Abstract
During the last two decades, we have observed a dramatic increase in the electrification of many technologies. What has enabled this transition to take place was the commercialization of Li-ion batteries in the early nineties. Mobile technologies such as cellular phones, laptops, and medical devices make these batteries crucial for our contemporary lifestyle. Like any other electrochemical cell, the Li-ion batteries are restricted to the thermodynamic limitations of the materials. It might be that the energy density of the most advance Li-ion battery is still too low for demanding technologies such as a full electric vehicle. To really convince future customers to switch from the internal combustion engine, new batteries and chemistry need to be developed. Non-aqueous metal-oxygen batteries—such as lithium–oxygen, sodium–oxygen, magnesium–oxygen, and potassium–oxygen—offer high capacity and high operation voltages. Also, by using suitable polar aprotic solvents, the oxygen reduction process that occurs during discharge can be reversed by applying an external potential during the charge process. Thus, in theory, these batteries could be electrically recharged a number of times. However, there are many scientific and technical challenges that need to be addressed. The current review highlights recent scientific insights related to these promising batteries. Nevertheless, the reader will note that many conclusions are applicable in other kinds of batteries as well.
Similar content being viewed by others
References
Abraham K, Jiang Z (1996) A polymer electrolyte based rechargeable lithium/oxygen battery. J Electrochem Soc 143:1–5
Girishkumar G, McCloskey B, Luntz AC, Swanson S, Wilcke W (2010) Lithium−air battery: promise and challenges. J Phys Chem Lett 1:2193–2203
Kraytsberg A, Ein-Eli Y (2011) Review on li-air batteries—opportunities, limitations and perspective. J Power Sources 196:886–893
Christensen J, Albertus P, Sanchez-Carrera RS, Lohmann T, Kozinsky B, Liedtke R, Ahmed J, Kojic A (2012) A critical review of li∕air batteries. J Electrochem Soc 159:R1–R30
Wang Z-L, Xu D, Xu J-J, Zhang X-B (2014) Oxygen electrocatalysts in metal–air batteries: from aqueous to nonaqueous electrolytes. Chem Soc Rev 43:7746–7786
Capsoni D, Bini M, Ferrari S, Quartarone E, Mustarelli P (2012) Recent advances in the development of Li-air batteries. J Power Sources 220:253–263
Sharon D, Etacheri V, Garsuch A, Afri M, Frimer AA, Aurbach D (2013) On the challenge of electrolyte solutions for Li-air batteries: monitoring oxygen reduction and related reactions in polyether solutions by spectroscopy and EQCM. J Phys Chem Lett 4:127–131
Freunberger SA, Chen Y, Drewett NE, Hardwick LJ, Bardé F, Bruce PG (2011) The lithium-oxygen battery with ether-based electrolytes. Angew Chem Int Ed Engl 50:8609–8613
Sharon D, Hirshberg D, Afri M, Frimer AA, Aurbach D (2017) The importance of solvent selection in Li–O2 cells. Chem Commun 53:3269–3272
Kwabi DG, Batcho TP, Amanchukwu CV, Ortiz-Vitoriano N, Hammond P, Thompson CV, Shao-Horn Y (2014) Chemical instability of dimethyl sulfoxide in lithium–air batteries. J Phys Chem Lett 5:2850–2856
Trahan MJ, Mukerjee S, Plichta EJ, Hendrickson MA, Abraham KM (2012) Studies of li-air cells utilizing dimethyl sulfoxide-based electrolyte. J Electrochem Soc 160:A259–A267
Sharon D, Afri M, Noked M, Garsuch A, Frimer AA, Aurbach D (2013) Oxidation of dimethyl sulfoxide solutions by electrochemical reduction of oxygen. J Phys Chem Lett 4:3115–3119
Sharon D, Hirsberg D, Afri M, Garsuch A, Frimer AA, Aurbach D (2014) Reactivity of amide based solutions in lithium–oxygen cells. J Phys Chem C 118:15207–15213
