Abstract
A process for deep trench filling by BenzoCycloButene (BCB) polymer is explored. Deep trenches with 100-μm depth and different aspect ratios from 1.4 to 20 have been successfully filled by BCB. Besides, chemical mechanical polishing (CMP) of BCB is studied with the main goals of smoothing surface topography of substrate after BCB filling and removing excess BCB coating which may be necessary in some applications. Removal rate for BCB, V RR, of about 0.24 μm/min has been achieved for hard cured BCB films using acid slurry. After CMP, the BCB layer showed a roughness of about 1.36 nm (Rq, measured by atomic force microscopy, AFM).
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig1_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig3_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig4_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig5_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00542-009-0894-2/MediaObjects/542_2009_894_Fig7_HTML.jpg)
Similar content being viewed by others
References
Borst CL, Thakurta D, Gill W, Gutmann R (1999) Chemical-mechanical polishing of low dielectric constant polymers in copper slurries. J Electrochem Soc 146:3409–4315
Dow Chemical Company Processing for CYCLOTENE 4000 Series Photo BCB Resins, February (2005)
Dragomirescu D, Charitat G, Morancho F, Rossel P (1999) In: Proceedings of the international semiconductors conference CAS, Romania, vol 1, pp 67–70
Glenn J, Siekkinen J (2000) A novel vertical deep trench RESURF DMOS (VTR-DMOS). In: Proceedings of the 12th international symposium on power semiconductors and ICs, pp 197–200
Jiang H, Yoo K, Yeh J-L, Li Z, Tien NC (2002) Fabrication of thick silicon dioxide sacrificial and isolation blocks in a silicon substrate. J Micromech Microeng 12:87–95
Jourdain A, De Moor P, Baert K, De Wolf I, Tilmans HAC (2005) Mechanical and electrical characterization of BCB as a bond and seal material for cavities housing (RF-) MEMS devices. J Micromech Microeng 15:S89–S96
Lärmer F, Schilp A (1996) Patent Nos. DE4241045 (Germany, issued 5 December 1992). US 5,501,983 (U.S., issued 26 March 1996)
Lerner R, Eckoldt U, Hoelke A, Nevin A, Stoll G (2005) Optimized deep trench isolation for high voltage smart power process. In: Proceedings of the 17th international symposium on power semiconductors and ICs, pp 1–4
Ma EY, Wagner S (1999) Amorphous silicon transistors on ultrathin steel foil substrates. Appl Phys Lett 74:1–2
Maccagnani P, Angelucci R, Pozzi P, Poggi A, Dori L, Cardinali GC, Negrini P (1998) Thick oxidised porous silicon layer as a thermo-insulating membrane for high-temperature operating thin- and thick-film gas sensors. Sens Actuators B 49:22–29
Mahfoz Kotb H, Théolier H, Morancho F, Isoird K, Dubreuil P, Do Conto T (2008) Feasibility study of a junction termination using deep trench isolation technique for the realization of DT-SJMOSFETs. In: Proceedings of the 20th international symposium on power semiconductors and ICs, Orlando, FL, USA, pp 303–306
Miao J, Sun J, Puech M (2005) Fabrication of thick SiO2 block with dry-released cavity in silicon for RF MEMS. Electron Lett 41:662–663
Mills ME, Townsend P, Castillo D, Martin S, Achen A (1997) Benzocyclobutene (DVS-BCB) polymer as an interlayer dielectric (ILD) material. Microelectron Eng 33:327–334
Modafe A, Ghalichechian N, Powers M, Khbeis M, Ghodssi R (2005) Embedded benzocyclobutene in silicon: an integrated fabrication process for electrical and thermal isolation in MEMS. Microelectron Eng 82:154–167
Neirynck J, Yang G-R, Murarja P, Gutmann R (1996) The addition of surfactant for polymer CMP: effects on polymer surface, removal rate and underlying Cu. Thin Solid Films 290–291:447–452
Ou H, Yang Q, Lei H, Wang Q, Wang Q, Hu X (2000) The fabrication of thick SiO2 layer by anodization. Opt Mater 14:271–275
Qingping W, Zhengfan Z, Kaicheng L, Lin G, Wu X, Zihang W (1998) In: Proceedings of the 5th international conference on solid-state and integrated circuit technology, China, pp 172–175
Seok S, Rolland N, Rolland P-A (2006) Packaging methodology for RF devices using a BCB membrane transfer technique. J Micromech Microeng 16:2384–2388
Strandjord AJ, Rogers WB, Ida Y, DeVellis RR, Shiau S, Moyer ES, Scheck DM, Garrou PE (1997) Photosensitive Benzocyclobutene for stress-buffer and passivation applications (one mask manufacturing process). In: Proceedings of the 47th electronic components and technology conference, pp 1260–1268
Théolier L, Isoird K, Morancho F, Roig J, Mahfoz Kotb H, Brunet M, Dubreuil P (2007) Deep trench MOSFET structures study for a 1200 volts application. In: Proceedings of the European conference on power electronics, Denmark, pp 1–9
Théolier L, Mahfoz Kotb H, Isoird K, Morancho F (2009) A new junction termination technique: the deep trench termination (DT2). In: Proceedings of the 21th international symposium on power semiconductors and ICs, Barcelona, Spain (to appear)
Yang GR, Zhao YP, Neirynck JM, Murarke SP, Gutmann RJ (1997) Chemical-mechanical polishing of parylene N and Benzocyclobutene films. J Electrochem Soc 144:3249–3255
Zhang C, Najafi K (2002) Fabrication of thick silicon dioxide layers using DRIE, oxidation and trench refill. In: The fifteenth IEEE international conference on micro electro mechanical systems, pp 160–163
Acknowledgments
The authors would like to thank Dr Magali Brunet for valuable discussions and encouragement.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mahfoz Kotb, H.E., Isoird, K., Morancho, F. et al. Filling of very deep, wide trenches by BenzoCycloButene polymer. Microsyst Technol 15, 1395–1400 (2009). https://doi.org/10.1007/s00542-009-0894-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-009-0894-2