Abstract
This study focused on the effects of treatments of alkali, mild steam, and chitosan on the surface morphology, fiber texture, and tensile properties of pineapple, ramie, and sansevieria fiber bundles. The fibers were treated with NaOH (2%), mild steam (0.1 MPa), and chitosan solutions (4% and 8%). The properties of these treated fibers were characterized and compared with the untreated fibers. Field emission scanning electron microscopy (FE-SEM) was used to observe the surface morphology of those fibers. X-Ray diffraction (XRD) spectroscopy was used to observe the fiber textures. Tensile properties of the treated and untreated fibers were also recorded. SEM micrographs showed that the surfaces of the NaOH-treated fibers were more damaged than those of the steam-treated fibers. The 4% chitosan solution covered the fiber surface more uniformly than the 8% chitosan solution. The steam-treated fibers had higher values of degree of crystallinity, crystallite orientation factor, and crystallite size than the NaOHtreated fibers. Ramie fiber showed greater mechanical properties than the other fibers. The values of tensile strength, Young’s modulus, and toughness of the steamtreated fibers, which were similar to those of the 4% chitosan-coated fibers, were higher than those for the other treatments.
Article PDF
Similar content being viewed by others
References
Liu XD, Nishi N, Tokura S, Sakairi N (2001) Chitosan coated cotton fiber: preparation and physical properties. Carbohydr Polym 44:233–238
Munawar SS, Umemura K, Kawai S (2006) Characterization of the morphological, physical and mechanical properties of seven nonwood plant fiber bundles. J Wood Sci 53:108–113
Mwaikambo LY, Ansell MP (1999) The effect of chemical treatment on the properties of hemp, sisal, jute and kapok for composite reinforcement. Die Ang Makro Chem 272:108–116
Mohanty AK, Misra M, Drzal LT (2001) Surface modification of natural fibers and performance of the resulting biocomposites: an overview. Compos Interfac 8:313–343
Mwaikambo LY, Ansell MP (2002) Chemical modification of hemp, sisal, jute and kapok fibers by alkalization. J Appl Polym Sci 84:2222–2234
Han G, Umemura K, Zhang M, Honda T, Kawai S (2001) Development of high-performance UF-bonded reed and wheat straw medium-density fiberboard. J Wood Sci 47:350–355
Xu J, Widyorini R, Yamauchi H, Kawai S (2006) Development of binderless fiberboard from kenaf core. J Wood Sci 52:236–243
Umemura K, Inoue A, Kawai S (2003) Development of new natural polymer-based wood adhesives I: dry bond strength and water resistance of konjac glucomannan, chitosan, and their composites. J Wood Sci 49:221–226
Hsieh SH, Huang ZK, Huang ZZ, Tseng ZS (2004) Antimicrobial and physical properties of woolen fabrics cured with citric acid and chitosan. J Appl Polym Sci 94:1999–2007
Dwianto W, Norimoto M, Morooka T, Tanaka F, Inoue M, Liu Y (1998) Radial compression of sugi wood. Holz Roh Werkst 56:403–411
Jayme VG, Knolle H (1964) The empirical X-ray determination of the degree of crystallinity of cellulosic material (in German). Das Papier 18:249–255
Sen RK, Chowdhury SK (1957) The crystalline orientation in different varieties of jute fibers of known strength. Text Res J 27:193–195
Tanaka F (1985) Orientation and texture of cellulose crystallite in Pinus desinflora wood. Doctoral Thesis, Kyoto University
Hindeleh AM, Johnson DJ (1972) Crystallinity and crystallite size measurement in cellulose fibers: 1. ramie and fortisan. Polymer 13:423–430
Gomes A, Goda K, Ohgi J (2004) Effects of alkali treatment to reinforcement on tensile properties of curaua fiber green composites. JSME Int J 47:541–546
Ray PK, Bandyopadhyay SB (1975) Some observations on the concept of the degree of crystallinity in cellulose fibers with reference to moisture effects. J Appl Polym Sci 19:729–733
Chidambareswaran PK (1976) Order in cellulose fibers. J Appl Polym Sci 20:2297–2298
Ray PK, Bag SC, Chakravarty AC (1975) The influence of gum on the crystalline structure in ramie fiber. J Appl Polym Sci 19:999–1004
Isikawa A, Okano T, Sugiyama J (1997) Fine structure and tensile properties of ramie fibers in the crystalline form of cellulose I, II, IIII and IVI. Polymer 38:463–468
Zhou LM, Yeung KW, Yuen CWM, Zhou X (2004) Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4-butanetetra-carboxylic acid. J Appl Polym Sci 91:1857–1864
Saha SC, Ray PK, Pandey SN, Goswani K (1991) IR and X-ray diffraction studies of raw and chemically treated pineapple leaf fiber (PALF). J Appl Polym Sci 42:2767–2772
Hawatson AM, Lund PG, Todd JD (1992) Engineering tables and data. Kluwer, London, p 41
Mwaikambo LY, Ansell MP (2006) Mechanical properties of alkali treated plant fibers and their potential as reinforcement materials. I. Hemp fibres. J Mater Sci 41:2483–2496
Pickering KL, Abdella A, Ji C, McDonald AG, Franich RA (2003) The effect of silane coupling agents on radiata pine fiber for use in thermoplastic matrix composite. Compos Part A Appl Sci 34:915–926
Hornsby PR, Hinrichsen E, Trivedi K (1997) Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibers. Part II. Analysis of composite microstructure and mechanical properties. J Mater Sci 32:1009–1015
Shibata M, Takachiyo K, Ozawa K, Yosomiya R, Takeishi H (2002) Biodegradable polyester composites reinforced with short abaca fiber. J Appl Polym Sci 85:129–138
Baley C (2002) Analysis of the flax fibers tensile behaviour and analysis of the tensile stiffness increase. Compos Part A Appl Sci 33:939–948
Zhang M, Kawai S, Sasaki H (1994) Production and properties of composite fiberboard I. Influence of mixing ratio of jute/wood fiber on the properties of boards. Mokuzai Gakkaishi 40:816–823
Bangyekan C, Aht-ong D, Srikulkit K (2006) Preparation and properties evaluation of chitosan coated cassava starch films. Carbohydr Polym 63:61–71
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Munawar, S.S., Umemura, K., Tanaka, F. et al. Effects of alkali, mild steam, and chitosan treatments on the properties of pineapple, ramie, and sansevieria fiber bundles. J Wood Sci 54, 28–35 (2008). https://doi.org/10.1007/s10086-007-0903-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10086-007-0903-y