Ottakam Thotiyl MM, Freunberger SA, Peng Z, Bruce PG (2013) The carbon electrode in nonaqueous Li-O2 cells. J Am Chem Soc 135:494–500
McCloskey BD, Speidel A, Scheffler R, Miller DC, Viswanathan V, Hummelshøj JS, Nørskov JK, Luntz AC (2012) Twin problems of interfacial carbonate formation in nonaqueous li–O 2 batteries. J Phys Chem Lett 3:997–1001
Peng Z, Freunberger SA, Chen Y, Bruce PG (2012) A reversible and higher-rate Li-O2 battery. Science 337:563–566
Ottakam Thotiyl MM, Freunberger SA, Peng Z, Chen Y, Liu Z, Bruce PG (2013) A stable cathode for the aprotic Li-O2 battery. Nat Mater 12:1050–1056
Johnson L, Li C, Liu Z, Chen Y, Freunberger SA, Tarascon J-M, Ashok PC, Praveen BB, Dholakia K, Bruce PG (2014) The role of LiO2 solubility in O2 reduction in aprotic solvents and its consequences for Li–O2 batteries. Nat Chem 6:1091–1099
Schroeder MA, Kumar N, Pearse AJ, Liu C, Lee SB, Rubloff GW, Leung K, Noked M (2015) DMSO–Li2O2 interface in the rechargeable Li–O2 battery cathode: theoretical and experimental perspectives on stability. ACS Appl Mater Interfaces 7:11402–11411
Schwenke KU, Metzger M, Restle T, Piana M, Gasteiger H a. (2015) The influence of water and protons on Li2O2 crystal growth in aprotic Li-O2 cells. J Electrochem Soc 162:A573–A584
Aetukuri NB, McCloskey BD, García JM, Krupp LE, Viswanathan V, Luntz AC (2014) Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li–O2 batteries. Nat Chem 7:50–56
Liu T, Leskes M, Yu W, Moore AJ, Zhou L, Bayley PM, Kim G, Grey CP (2015) Cycling Li-O2 batteries via LiOH formation and decomposition. Science (80- ) 350:530–533
Liu T, Kim G, Carretero-Gonzalez J, Castillo-Martinez E, Grey CP (2016) Response to comment on “cycling Li-O2 batteries via LiOH formation and decomposition.”. Science (80- ) 352:667–667
McCloskey BD, Addison D (2017) A viewpoint on heterogeneous Electrocatalysis and redox mediation in Nonaqueous Li-O2 batteries. ACS Catal 7:772–778
Gunasekara I, Mukerjee S, Plichta EJ, Hendrickson MA, Abraham KM (2015) A study of the influence of lithium salt anions on oxygen reduction reactions in Li-air batteries. J Electrochem Soc 162:A1055–A1066
Burke CM, Pande V, Khetan A, Viswanathan V, McCloskey BD (2015) Enhancing electrochemical intermediate solvation through electrolyte anion selection to increase nonaqueous Li–O2 battery capacity. Proc Natl Acad Sci 112:9293–9298
Sharon D, Hirsberg D, Salama M, Afri M, Frimer AA, Noked M, Kwak W-J, Sun Y-K, Aurbach D (2016) Mechanistic role of Li + dissociation level in aprotic Li–O 2 battery. ACS Appl Mater Interfaces 8:5300–5307
Liu R, Lei Y, Yu W, Wang H, Qin L, Han D, Yang W, Zhou D, He Y, Zhai D, Li B, Kang F (2017) Achieving low overpotential lithium–oxygen batteries by exploiting a new electrolyte based on N, N ′-dimethylpropyleneurea. ACS Energy Lett 2:313–318
Schroeder MA, Pearse AJ, Kozen AC, Chen X, Gregorczyk K, Han X, Cao A, Hu L, Lee SB, Rubloff GW, Noked M (2015) An investigation of the cathode-catalyst-electrolyte interface in aprotic Li-O2 batteries. Chem Mater 27:5305–5313
Oh SH, Nazar LF (2012) Oxide catalysts for rechargeable high-capacity Li-O2 batteries. Adv Energy Mater 2:903–910
Jian Z, Liu P, Li F, He P, Guo X, Chen M, Zhou H (2014) Core-shell-structured CNT@RuO2 composite as a high-performance cathode catalyst for rechargeable Li-O2 batteries. Angew Chemie - Int Ed 53:442–446
Lu Y-C, Xu Z, Gasteiger HA, Chen S, Hamad-Schifferli K, Shao-Horn Y (2010) Platinum-gold nanoparticles: a highly active bifunctional electrocatalyst for rechargeable lithium-air batteries. J Am Chem Soc 132:12170–12171
Sharon D, Hirsberg D, Afri M, Chesneau F, Lavi R, Frimer AA, Sun Y-K, Aurbach D (2015) Catalytic behavior of lithium nitrate in Li-O 2 cells. ACS Appl Mater Interfaces 7:16590–16600
