Abstract
Managing the new product development (NPD) is a challenging mission, and most researches would argue that design is fundamentally linked to intentional action and it cannot emerge out of complexity. In fact, its complexity is generated by a large number of entities and actors which cooperate simultaneously with an unpredictable way to understand what customers want and then design product with diverse objectives in mind. A slight change in one activity may cause tremors everywhere. Within a dynamic environment and in order to meet concurrently these challenges, several researchers have implemented design for X (DFX) techniques. Regarding the availability of numerous DFX, the decision as to which one to apply remains absent. Hence, the purpose of this paper is to present a comprehensive overview of the most prominent DFX techniques with respect to sustainability dimension as well as the cost ownership and product differentiation strategies. In addition to that, complex product necessitates the consideration of integrated DFX to optimize product life cycle from a more holistic perspective. In this respect, the paper addresses a systematic review from 1980 to 2018 by investigating and discussing the past and current research of each DFX techniques as well as for integrated ones. The key problems and issues that future DFX research should address have been identified and discussed in this paper.
Similar content being viewed by others
References
Khavekar R, Vasudevan H, Deshpande G (2018) Application of Shainin methodology to reduce rejections in spur gear manufacturing. Materialstoday: Proceedings 5(5):12003–12008
Boothroyd G, Dewhurst P (1988) Product design for manufacture and assembly. Manuf Eng 100(4):42–46
Huang GQ, Mak KL (1998) The DFX shell: a generic framework for developing design for X tools. Robot Comput Integr Manuf 13(3):271–280
Porter ME (1998) Competing across locations: Enhancing competitive advantage through a global strategy. In Porter, M. (ed.), On Competition, Harvard Business School: Boston, Massachusetts
Chiu MC, Okudan GE (2010) Evolution of design for X tools applicable to design stages: a literature review. In: International design engineering technical conferences and computers and information in engineering conference. Montreal ASME 2010, pp 171–182
Lehto J, Harkonen J, Haapasalo H, Belt P, Mottonen M, Kuvaja P (2011) Benefits of DfX in requirements engineering. Technol Invest 2(01):27
Radziwill NM, Benton MC (2017) Design for X (DfX) in the Internet of Things (IoT). arXiv preprint arXiv:1707.06208
Bras B, Hammond R (1996) Towards design for remanufacturing—metrics for assessing remanufacturability. In: Proceedings of the 1st International Workshop on Reuse, Eindhoven, The Netherlands, pp 5–22
Subramoniam R, Huisingh D, Chinnam RB (2009) Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs. J Clean Prod 17(13):1163–1174
Hatcher GD, Ijomah WL, Windmill JFC (2011) Design for remanufacture: a literature review and future research needs. J Clean Prod 19(17–18):2004–2014
Kjellén U, Sklet S (1995) Integrating analyses of the risk of occupational accidents into the design process part I: a review of types of acceptance criteria and risk analysis methods. Saf Sci 18(3):215–227
Fadier E, Ciccotelli J (1999) How to integrate safety in design: methods and models. Hum Factors Ergon Manuf Serv Ind 9(4):367–379
Sklet S (2006) Safety barriers: definition, classification, and performance. J Loss Prev Process Ind 19(5):494–506
Hale A, Borys D (2013) Working to rule, or working safely? Part 1: a state of the art review. Saf Sci 55:207–221
