Skip to main content
Log in

Control charts to evaluate long-term performance in proficiency tests

  • Practitioner's Report
  • Published:
Accreditation and Quality Assurance Aims and scope Submit manuscript

Abstract

As proficiency tests (PTs) provider, the European Union Reference Laboratory for Chemical Elements in Food of Animal Origin (EURL-CEFAO) yearly organizes exercises on the determination of chemical elements within the area of its mandate. The scheme is addressed to the National Reference Laboratories (NRLs) of the European Union Member States. Each PT is planned giving priority to the matrices and elements for which maximum levels are set in Commission Regulation No. 1881/2006 and following amendments as well as to those mainly considered in National Residues Control Plans. Samples to be distributed are prepared in the Laboratory’s facilities using materials purchased on the market and often adjusting the concentration levels of the analytes around their maximum levels. In the 2006–2011 period, PTs were planned as a long-term programme pursuing the general objective of providing the NRLs with a scheme that can give them the opportunity to check and improve the performance of their analytical methods and to verify the effectiveness of any corrective actions through the repetition of the same matrix. Control charts give participants the possibility of a long-term follow-up of their performance promoting the improvement of Quality Control. To this aim, Shewhart and Cusum control charts for z-scores are prepared according to ISO 13528:2005 and updated after each PT for each laboratory. z-scores are assigned using values of σ pEURL-CEFAO that correspond to the level of performance appropriate to the demand. Cusum charts are also evaluated by EURL-CEFAO in order to identify problems that may cause a bias in the measurement method.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

References

  1. Regulation (EC) No. 882/2004 of the European Parliament and of the Council of 29 April 2004 on official controls performed to ensure the verification of compliance with feed and food law, animal health and animal welfare rules. Off J Eur Union, L 165

  2. Council Directive 96/23/EC of 29 April 1996 on measures to monitor certain substances and residues thereof in live animals and animal products. Off J Eur Union, L 125

  3. ISO/IEC Guide 43–1 (1997) Proficiency testing by interlaboratory comparisons—part 1: development and operation of proficiency testing schemes. International Organization for Standardisation, Geneva

    Google Scholar 

  4. ISO/IEC 17043 (2010) Conformity assessment-general requirements for proficiency testing. International Organization for Standardisation, Geneva

    Google Scholar 

  5. Commission Regulation (EC) No. 1881/2006 of 19 December 2006 setting maximum levels for certain contaminants in foodstuffs. Off J Eur Union, L 364

  6. Thompson M, Ellison SRL, Wood R (2006) International harmonized protocol for the proficiency testing of analytical chemistry laboratories. Pure Appl Chem 78:145–196

    Article  CAS  Google Scholar 

  7. ISO/IEC 17025 (2005) General requirements for the competence of testing and calibration laboratories. International Organization for Standardisation, Geneva

    Google Scholar 

  8. Thompson M (2000) Recent trends in inter-laboratory precision at ppb and sub-ppb concentrations in relation to fitness for purpose criteria in proficiency testing. Analyst 125:385–386

    Article  CAS  Google Scholar 

  9. Commission Regulation (EC) No. 333/2007 of 28 March 2007 laying down the methods of sampling and analysis for the official control of the levels of lead, cadmium, mercury, inorganic tin, 3-MCPD and benzo(a)pyrene in foodstuffs. Off J Eur Union, L 88

  10. Commission Regulation (EU) No. 836/2011 of 19 August 2011 amending Regulation (EC) No. 333/2007 laying down the methods of sampling and analysis for the official control of the levels of lead, cadmium, mercury, inorganic tin, 3-MCPD and benzo(a)pyrene in foodstuffs. Off J Eur Union, L 215

  11. ISO 13528 (2005) Statistical methods for use in proficiency testing by interlaboratory comparisons. International Organization for Standardisation, Geneva

    Google Scholar 

  12. Analytical Methods Committee (2003) The J-chart: a simple plot that combines the capabilities of Shewhart and cusum charts, for use in analytical quality control. AMC technical brief no. 12

  13. M. Thompson (2007) Proficiency testing: assessing z-scores in the long term. AMC technical brief no 16

Download references

Acknowledgments

This work has been produced with the financial support of the SANCO 2005/Food SAFETY/003-Residues Program of the European Commission. The contents of this presentation are the sole responsibility of the authors and can in no way be taken to reflect the views of the European Commission.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Angela Sorbo.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sorbo, A., Colabucci, A. & Ciaralli, L. Control charts to evaluate long-term performance in proficiency tests. Accred Qual Assur 18, 291–298 (2013). https://doi.org/10.1007/s00769-013-0956-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00769-013-0956-0

Keywords

Navigation