Skip to main content
Log in

Experimental study on the flow field behind a backward-facing step using a detonation-driven shock tunnel

  • Original Article
  • Published:
Shock Waves Aims and scope Submit manuscript

Abstract

The supersonic combustion RAM jet (SCRAM jet) engine is expected to be used in next-generation space planes and hypersonic airliners. To develop the engine, stabilized combustion in a supersonic flow field must be attained even though the residence time of flow is extremely short. A mixing process for breathed air and fuel injected into the supersonic flow field is therefore one of the most important design problems. Because the flow inside the SCRAM jet engine has high enthalpy, an experimental facility is required to produce the high-enthalpy flow field. In this study, a detonation-driven shock tunnel was built to produce a high-enthalpy flow, and a model SCRAM jet engine equipped with a backward-facing step was installed in the test section of the facility to visualize flow fields using a color schlieren technique and high-speed video camera. The fuel was injected perpendicularly to a Mach 3 flow behind the backward-facing step. The height of the step, the injection distance and injection pressure were varied to investigate the effects of the step on air/fuel mixing characteristics. The results show that the recirculation region increases as the fuel injection pressure increases. For injection behind the backward-facing step, mixing efficiency is much higher than with a flat plate. Also, the injection position has a significant influence on the size of the recirculation region generated behind the backward-facing step. The schlieren photograph and pressure histories measured on the bottom wall of the SCRAM jet engine model show that the fuel was ignited behind the step.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Huber, P.W., Schexnayder, C.J., McClinton, C.R.: Criteria for self-ignition of supersonic hydrogen–air mixtures. NASA TP-1457 (1979)

  2. McClinton, C.R.: Autoignition of hydrogen injected transverse to supersonic airstream. AIAA Paper 79-1239 (1979)

  3. Sato, Y., Sayama, M., Masuya, G., Komuro, T., Kudou, K., Murakami, A., Tani, K., Chinzei, N.: Experimental study on autoignition in a Scramjet combustor. J. Propulsion Power 7, 675–658 (1991); see also Proceedings of the 9th International Symposium on Airbreathing Symposium, Athens, Greece, September 1989, pp. 569–576

    Article  Google Scholar 

  4. Whitehurst, R.B., Krauss, R.H., McDaniel, J.C.: Parametric and time resolved studies of auto-ignition and flame holding in a clean-air supersonic combustor. AIAA Paper 92-3424 (1992)

  5. Tomioka, S., Takahashi, S., Ujiie, Y., Kono, M.: Interaction between mixing and combustion of slot-injected fuel in a supersonic combustor. AIAA Paper 95-2447 (1995)

  6. Tomioka, S., Hiraiwa, T., Sakuranaka, N., Murakami, A., Sato, K., Mitani, T.: Ignition strategy in a model Scramjet. AIAA paper. 96-3240. In: Proceedings of the Thirty-Second AIAA Joint Propulsion Conference, Lake Buena Vista, FL, July (1996)

  7. Tomioka, S., Hiraiwa, T., Mitani, T., Zamma, Y., Shiba, H., Masayu, G.: Auto ignition in a supersonic combustor with perpendicular injection behind backward-facing step. AIAA Paper 97-2889 (1997)

  8. Tomioka, S., Shiba, Y., Masuya, G., Tomioka, S., Hiraiwa, T., Mitani, T.: Testing of a Scramjet engine with a Strut at M8 flight condition. AIAA Paper 98-3134 (1998)

  9. Zamma, Y., Shiba, Y., Masuya, G., Tomioka, S., Hiraiwa, T., Mitani, T.: Similarity parameters of pre-ignition flow fields in a supersonic combustor. AIAA Paper 97-2890 (1997)

  10. Gardner, A.D., Paull, A., McIntyre, T.J.: Upstream porthole injection in a 2-D scramjet model. Shock Waves 11, 369–375 (2002)

    Article  Google Scholar 

  11. Itoh, K., Ueda, S., Tanno, H., Komuro, T., Sato, K.: Hypersonic aerothermodynamic and scramjet research using high-enthalpy shock tunnel. Shock Waves 12, 93–98 (2002)

    Article  Google Scholar 

  12. Stalker, R.J.: A study of the free-piston shock tunnel. AIAA J. 5, 2160–2165 (1967)

    Article  Google Scholar 

  13. Yu, H.-R., Esser, B., Lenartz, M., Grönig, H.: Gaseous detonation driver for a shock tunnel. Shock Waves 2, 245–254 (1992)

    Article  Google Scholar 

  14. Lenartz, M., Wang, B., Grönig, H.: Development of a detonation driver for a shock tunnel. In: Proceedings of the 20th International Symposium on Shock Waves, Pasadena, Vol. I, 1995, pp. 153–158

  15. Stuessy, W.S., Lie, H.-C., Lu, F.K., Wilson, D.R.: Initial operation of a high-pressure detonation-driven shock tube facility. AIAA Paper 97-0666. In: Proceedings of the 35th Aerospace Sciences Meeting/Exhibit, Reno, NV, January (1997)

  16. Lu, F.K., Wilson, D.R., Bakos, R.J., Erdos, J.I.: Recent advances in detonation techniques for high-enthalpy facility. AIAA J. 38, 1676–1684 (2000)

    Article  Google Scholar 

  17. Lu, F.K., Wilson, D.R.: Detonation driver for enhancing shock tube performance. Shock Waves 12, 457–468 (2003)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to T.-H. Kim.

Additional information

Communicated by K. Takayama

PACS 47.40.Ki

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kim, TH., Yoshikawa, M., Obara, T. et al. Experimental study on the flow field behind a backward-facing step using a detonation-driven shock tunnel. Shock Waves 15, 1–12 (2006). https://doi.org/10.1007/s00193-005-0283-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00193-005-0283-4

Keywords

Navigation