Lim H-D, Lee B, Zheng Y, Hong J, Kim J, Gwon H, Ko Y, Lee M, Cho K, Kang K (2016) Rational design of redox mediators for advanced Li–O2 batteries. Nat Energy 1:16066
Bergner BJ, Schürmann A, Peppler K, Garsuch A, Janek J (2014) TEMPO: a mobile catalyst for rechargeable Li-O 2 batteries. J Am Chem Soc 136:15054–15064
Kwak W-J, Hirshberg D, Sharon D, Afri M, Frimer AA, Jung H-G, Aurbach D, Sun Y-K (2016) Li–O 2 cells with LiBr as an electrolyte and a redox mediator. Energy Environ Sci 9:2334–2345
Chen Y, Freunberger SA, Peng Z, Fontaine O, Bruce PG (2013) Charging a Li-O2 battery using a redox mediator. Nat Chem 5:489–494
Gao X, Chen Y, Johnson L, Bruce PG (2016) Promoting solution phase discharge in Li–O2 batteries containing weakly solvating electrolyte solutions. Nat Mater 15:882–888
Younesi R, Hahlin M, Roberts M, Edström K (2013) The SEI layer formed on lithium metal in the presence of oxygen: a seldom considered component in the development of the Li-O2 battery. J Power Sources 225:40–45
Choi JW, Aurbach D (2016) Promise and reality of post-lithium-ion batteries with high energy densities. Nat Rev Mater 1:16013
Wood KN, Noked M, Dasgupta NP (2017) Lithium metal anodes: toward an improved understanding of coupled morphological, electrochemical, and mechanical behavior. ACS Energy Lett 2:664–672
Assary RS, Lu J, Du P, Luo X, Zhang X, Ren Y, Curtiss LA, Amine K (2013) The effect of oxygen crossover on the anode of a li-O2 battery using an ether-based solvent: insights from experimental and computational studies. ChemSusChem 6:51–55
Uddin J, Bryantsev VS, Giordani V, Walker W, Chase GV, Addison D (2013) Lithium nitrate as regenerable SEI stabilizing agent for rechargeable Li/O2 batteries. J Phys Chem Lett 4:3760–3765
Aleshin GY, Semenenko DA, Belova AI, Zakharchenko TK, Itkis DM, Goodilin EA, Tretyakov YD (2011) Protected anodes for lithium-air batteries. Solid State Ionics 184:62–64
Walker W, Giordani V, Uddin J, Bryantsev VS, Chase GV, Addison D (2013) A rechargeable Li-O2 battery using a lithium nitrate/N,N-dimethylacetamide electrolyte. J Am Chem Soc 135:2076–2079
Sun B, Huang X, Chen S, Zhang J, Wang G (2014) An optimized LiNO3/DMSO electrolyte for high-performance rechargeable Li–O2 batteries. RSC Adv 4:11115–11120
Kazyak E, Wood KN, Dasgupta NP (2015) Improved cycle life and stability of lithium metal anodes through ultrathin atomic layer deposition surface treatments. Chem Mater 27:6457–6462
Noked M, Schroeder MA, Pearse AJ, Rubloff GW, Lee SB (2016) Protocols for evaluating and reporting Li–O 2 cell performance. J Phys Chem Lett 7:211–215
Papp JK, Forster JD, Burke CM, Kim HW, Luntz AC, Shelby RM, Urban JJ, McCloskey BD (2017) Poly(vinylidene fluoride) (PVDF) binder degradation in li–O 2 batteries: a consideration for the characterization of lithium superoxide. J Phys Chem Lett 8:1169–1174
Kwak W-J, Hirshberg D, Sharon D, Shin H-J, Afri M, Park J-B, Garsuch A, Chesneau FF, Frimer AA, Aurbach D, Sun Y-K (2015) Understanding the behavior of Li–oxygen cells containing LiI. J Mater Chem A 3:8855–8864
Burke CM, Black R, Kochetkov IR, Giordani V, Addison D, Nazar LF, McCloskey BD (2016) Implications of 4 e—oxygen reduction via iodide redox mediation in Li–O 2 batteries. ACS Energy Lett 1:747–756
Zhao Q, Lu Y, Zhu Z, Tao Z, Chen J (2015) Rechargeable lithium-iodine batteries with iodine/nanoporous carbon cathode. Nano Lett 15:5982–5987
Lu J, Jung Lee Y, Luo X, Chun Lau K, Asadi M, Wang H-H, Brombosz S, Wen J, Zhai D, Chen Z, Miller DJ, Sub Jeong Y, Park J-B, Zak Fang Z, Kumar B, Salehi-Khojin A, Amine K (2016) A lithium–oxygen battery based on lithium superoxide. Nature 1–7.