De Sousa Queiroz F, de Farias Rodrigues MML, Junior GAC, de Barros Oliveira A, De Oliveira JD, De Almeida ER (2014) Avaliação das condições de saúde bucal de Portadores de Necessidades Especiais. Rev Odontol UNESP 43(6):396–401
Sadeghi L, Dantan JY, Siadat A, Marsot J (2016) Design for human safety in manufacturing systems: applications of design theories, methodologies, tools and techniques. J Eng Des 27(12):844–877
Jawahir IS, Dillon OW (2007) Sustainable Manufacturing Processes: New challenges for developing predictive models and optimization techniques. First International Conference on Sustainable Manufacturing. Montreal, Canada
Howarth G, Hadfield M (2006) A sustainable product design model. Mater Des 27(10):1128–1133
Arnette AN, Brewer BL, Choal T (2014) Design for sustainability (DFS): the intersection of supply chain and environment. J Clean Prod 83:374–390
Mayyas A, Qattawi A, Omar M, Shan D (2012) Design for sustainability in automotive industry: a comprehensive review. Renew Sust Energ Rev 16(4):1845–1862
Tian J, Chen M (2014) Sustainable design for automotive products: dismantling and recycling of end-of-life vehicles. Waste Manag 34(2):458–467
Stylidis D, Shani A, Belhassen Y (2017) Testing an integrated destination image model across residents and tourists. Tour Manag 58:184–195
Newbert SL (2007) Empirical research on the resource-based view of the firm: an assessment and suggestions for future research. Strateg Manag J 28(2):121–146
Everhart TE, Thornley RFM (1960) Wide-band detector for micro-microampere low-energy electron currents. J Sci Instrum 37(7):246
Pech JC, Bonneau G, Fallot J (1973) Purification partielle et proprietes des amylases de la poire. Phytochemistry 12(2):299–305
Ziemke MC, Spann MS (1991) Warning-DONT be half-hearted in your efforts to employ concurrent engineering. Ind Eng 23(2):45–49
Benabdellah AC, Bouhaddou I, Benghabrit A (2019) Towards a more strategic product design method across the product lifecycle: Case of the automotive industry. Research in Engineering Design (To appear)
Lee HL, Billington C (1992) Managing supply chain inventory: pitfalls and opportunities. Sloan Manag Rev 33(3):65
Gollnick CD, Luse RE, Pavek JG, Sojka ML, Cnossen JD, Danielson AD, ..., Young ADUS (2009) Patent No. 7,558,557. Washington, DC: U.S. Patent and Trademark Office
Weber NO (1994) Aircraft design takes off with DFMA. Assembly-Radnor 37(8):26–29
Suh NP (1990) The Principles of Design. Oxford University Press, New York
Tsai TC, Liu SB, Wang I (1999) Disproportionation and transalkylation of alkylbenzenes over zeolite catalysts. Appl Catal A Gen 181(2):355–398
Boothroyd G, Radovanovic P (1989) Estimating the cost of machined components during the conceptual design of a product. CIRP Ann Manuf Technol 38(1):157–160
Dewhurst P, Blum C (1989) Supporting analyses for the economic assessment of diecasting in product design. CIRP Ann Manuf Technol 38(1):161–164
Zenger D, Dewhurst P (1988) Early assessment of tooling costs in the design of sheet metal parts. In: Report 29. Dep. Industrial & Manufacturing Engineering, University of Rhode Island, USA
Yamaguchi S, Knight RT (1991) Age effects on the P300 to novel somatosensory stimuli. Electroencephalogr Clin Neurophysiol 78(4):297–301
Salonitis K (2014) Modular design for increasing assembly automation. CIRP Ann Manuf Technol 63(1):189–192
Benkamoun N, ElMaraghy W, Huyet AL, Kouiss K (2014) Architecture framework for manufacturing system design. Procedia CIRP 17:88–93
Thompson MK, Jespersen IKJ, Kjærgaard T (2018) Design for manufacturing and assembly key performance indicators to support high-speed product development. Procedia CIRP 70(1):114–119
Fazio RH, Towles-Schwen T (1999) The MODE model of attitude-behavior processes. Dual-process theories in. Soc Psychol:97–116
