Abstract.
The bending problem of a simply supported, angle-ply piezoelectric-laminated cylindrical panel in cylindrical bending with weak interfaces is considered. A general spring-layer model is adopted to describe the weakness of imperfect interfaces. An exact analysis is performed via the state-space approach. A new system of physical variables is introduced and a variable substitution technique is employed to derive a state equation with constant coefficients. Numerical results are given to show the effect of weak interfaces.
Similar content being viewed by others
References
Kapuria, S.; Dumir, P.C.; Sengupta, S.: An exact axisymmetric solution for a simply supported piezoelectric cylindrical shell. Arch Appl Mech 67 (1997) 260–273
Dumir, P.C.; Dube, G.P.; Kapuria, S.: Exact piezoelastic solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending. Int J Solids Struct 34 (1997)685–702
Paul, H.S.; Murali, V.M.: Wave propagation in a cylindrical poroelastic bone with cavity. Int J of Eng Sci 30 (1992) 1629–1635
Ahmed, S.M.; Abd-Alla, A.M.: Electromechanical wave propagation in a cylindrical poroelastic bone with cavity. Appl Math Comput 133 (2002) 257–286
Paul, H.S.; Natarajan, K.: Axisymmetric free vibration of piezoelectric finite cylindrical bone. J Acoust Soc Am 96 (1994) 213–220
Ding, H.J.; Xu, R.Q.; Chen W.Q.: Free vibration of transversely isotropic piezoelectric circular cylindrical panels. Int J Mech Sci 44 (2002) 191–206
Cheng, C.Q.; Shen, Y.P.: Stability analysis of piezoelectric circular cylindrical shells. J of Appl Mech 64 (1997) 847–852
Yang, X.M.; Shen Y.P.: Dynamic instability of laminated piezoelectric shell. Int J Solids Struct 38 (2001) 2291–2303
Ootao, Y.; Tanigawa, Y.: Transient piezothermoelasticity for a cylindrical composite panel composed of angle-ply and piezoelectric laminae. Int J Solids Struct 39 (2002) 5737–5752
Ding, H.J.; Wang, H.M.; Hou, P.F.: The transient responses of piezoelectric hollow cylinders for axisymmetric plane strain problems. Int J Solids Struct 40 (2003) 105–123
Xu, K.M.; Noor, A.K.: Three-dimensional analytical solutions for coupled thermoelectroelastic response of multilayered cylindrical shells. AIAA J 34 (1996) 802–812
Kapuria, S.; Sengupta, S.; Dumir, P.C.: Three-dimensional solution for a hybrid cylindrical shell under axisymmetric thermoelectric load. Arch Appl Mech 67 (1997) 320–330
Ding, H.J.; Chen, W.Q.; Guo, Y.M.; Yang, Q.D.: Free vibrations of piezoelectric cylindrical shells filled with compressible fluid. Int J Solids Struct 34 (1997) 2025–2034
Ding, H.J.; Chen, W.Q.: Three dimensional problems of piezoelasticity. Nova Science Publishers,New York 2001
Zeng, Y.P.; Jiang, D.L.: Fabrication and properties of laminated Al2O3/TiC composites. Ceramics Int 27 (2001) 597–602.
Barbero, E.J.; Reddy, J.N.: Modeling of delamination in composite laminates using a layer-wise plate theory. Int J Solids Struct 28 (1991) 373–388
Cheng, Z.Q.; Jemah, A.K.; Williams, F.W.: Theory for multilayered anisotropic plates with weakened interfaces. J Appl Mech 63 (1996) 1019–1026
Librescu, L.; Schmidt, R.: A general linear theory of laminated composite shells featuring interlaminar bonding imperfections. Int J Solids Struct 38 (2001) 3355–3375
Chen, W.Q.; Cai, J.B.; Ye, G.R.: Exact solutions of cross-ply laminates with bonding imperfections. AIAA J 41 (2003) 2244–2250
Chen, W.Q.; Lee, K.Y.: Three-dimensional exact analysis of angle-ply laminates in cylindrical bending with interfacial damage via state-space method. Composite Struct 64 (2004) 275–283
Chen, W.Q.; Wang, Y.F.; Cai, J.B.; Ye, G.R.: Three-dimensional analysis of cross-ply laminated cylindrical panels with weak interfaces. Int J Solids Struct 41 (2004) 2429–2446
Seeley, C.E.; Chattopadhyay, A.: Experimental investigation of composite beams with piezoelectric actuation and debonding. Smart Mater Struct 7 (1998) 502–511
Seeley, C.E.; Chattopadhyay, A.: Modeling of adaptive composites including debonding. Int J Solids Struct 36 (1999) 1823–1843
Sun, D.C.; Tong, L.Y.: Control stability analysis of smart beams with debonded piezoelectric actuator layer. AIAA J 40 (2002) 1852–1859
Icardi, U.; Di Sciuva, M.; Librescu, L.: Dynamic response of adaptive cross-ply cantilevers featuring interlaminar bonding imperfections. AIAA J 38 (2000) 499–506
Fan, H.; Sze, K.Y.: A micro-mechanics model for imperfect interface in dielectric materials. Mech mater 33 (2001) 363–373
Chen, W.Q.; Ding, H.J.; Xu, R.Q.: Three-dimensional static analysis of multi-layered piezoelectric hollow spheres via the state space method. Int J Solids Struct 38 (2001) 4921–4936
Chen, W.Q.; Lu, Y.; Ye, G.R.; Cai, J.B.: 3D electroelastic fields in a functionally graded piezoceramic hollow sphere under mechanical and electric loadings. Arch Appl Mech 72 (2002) 39–51
Jing, H.S.; Tzeng, K.G.: Elasticity solution for laminated anisotropic cylindrical panels in cylindrical bending. Composite Structures 30 (1995) 307–317
Author information
Authors and Affiliations
Corresponding author
Additional information
The work was supported by the National Natural Science Foundation of China (No. 10372088) and by the Korea Institute of Science and Technology Evaluation and Planning.
Rights and permissions
About this article
Cite this article
Chen, W., Lee, K. Benchmark solution of angle-ply piezoelectric-laminated cylindrical panels in cylindrical bending with weak interfaces. Arch Appl Mech 74, 466–476 (2005). https://doi.org/10.1007/s00419-004-0357-2
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00419-004-0357-2