This paper presents a model for analysing the reaction forces and moments for machining fixtures with large contact areas, e.g. a mechanical vice. Such fixtures transmit torsional loads in addition to normal and tangential loads and thus differ from fixtures using point or line contacts. The model is developed using a contact mechanics approach where the workpiece is assumed to be elastic in the contact region and the fixture element is treated as rigid. Closed-form contact compliance solutions for normal, tangential, and torsional loads are used to derive the elastic deformation model for each contact. A minimum energy principle is used to solve the multiple contact problem yielding unique predictions of the fixture–workpiece contact forces and moments due to clamping and machining forces. This model is then used to determine the minimum clamping force necessary to keep the workpiece in static equilibrium during machining. An example is given to demonstrate its effectiveness in analysing the clamping performance of a mechanical vice during machining.
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, B., Melkote, S. & Liang, S. Analysis of Reactions and Minimum Clamping Force for Machining Fixtures with Large Contact Areas. Int J Adv Manuf Technol 16, 79–84 (2000). https://doi.org/10.1007/s001700050011
Issue Date:
DOI: https://doi.org/10.1007/s001700050011