Bukchin J, Masin M (2004) Multi-objective design of team oriented assembly systems. Eur J Oper Res 156(2):326–352
Lin L, Wang Y, Al-Shemmeri T, Ruxton T, Turner S, Zeng S, Huang X (2007) An experimental investigation of a household size trigeneration. Appl Therm Eng 27(2–3):576–585
Wang M, Favi P, Cheng X, Golshan NH, Ziemer KS, Keidar M, Webster TJ (2016) Cold atmospheric plasma (CAP) surface nanomodified 3D printed polylactic acid (PLA) scaffolds for bone regeneration. Acta Biomater 46:256–265
Kenna MA, Stool SE, Mallory SB (1986) Junctional epidermolysis bullosa of the larynx. Pediatrics 78(1):172–174
Fabricius M, Lauritzen M (1996) Laser-Doppler evaluation of rat brain microcirculation: comparison with the [14C]-iodoantipyrine method suggests discordance during cerebral blood flow increases. J Cereb Blood Flow Metab 16(1):156–161
Nee AY, Ong SK, Chryssolouris G, Mourtzis D (2012) Augmented reality applications in design and manufacturing. CIRP Ann Manuf Technol 61(2):657–679
Oh Y, Zhou C, Behdad S (2018) Part decomposition and assembly-based (Re) design for additive manufacturing: a review. Addit Manuf 22:230–242
Gonçalves-Coelho AM, Mourao AJ (2007) Axiomatic design as support for decision-making in a design for manufacturing context: a case study. Int J Prod Econ 109(1–2):81–89
Holzner P, Rauch E, Spena PR, Matt DT (2015) Systematic design of SME manufacturing and assembly systems based on axiomatic design. Procedia CIRP 34(1):81–86
Xiao T, Qi X (2008) Price competition, cost and demand disruptions and coordination of a supply chain with one manufacturer and two competing retailers. Omega 36(5):741–753
Holt R, Barnes C (2010) Towards an integrated approach to “Design for X”: an agenda for decision-based DFX research. Res Eng Des 21(2):123–136
Lehmhus D, Wuest T, Wellsandt S, Bosse S, Kaihara T, Thoben KD, Busse M (2015) Cloud-based automated design and additive manufacturing: a usage data-enabled paradigm shift. Sensors 15(12):32079–32122
Unglert J, Hoekstra S, Jauregui-Becker J, van Houten F (2016) Towards decision-support for reconfigurable manufacturing systems based on computational design synthesis. Procedia CIRP 41:153–158
Matt DT, Rauch E (2017) Designing assembly lines for mass customization production systems. In: Modrak V (ed) Mass customized manufacturing: theoretical concepts and practical approaches, 1st edn Routledge, New York, pp 15–36
Mao Y, Zhang J, Letaief KB (2015) A Lyapunov optimization approach for green cellular networks with hybrid energy supplies. IEEE J Sel Areas Commun 33(12):2463–2477
Boothroyd G, Dewhurst P, Knight W (1994) Product design for manufacture and assembly. Marcel Dekker, New York
Fan Y, Zhao D, Zhang L, Huang S, Liu B (2003) Manufacturing grid: needs, concept, and architecture. In: International conference on grid and cooperative computing. Springer, Berlin, pp 653–656
Lin C, Baines TS, O’Kane J, Link D (1998) A generic methodology that aids the application of system dynamics to manufacturing system modeling. In: Proceedings of the International Conference on Simulation, pp 344–349
Wiesenfeld K, Moss F (1995) Stochastic resonance and the benefits of noise: from ice ages to crayfish and SQUIDs. Nature 373(6509):33
Redmond P, Evans P, Ireson J, Wedell K (1988) Comparing the curriculum development process in special (MLD) schools: a systematic qualitative approach. Eur J Spec Needs Educ 3(3):147–160
Tsui WM, Colombari R, Portmann BC, Bonetti F, Thung SN, Ferrell LD et al (1999) Hepatic angiomyolipoma: a clinicopathologic study of 30 cases and delineation of unusual morphologic variants. Am J Surg Pathol 23(1):34–48