Peled E, Golodnitsky D, Mazor H, Goor M, Avshalomov S (2011) Parameter analysis of a practical lithium- and sodium-air electric vehicle battery. J Power Sources 196:6835–6840
Bender CL, Hartmann P, Vračar M, Adelhelm P, Janek J (2014) On the thermodynamics, the role of the carbon cathode, and the cycle life of the sodium superoxide (NaO2) battery. Adv Energy Mater 4:1–10
Kang S, Mo Y, Ong SP, Ceder G (2014) Nanoscale stabilization of sodium oxides: Implications for Na-O2 batteries. Nano Lett 14:1016–1020
Wang B, Zhao N, Wang Y, Zhang W, Lu W, Guo X, Liu J (2017) Electrolyte-controlled discharge product distribution of Na–O 2 batteries: a combined computational and experimental study. Phys Chem Chem Phys 19:2940–2949
Bender CL, Schröder D, Pinedo R, Adelhelm P, Janek J (2016) One- or two-electron transfer? The ambiguous nature of the discharge products in sodium-oxygen batteries. Angew Chemie - Int Ed 55:4640–4649
Zhao N, Li C, Guo X (2014) Long-life Na–O2 batteries with high energy efficiency enabled by electrochemically splitting NaO2 at a low overpotential. Phys Chem Chem Phys 16:15646
Ortiz-Vitoriano N, Batcho TP, Kwabi DG, Han B, Pour N, Yao KPC, Thompson CV, Shao-Horn Y (2015) Rate-dependent nucleation and growth of NaO2 in Na-O2 batteries. J Phys Chem Lett 6:2636–2643
Pinedo R, Weber DA, Bergner B, Schröder D, Adelhelm P, Janek J (2016) Insights into the chemical nature and formation mechanisms of discharge products in Na-O2 batteries by means of operando X-ray diffraction. J Phys Chem C 120:8472–8481
Liu WM, Yin WW, Ding F, Sang L, Fu ZW (2014) NiCo2O4 nanosheets supported on Ni foam for rechargeable nonaqueous sodium-air batteries. Electrochem Commun 45:87–90
Yin W-W, Fu Z-W (2017) A highly efficient bifunctional heterogeneous catalyst for morphological control of discharged products in Na–air batteries. Chem Commun 53:1522–1525
Hartmann P, Bender CL, Vračar M, Dürr AK, Garsuch A, Janek J, Adelhelm P (2012) A rechargeable room-temperature sodium superoxide (NaO2) battery. Nat Mater 12:228–232
Arcelus O, Li C, Rojo T, Carrasco J (2015) Electronic structure of sodium superoxide bulk, (100) surface, and clusters using hybrid density functional: relevance for Na-O2 batteries. J Phys Chem Lett 6:2027–2031
McCloskey BD, Garcia JM, Luntz AC (2014) Chemical and electrochemical differences in nonaqueous li–O 2 and Na–O 2 batteries. J Phys Chem Lett 5:1230–1235
Zhao N, Guo X (2015) Cell chemistry of sodium-oxygen batteries with various nonaqueous electrolytes. J Phys Chem C 119:25319–25326
Sun Q, Yadegari H, Banis MN, Liu J, Xiao B, Li X, Langford C, Li R, Sun X (2015) Toward a sodium-“air” battery: revealing the critical role of humidity. J Phys Chem C 119:13433–13441
Xia C, Black R, Fernandes R, Adams B, Nazar LF (2015) The critical role of phase-transfer catalysis in aprotic sodium oxygen batteries. Nat Chem 7:496–501
Liu T, Kim G, Casford MTL, Grey CP (2016) Mechanistic insights into the challenges of cycling a nonaqueous Na–O 2 battery. J Phys Chem Lett 7:4841–4846
Landa-Medrano I, Pinedo R, Bi X, Ruiz De Larramendi I, Lezama L, Janek J, Amine K, Lu J, Rojo T (2016) New insights into the instability of discharge products in Na-O2 batteries. ACS Appl Mater Interfaces 8:20120–20127
Nichols JE, McCloskey BD (2017) The sudden death phenomena in nonaqueous Na–O 2 batteries. J Phys Chem C 121:85–96
