Abstract
The synthesis of polyethylene/clay (PE/clay) nanocomposites by means of in situ polymerization was achieved using the clay/BOM/chloroform/EtOH/TiCl4/TEA catalyst system where butyl octyl magnesium (BOM) and triethyl aluminum (TEA) were a modifier for the clay and cocatalyst, respectively. It was found that the catalyst had high activity in ethylene polymerization. The microstructure of the resulting PE/clay nanocomposites was characterized by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. The examinations evidenced the nanocomposite formation with exfoliated clay in the PE matrix. The thermal properties of the produced nanocomposites were studied by differential scanning calorimetry, oxidation induction time, and thermal gravimetric analysis. Furthermore, the mechanical properties of the nanocomposites were evaluated by the impact and tensile tests. The examinations indicated the improved thermal stability and mechanical properties. Meanwhile, a wide range of molecular weights were produced in the presence of hydrogen.
Similar content being viewed by others
References
Sedlacek B (1986) Polymer composites, 1st edn. Walter de Gruyter, Berlin
Giannelis EP (2001) Polymer-layered silicate nanocomposites: synthesis, properties and applications. Appl Organometal Chem 12:675–680
Fim FC, Guterres JM, Basso NRS, Galland GB (2010) Polyethylene/graphite nanocomposites obtained by in situ polymerization. J Polym Sci Part A: Polym Chem 48:692–698
Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng 28:1–63
Harrats C, Groeninckx G (2008) Features, questions and future challenges in layered silicates clay nanocomposites with semicrystalline polymer matrices. Macromol Rapid Commun 29:14–26
Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641
Baniasadi H, Ramazani A, Javannikkhah S (2010) Investigation of in situ prepared polypropylene/clay nanocomposites properties and comparing to melt blending method. Mater Des 31:76–84
Alexandre M, Dubois P, Sun T, Garces JM, Jerome R (2002) Polyethylene-layered silicate nanocomposites prepared by the polymerization filling technique: synthesis and mechanical properties. Polymer 43:2123–2132
Bikiaris D (2010) Microstructure and properties of polypropylene/carbon nanotube nanocomposites. Materials 3:2884–2946
Mignoni ML, Silva JM, Souza MO, Mauler RS, Souza RF, Gusmao KB (2011) Polyethylene/montmorillonite nanocomposites by in situ polymerization of ethylene with nickle-diimine catalysts. J Appl Polym Sci 122:2159–2165
Cui L, Woo SI (2008) Preparation and characterization of polyethylene (PE)/clay nanocomposites by in situ polymerization with vanadium-based intercalation catalyst. Polym Bull 61:453–460
Cui L, Cho HY, Shin JW, Tare NH, Woo SI (2007) In situ polymerization of olefins with nanoparticle by metallocene catalysis. Macromol Symp 260:49–57
Raka L, Gaceva GB, Lu K, Loos J (2009) Characterization of latex-based isotactic polypropylene/clay nanocomposites. Polymer 50:3739–3746
Huang Y, Yang K, Dong JY (2007) An in situ matrix functionalization approach to structure stability enhancement in polyethylene/montmorillonite nanocomposites prepared by intercalative polymerization. Polymer 48:4005–4014
Shin SYA, Simon LC, Soares JBP, Scholz G (2003) Polyethylene–clay hybrid nanocomposites: in situ polymerization using bifunctional organic modifier. Polymer 44:5317–5321
Hel A, Hu H, Huang Y, Dong JY, Han CC (2004) Isotactic poly(propylene)/monoalkylimidazolium modified montmorillonite nanocomposites. Macromol Rapid Commun 25:2008–2013
Du K, He H, Liu X, Han CC (2007) High-performance exfoliated poly(propylene)/clay nanocomposites by in situ polymerization with a novel Z-N/clay compound catalyst. Macromol Rapid Commun 28:2294–2299
Inoue M (1963) Studies on crystallization of high polymers by differential thermal analysis. J Polym Sci Part A: Gen Papers 1:2697–2709
Salajka Z, Kratochvila J, Hude P, Vecorek P (1993) One-phase supported titanium-based catalysts for polymerization of ethylene. II. Effect of hydrogen. J Polym Sci Part A: Polym Chem 31:1493–1498
