. M. Guides, and A. T. Marques. Mechanical study of PLA-PCL fibers during in vitro degradation. J. Mech. Behav. Biomed. Mater. 4:451–460, 2011.
Wang, L., W. Ma, R. A. Gross, and S. P. McCarthy. Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(1-caprolactone). Polym. Degrad. Stabil. 59:161–168, 1998.
Waris, E., N. Ashammakhi, H. Happonen, T. Raatikainen, O. Kaarela, P. Törmälä, S. Santavirta, and Y. T. Konttinen. Bioabsorbable miniplating verses metallic fixation for metacarpal fractures. Clin. Orthop. Relat. Res. 410:310–319, 2003.
Wiebe, J., H. M. Nef, and C. W. Hamm. Current status of bioresorbable scaffolds in the treatment of coronary artery disease. J. Am. Coll. Cardiol. 64:2541–2551, 2014.
Zaroulis, J. S., and M. C. Boyce. Temperature, strain rate, and strain state dependence of the evolution in mechanical behavior and structure of poly(ethylene terephtalate) with finite stain deformation. Polymer 38(6):1303–1315, 1997.
Zhou, Z., J. Zhou, Q. Yi, L. Liu, Y. Zhao, and H. Nie. Biological evaluation of poly-l-lactic acid composite containing bioactive glass. Polym. Bull. 65:411–423, 2010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Associate Editor Abdul I. Barakat oversaw the review of this article.
Rights and permissions
About this article
Cite this article
Bergström, J.S., Hayman, D. An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications. Ann Biomed Eng 44, 330–340 (2016). https://doi.org/10.1007/s10439-015-1455-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10439-015-1455-8