Clatworthy SD (2011) Service Innovation Through Touch-points: Development of an Innovation Toolkit for the First Stages of New Service Development. Intl J Des 5(2):15–28
Yu E, Sangiorgi D (2014) Service Design as an approach to New Service Development: reflections and future studies. In Proceedings of the Service Design and Innovation Conference 2014, pp 194–204
Secomandi F, Snelders D (2011) The object of service design. Des Issues 27(3):20–34
Holmlid S, Evenson S (2007) Prototyping and enacting services: Lessons learned from humancentered methods. In: Proceedings from the 10th Quality in Services Conference, QUIS 2007, vol. 10
Holmlid S (2007) Interaction Design and Service Design: Expanding a Comparison of Design Disciplines. Design Inquiries Linköping, Sweden: Human-Centered Systems, Linköpings Universitet
Martinetz TM, Berkovich SG, Schulten KJ (1993) “Neural-gas” network for vector quantization and its application to time-series prediction. IEEE Trans Neural Netw 4(4):558–569
Fields S, Song OK (1989) A novel genetic system to detect protein–protein interactions. Nature 340(6230):245
Carreira R, Patrício L, Jorge RN, Magee CL (2013) Development of an extended Kansei engineering method to incorporate experience requirements in product–service system design. J Eng Des 24(10):738–764
Kimura M (1980) A simple method for estimating evolutionary rates of base substitutions through comparative studies of nucleotide sequences. J Mol Evol 16(2):111–120
Schotman H, Ludden GDS (2014) User acceptance in a changing context: why some product-service systems do not suffer acceptance problems. J Des Res 12(3):188–203
Rexfelt O, Hiort af Ornäs V (2009) Consumer acceptance of product-service systems: designing for relative advantages and uncertainty reductions. J Manuf Technol Manag 20(5):674–699
Van Den Hoogen F, Khanna D, Fransen J, Johnson SR, Baron M, Tyndall A, Riemekasten G (2013) 2013 classification criteria for systemic sclerosis: an American College of Rheumatology/European league against rheumatism collaborative initiative. Arthritis Rheum 65(11):2737–2747
Aurich JC, Mannweiler C, Schweitzer E (2010) How to design and offer services successfully. CIRP J Manuf Sci Technol 2(3):136–143
Michelini RC, Razzoli RP (2004) Product-service eco-design: knowledge-based infrastructures. J Clean Prod 12(4):415–428
Pena EH, Carvalho LF, Barbon S Jr, Rodrigues JJ, Proença ML Jr (2017) Anomaly detection using the correlational paraconsistent machine with digital signatures of network segment. Inf Sci 420:313–328
Baek JS, Kim S, Pahk Y, Manzini E (2018) A sociotechnical framework for the design of collaborative services. Des Stud 55:54–78
Zheng P, Lin TJ, Chen CH, Xu X (2018) A systematic design approach for service innovation of smart product-service systems. J Clean Prod 201:657–667
Bianchi G (2000) Performance analysis of the IEEE 802.11 distributed coordination function. IEEE J Sel Areas Commun 18(3):535–547
Afshar M, Wang D (2011) Systems thinking for designing sustainable product service systems: a case study using a system dynamics approach. Des Princ Pract 4:259–274
Alexander G, Allison J, Allport PP, Anderson KJ, Arcelli S, Armitage JC, Bahan GA (1991) Measurement of theZ0 line shape parameters and the electroweak couplings of charged leptons. Z Phys C: Part Fields 52(2):175–207
Johansson R, Andersson G, Ebmeier S, Kessler C, Cuijpers (2012) Internet-based psychological treatments for depression. Expert Rev Neurother 12(7):861–870
Baxter Jr JF (2000) U.S. patent no. 6,023,223. Washington, DC: U.S. Patent and Trademark Office
Zhang H, Wang X, You M, Liu C (1999) Water-yield relations and water-use efficiency of winter wheat in the North China plain. Irrig Sci 19(1):37–45
