Abstract.
An analytical model is developed to study the influence of the Auger upconversion process on the thermal loading under lasing and nonlasing conditions. With the developed model, Auger upconversion rates can be determined by comparing theoretical calculations with experimental results for the ratio of the thermal loading under lasing and nonlasing conditions. The upconversion rates obtained with the present method are compared with the results measured from the fluorescence decay experiment.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 7 June 1999 / Revised version: 3 August 1999 / Published online: 30 November 1999
Rights and permissions
About this article
Cite this article
Chen, Y., Liao, C., Lan, Y. et al. Determination of the Auger upconversion rate in fiber-coupled diode end-pumped Nd:YAG and Nd:YVO4 crystals. Appl Phys B 70, 487–490 (2000). https://doi.org/10.1007/s003400050850
Issue Date:
DOI: https://doi.org/10.1007/s003400050850