Hartmann P, Heinemann M, Bender CL, Graf K, Baumann RP, Adelhelm P, Heiliger C, Janek J (2015) Discharge and charge reaction paths in sodium-oxygen batteries: does NaO2 form by direct electrochemical growth or by precipitation from solution? J Phys Chem C 119:22778–22786
Lutz L, Yin W, Grimaud A, Alves Dalla Corte D, Tang M, Johnson L, Azaceta E, Sarou-Kanian V, Naylor AJ, Hamad S, Anta JA, Salager E, Tena-Zaera R, Bruce PG, Tarascon J-M (2016) High capacity Na–O 2 batteries: key parameters for solution-mediated discharge. J Phys Chem C 120:20068–20076
Abate II, Thompson LE, Kim HC, Aetukuri NB (2016) Robust NaO2 electrochemistry in aprotic Na-O2 batteries employing ethereal electrolytes with a protic additive. J Phys Chem Lett 7:2164–2169
Seh ZW, Sun J, Sun Y, Cui Y (2015) A highly reversible room-temperature sodium metal anode. ACS Cent Sci 1:449–455
Luo W, Lin C-F, Zhao O, Noked M, Zhang Y, Rubloff GW, Hu L (2017) Ultrathin surface coating enables the stable sodium metal anode. Adv Energy Mater 7:1601526
Wenzel S, Leichtweiss T, Weber DA, Sann J, Zeier WG, Janek J (2016) Interfacial reactivity benchmarking of the sodium ion conductors Na3PS4 and sodium ??-alumina for protected sodium metal anodes and sodium all-solid-state batteries. ACS Appl Mater Interfaces 8:28216–28224
Ren X, Wu Y (2013) A low-overpotential potassium-oxygen battery based on potassium superoxide. J Am Chem Soc 135:2923–2926
Laoire CO, Mukerjee S, Abraham KM, Plichta EJ, Hendrickson M a. (2009) Elucidating the mechanism of oxygen reduction for lithium-air battery applications. J Phys Chem C 113:20127–20134
Xiao N, Ren X, He M, McCulloch WD, Wu Y (2017) Probing mechanisms for inverse correlation between rate performance and capacity in K–O 2 batteries. ACS Appl Mater Interfaces 9:4301–4308
Schwenke KU, Meini S, Wu X, Gasteiger HA, Piana M (2013) Stability of superoxide radicals in glyme solvents for non-aqueous Li-O2 battery electrolytes. Phys Chem Chem Phys 15:11830–11839
Schwenke KU, Herranz J, Gasteiger HA, Piana M (2015) Reactivity of the ionic liquid Pyr14TFSI with superoxide radicals generated from KO2 or by contact of O2 with Li7Ti5O12. J Electrochem Soc 162:A905–A914
Ren X, Lau KC, Yu M, Bi X, Kreidler E, Curtiss LA, Wu Y (2014) Understanding side reactions in K–O 2 batteries for improved cycle life. ACS Appl Mater Interfaces 6:19299–19307
Ren X, He M, Xiao N, McCulloch WD, Wu Y (2017) Greatly enhanced anode stability in K-oxygen batteries with an in situ formed solvent- and oxygen-impermeable protection layer. Adv Energy Mater 7:1601080
Eftekhari A, Jian Z, Ji X (2017) Potassium secondary batteries. ACS Appl Mater Interfaces 9:4404–4419
McCulloch WD, Ren X, Yu M, Huang Z, Wu Y (2015) Potassium-ion oxygen battery based on a high capacity antimony anode. ACS Appl Mater Interfaces 7:26158–26166
Xing Z, Qi Y, Jian Z, Ji X (2017) Polynanocrystalline graphite: a new carbon anode with superior cycling performance for K-ion batteries. ACS Appl Mater Interfaces 9:4343–4351
Muldoon J, Bucur CB, Gregory T (2014) Quest for nonaqueous multivalent secondary batteries: magnesium and beyond. Chem Rev 114:11683–11720
Vardar G, Nelson EG, Smith JG, Naruse J, Hiramatsu H, Bartlett BM, Sleightholme AES, Siegel DJ, Monroe CW (2015) Identifying the discharge product and reaction pathway for a secondary mg/O2 battery. Chem Mater 27:7564–7568
Esch TR, Bredow T (2016) Bulk and surface properties of magnesium peroxide MgO2. Appl Surf Sci 389:1202–1207