Brown HD, Lee H (1994) Teaching by principles: An interactive approach to language pedagogy (Vol. 1). Prentice Hall Regents, Englewood Cliffs, p 994
Hu LT, Bentler PM (1999) Cutoff criteria for fit indexes in covariance structure analysis: conventional criteria versus new alternatives. Struct Equ Model Multidiscip J 6(1):1–55
Wang X, Xing G, Zhang Y, Lu C, Pless R, Gill C (2003, November) Integrated coverage and connectivity configuration in wireless sensor networks. In Proceedings of the 1st international conference on Embedded networked sensor systems (pp. 28-39). ACM
Sangiorgi D, Junginger S (2015) Emerging issues in service design. Des J 18(2):165–170
Arntzen BC, Brown GG, Harrison TP, Trafton LL (1995) Global supply chain management at digital equipment corporation. Interfaces 25(1):69–93
Sharifi H, Ismail HS, Reid I (2006) Achieving agility in supply chain through simultaneous “design of” and “design for” supply chain. J Manuf Technol Manag 17(8):1078–1098
Jindal A, Sangwan KS (2016) A fuzzy based decision support framework for product recovery process selection in reverse logistics. Int J Serv Oper Manag 25(4):413–439. https://doi.org/10.1504/IJSOM.2016.10000346
Tan KC, Kannan VR, Handfield RB, Ghosh S (1999) Supply chain management: an empirical study of its impact on performance. Int J Oper Prod Manag 19(10):1034–1052
Petersen FT, Meier R, Larsen MN (2003) Testing species richness estimation methods using museum label data on the Danish Asilidae. Biodivers Conserv 12(4):687–701
Droge C, Vickery SK, Jacobs MA (2012) Does supply chain integration mediate the relationships between product/process strategy and service performance? An empirical study. Int J Prod Econ 137(2):250–262
Ginhoux F, Greter M, Leboeuf M, Nandi S, See P et al (2010) Fate mapping analysis reveals that adult microglia derive from primitive macrophages. Science 330:841–845
Brewer W H (1966) Up and Down California in 1860–1864. Yale University Press, New Haven. Available in a third edition. Ed F P Farquhar. University of California Press, Berkeley
Lee HL, Sasser MM (1995) Product universality and design for supply chain management. Prod Plan Control 6(3):270–277
Graves SC, Willems SP (2005) Optimizing the supply chain configuration for new products. Manag Sci 51(8):1165–1180
Sharifi H, Ismail HS, Reid I (2006) Achieving agility in supply chain through simultaneous “design of” and “design for” supply chain. J Manuf Technol Manag 17(8):1078–1098
Smith PB Bond MH (1998) Social Psychology across Cultures (2nd edn), Allyn & Bacon: Boston, MA
Chen W, Kucukyazici B, Verter V, Sáenz MJ (2015) Supply chain design for unlocking the value of remanufacturing under uncertainty. Eur J Oper Res 247(3):804–819
Spengler T, Püchert H, Penkuhn T, Rentz O (1997) Environmental integrated production and recycling management. In: Produktion und umwelt. Springer, Berlin, pp 239–257
Al-Qeisi K, Dennis C, Alamanos E, Jayawardhena C (2014) Website design quality and usage behavior: unified theory of acceptance and use of technology. J Bus Res 67(11):2282–2290
Aras N, Aksen D (2008) Locating collection centers for distance-and incentive-dependent returns. Int J Prod Econ 111(2):316–333
Luthra S, Kumar V, Kumar S, Haleem A (2011) Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique – an Indian perspective. J Ind Eng Manag 4(2):231–257
Bloemhof-Ruwaard JM, Van Wassenhove LN, Gabel HL, Weaver PM (1996) An environmental life cycle optimization model for the European pulp and paper industry. Omega 24(6):615–629
Kannan G, Haq AN, Sasikumar P, Arunachalam S (2008) Analysis and selection of green suppliers using interpretative structural modelling and analytic hierarchy process. Int J Manag Decis Mak 9(2):163–182