Jin YH, Park HJ, Im SS, Kwak SY, Kwak S (2002) Polyethylene/clay nanocomposite by in-situ exfoliation of montmorillonite during Ziegler–Natta polymerization of ethylene. Macromol Rapid Commun 23:135–140
Chadwick JC, Morini G, Balbontin G, Mingozzi I, Albizzati E (1997) Propene polymerization with MgCl2-supported catalysts: effects of using a diether as external donor. Macromol Chem Phys 198:1181–1188
Nikolaeva MI, Mikenas TB, Matsko MA, Echevskaya LG, Zakharov VA (2011) Polyethylene/montmorillonite nanocomposites by in situ polymerization of ethylene with nickle-diimine catalysts. J Appl Polym Sci 122:3092–3101
Chien JCW, Nozaki T (1991) High activity magnesium chloride supported catalysts for olefin polymerization. XXIX. Molecular basis of hydrogen activation of magnesium chloride supported Ziegler–Natta catalysts. J Polym Sci Part A: Polym Chem 29:505–516
Abedi S, Hassanpour N (2006) Preparation of bimodal polypropylene in two-step polymerization. J Appl Polym Sci 101:1456–1462
Vizen EI, Rishina LA, Sosnovskaja LN, Dyachkovsky FS, Dubnikova IL, Ladygina TA (1994) Study of hydrogen effect in propylene polymerization on (with) the MgCl2-supported Ziegler–Natta catalyst—part 2. Effect of CS2 on polymerization centres. Eur Polym J 30:1315–1318
Wei L, Tang T, Huang B (2004) Synthesis and characterization of polyethylene/clay-silica nanocomposites: a montmorillonite/silica hybrid supported catalyst and in situ polymerization. J Polym Sci Part A: Polym Chem 42:941–949
Hwu JM, Jiang GJ (2005) Preparation and characterization of polypropylene–Montmorillonite nanocomposites generated by in situ metallocene catalyst polymerization. J Appl Polym Sci 95:1228–1236
Zhao C, Qin H, Gong F, Feng M, Zhang S, Yang M (2005) Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites. Polym Degrad Stab 87:183–189
Karlsson K, Smith GD, Gedde UW (1992) Molecular structure, morphology, and antioxidant consumption in medium density polyethylene pipes in hot-water applications. Polym Eng Sci 32:649–657
Mueller W, Jakob I (2003) Oxidative resistance of high-density polyethylene geomembranes. Polym Degrad Stab 79:161–168
Wang J, Liu ZY, Guo CY, Chen YJ, Wang D (2001) Preparation of a PE/MT composite by copolymerization of ethylene with in-situ produced ethylene oligomers under a dual functional catalyst system intercalated into MT layer. Macromol Rapid Commun 22:1422–1426
Qin HL, Zhang SM, Zhao CG, Feng M, Yang MS, Shu ZJ, Yang SS (2004) Thermal stability and flammability of polypropylene/montmorillonite composites. Polym Degrad Stab 85:807–813
Zanetti M, Camino G, Reichert P, Mulhaupt R (2001) Thermal behavior of poly(propylene) layered silicate nanocomposites. Macromol Rapid Commun 22:176–180
Selvakumar V, Palanikumar K, Palanivelu K (2010) Studies on mechanical characterization of polypropylene/Na-MMT nanocomposites. J Miner Mater Charact Eng 9:671–681
Kurtz SM (2004) The UHMWPE handbook, 1st edn. Elsevier Academic Press, London, pp 1–10
Cecchin G, Marchetti E, Baruzzi G (2001) On the mechanism of polypropene growth over MgCl2/TiCl4 catalyst systems. Macromol Chem Phys 202:1987–1994
McDaniel MP (1981) Fracturing silica-based catalysts during ethylene polymerization. J Polym Sci Polym Chem Ed 19:1967–1976
Acknowledgments
The authors wish to express their thanks to the Petrochemical Research and Technology Co. of NPC, Iran National Science Foundation (INSF) and Amirkabir University of Technology for their support in carrying out this project. We also appreciate Dr. M. Daftari-Besheli, Dr. S. M. Ghafelehbashi, Mrs. Z. Hasanvand, Mr. S. R. Nokhbeh, Dr. D. Sodbar, Mr. M. Saati, Mr. A. Fatehifar, Mr. D. Jafarifar, Mr. M. Habibelahi, Mr. Abdolghani and Mrs. B. Raesi for their help.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abedi, S., Abdouss, M., Nekoomanesh-Haghighi, M. et al. PE/clay nanocomposites produced via in situ polymerization by highly active clay-supported Ziegler–Natta catalyst. Polym. Bull. 70, 1313–1325 (2013). https://doi.org/10.1007/s00289-012-0856-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-012-0856-1