Vardar G, Smith JG, Thompson T, Inagaki K, Naruse J, Hiramatsu H, Sleightholme AES, Sakamoto J, Siegel DJ, Monroe CW (2016) Mg/O2 battery based on the magnesium-aluminum chloride complex (MACC) electrolyte. Chem Mater 28:7629–7637
Shiga T, Hase Y, Yagi Y, Takahashi N, Takechi K (2014) Catalytic cycle employing a TEMPO—anion complex to obtain a secondary mg- O2 battery. J Phys Chem Lett 5:1648–1652
Dong Q, Yao X, Luo J, Zhang X, Hwang H, Wang D (2016) Enabling rechargeable non-aqueous Mg–O 2 battery operations with dual redox mediators †. Chem Commun 52:10–13
Shiga T, Hase Y, Kato Y, Inoue M, Takechi K (2013) A rechargeable non-aqueous Mg–O2 battery. Chem Commun 49:9152
Hirshberg D, Sharon D, De La Llave E, Afri M, Frimer AA, Kwak W-J, Sun Y-K, Aurbach D (2017) Feasibility of full (Li-ion)–O 2 cells comprised of hard carbon anodes. ACS Appl Mater Interfaces 9:4352–4361
Hassoun J, Jung HG, Lee DJ, Park JB, Amine K, Sun YK, Scrosati B (2012) A metal-free, lithium-ion oxygen battery: a step forward to safety in lithium-air batteries. Nano Lett 12:5775–5779
Wang H, Rus E, Sakuraba T, Kikuchi J, Kiya Y, Abruña HD (2014) CO2 and O2 evolution at high voltage cathode materials of Li-ion batteries: a differential electrochemical mass spectrometry study. Anal Chem 86:6197–6201
Hy S, Felix F, Rick J, Su W-N, Hwang BJ (2014) Direct in situ observation of Li 2 O evolution on Li-rich high-capacity cathode material, Li[Ni x Li (1–2 x )/3 Mn (2– x )/3 ]O 2 (0 ≤ x ≤0.5). J Am Chem Soc 136:999–1007
Sathiya M, Rousse G, Ramesha K, Laisa CP, Vezin H, Sougrati MT, Doublet M-L, Foix D, Gonbeau D, Walker W, Prakash AS, Ben Hassine M, Dupont L, Tarascon J-M (2013) Reversible anionic redox chemistry in high-capacity layered-oxide electrodes. Nat Mater 12:827–835
Sathiya M, Leriche J-B, Salager E, Gourier D, Tarascon J-M, Vezin H (2015) Electron paramagnetic resonance imaging for real-time monitoring of Li-ion batteries. Nat Commun 6:6276–6282
Lu Y-C, Crumlin EJ, Veith GM, Harding JR, Mutoro E, Baggetto L, Dudney NJ, Liu Z, Shao-Horn Y (2012) In situ ambient pressure X-ray photoelectron spectroscopy studies of lithium-oxygen redox reactions. Sci Rep 2:715
Peng Z, Freunberger SA, Hardwick LJ, Chen Y, Giordani V, Bardé F, Novák P, Graham D, Tarascon J-M, Bruce PG (2011) Oxygen reactions in a non-aqueous Li+ electrolyte. Angew Chem Int Ed Engl 50:6351–6355
Gittleson FS, Ryu W, Taylor AD (2014) Operando observation of the gold–electrolyte Interface in Li–O 2 batteries. ACS Appl Mater Interfaces 6:19017–19025
Mozhzhukhina N, Méndez De Leo LP, Calvo EJ (2013) Infrared spectroscopy studies on stability of dimethyl sulfoxide for application in a Li–air battery. J Phys Chem C 117:18375–18380
Torres WR, Tesio AY, Calvo EJ (2014) Solvent co-deposition during oxygen reduction on Au in DMSO LiPF6. Electrochem Commun 49:38–41
Acknowledgements
A.A.F. thanks the Israel Science Foundation (ISF; Grant No. 1469/13) as well as the Ethel and David Resnick Chair in Active Oxygen Chemistry for their kind and generous support. A partial support for this study was also obtained by the INREP project, financed by the Israeli Committee of High Education. D.S and M.N contributed equally to the review.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sharon, D., Hirshberg, D., Afri, M. et al. Aprotic metal-oxygen batteries: recent findings and insights. J Solid State Electrochem 21, 1861–1878 (2017). https://doi.org/10.1007/s10008-017-3590-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-017-3590-7