Dowlatshahi S (2000) Developing a theory of reverse logistics. Interfaces 30(3):143–155
Wojanowski R, Verter V, Boyaci T (2007) Retail–collection network design under deposit–refund. Comput Oper Res 34(2):324–345
Ferguson N, Browne J (2001) Issues in end-of-life product recovery and reverse logistics. Prod Plan Control 12(5):534–547
Guide VDR Jr (2000) Production planning and control for remanufacturing: industry practice and research needs. J Oper Manag 18(4):467–483
Zhu W, He Y (2017) Green product design in supply chains under competition. Eur J Oper Res 258(1):165–180
Das K (2018) Integrating lean systems in the design of a sustainable supply chain model. Int J Prod Econ 198:177–190
Crow DR (1988) Principles and Applications of Electrochemistry, 3rd ed., Chapman and Hall, London. Dayton, M. A., Brown, J. C., Stutts, K. J., and Wightman, R. M., 1980, Faradaic electrochemistry at microvoltammetric electrodes. Anal Chem 52:946–950
Taguchi G (1993) Taguchi on robust technology development: Bringing quality engineering upstream. New York: ASME Press
Koch AE, Polverini PJ, Kunkel SL, Harlow LA, DiPietro LA, Elner VM et al (1992) Interleukin-8 as a macrophage-derived mediator of angiogenesis. Science 258(5089):1798–1801
Savage B, Saldívar E, Ruggeri ZM (1996) Initiation of platelet adhesion by arrest onto fibrinogen or translocation on von Willebrand factor. Cell 84(2):289–297
Kaymaz I, McMahon CA (2005) A response surface method based on weighted regression for structural reliability analysis. Probab Eng Mech 20(1):11–17
Hubert C, Lebrun P, Houari S, Ziemons E, Rozet E, Hubert P (2014) Improvement of a stability-indicating method by quality-by-design versus quality-by-testing: a case of a learning process. J Pharm Biomed Anal 88:401–409
Mukhopadhyay SK, Setaputra R (2007) A dynamic model for optimal design quality and return policies. Eur J Oper Res 180(3):1144–1154
Khan RA, Mustafa K, Ahson SI (2007) An empirical validation of object oriented design quality metrics. Comput inform sci 19:1–16
Ovaska E, Evesti A, Henttonen K, Palviainen M, Aho P (2010) Knowledge based quality-driven architecture design and evaluation. Inf Softw Technol 52(6):577–601
Strug B (2013) Automatic design quality evaluation using graph similarity measures. Autom Constr 32:187–195
Zairi M (1992) The art of benchmarking: using customer feedback to establish a performance gap. Total Qual Manag 3(2):177–188
Neumann WP, Kolus A, Wells RW (2016) Human factors in production system design and quality performance–a systematic review. IFAC-PapersOnLine 49(12):1721–1724
Das TK, Teng BS (2000) A resource-based theory of strategic alliances. J Manag 26(1):31–61
Swink ML, Calantone R (2004) Design-manufacturing integration as a mediator of antecedents to new product design quality. IEEE Trans Eng Manag 51(4):472–482
Nada OA, ElMaraghy HA, ElMaraghy WH (2006) Quality prediction in manufacturing system design. J Manuf Syst 25(3):153
Freiesleben J (2010) Proposing a new approach to discussing economic effects of design quality. Int J Prod Econ 124(2):348–359
Gu W, Chhajed D, Petruzzi NC, Yalabik B (2015) Quality design and environmental implications of green consumerism in remanufacturing. Int J Prod Econ 162:55–69
Hlatky MA, Boothroyd D, Vittinghoff E, Sharp P, Whooley MA, HERS Research Group (2002) Quality-of-life and depressive symptoms in postmenopausal women after receiving hormone therapy: results from the heart and estrogen/progestin replacement study (HERS) trial. Jama 287(5):591–597
Salmon PM, Read GJ, Stanton NA, Lenné MG (2013) The crash at Kerang: investigating systemic and psychological factors leading to unintentional non-compliance at rail level crossings. Accid Anal Prev 50:1278–1288
Amodei D, Ananthanarayanan S, Anubhai R, Bai J, Battenberg E, Case C, Chen J (2016) Deep speech 2: end-to-end speech recognition in english and mandarin. In International Conference on Machine Learning, pp 173–182
Czinkota MR, Ronkainen IA (1998) International Marketing, 5th edition. The Dryden Press
Citron DK (2014) Hate crimes in cyberspace. Cambridge, MA: Harvard University Press
Rausand M, Utne IB (2009) Product safety–principles and practices in a life cycle perspective. Saf Sci 47(7):939–947
Sadeghi L, Mathieu L, Tricot N, Al Bassit L (2015) Developing a safety indicator to measure the safety level during design for safety. Saf Sci 80:252–263
Ghemraoui R, Mathieu L, Tricot N (2009) Systematic human-safety analysis approach based on axiomatic design principles. In: Fifth International Conference on Axiomatic Design Caparica, pp 1–9
Ghemraoui R, Mathieu L, Tricot N (2009a) Design method for systematic safety integration. CIRP Ann 58(1):161–164
Pahl G, Beitz W (1994) Engineering Design. Springer
Hale AR, Stoop J, Hommels J (1990) Human error models as predictors of accident scenarios for designers in road transport systems. Ergonomics 33(10–11):1377–1387
Tarrants WE (1980) The Measurement of Safety Performance. Garland STPM, New York
Harms-Ringdahl L (2009) Analysis of safety functions and barriers in accidents. Saf Sci 47(3):353–363
Fallah YP, Huang CL, Sengupta R, Krishnan H (2011) Analysis of information dissemination in vehicular ad-hoc networks with application to cooperative vehicle safety systems. IEEE Trans Veh Technol 60(1):233–247
Schein EH (1993a) How can organizations learn faster? The challenge of entering the green room. Sloan Manage. Rev 34:85–92
Jin L, Chen J, Zhang B, Deng W, Zhang L, Zhang H, Wang ZL (2016) Self-powered safety helmet based on hybridized nanogenerator for emergency. ACS Nano 10(8):7874–7881
Marsot J, Claudon L (2004) Design and ergonomics. Methods for integrating ergonomics at hand tool design stage. Int J Occup Saf Ergon 10(1):13–23
Houssin R, Coulibaly A (2011) An approach to solve contradiction problems for the safety integration in innovative design process. Comput Ind 62(4):398–406
Village J, Greig M, Neumann P (2011) Adapting the Failure Modes Effect Analysis (fmea) for Early Detection of Human Factors Concerns. The 42nd Annual Conference of the Association of Canadian Ergonomists, Ontario, London
Sun H, Houssin R, Gardoni M, de Bauvrond F (2013) Integration of user behaviour and product behaviour during the design phase: software for behavioural design approach. Int J Ind Ergon 43(1):100–114
Begg AC, Haustermans K, Hart AA, Dische S, Saunders M, Zackrisson B, Overgaard J (1999) The value of pretreatment cell kinetic parameters as predictors for radiotherapy outcome in head and neck cancer: a multicenter analysis. Radiother Oncol 50(1):13–23
Cicardi M, Aberer W, Banerji A, Bas M, Bernstein JA, Bork K, Riedl MA (2014) Classification, diagnosis, and approach to treatment for angioedema: consensus report from the H ereditary a ngioedema I nternational W orking G roup. Allergy 69(5):602–616
Harjula T, Rapoza B, Knight WA, Boothroyd G (1996) Design for disassembly and the environment. CIRP Ann Manuf Technol 45(1):109–114
Kriwet K, Müller-Goymann CC (1995) Diclofenac release from phospholipid drug systems and permeation through excised human stratum corneum. Int J Pharm 125(2):231–242
Rofstad EK, Gaustad JV, Egeland TA, Mathiesen B, Galappathi K (2010) Tumors exposed to acute cyclic hypoxic stress show enhanced angiogenesis, perfusion and metastatic dissemination. Int J Cancer 127(7):1535–1546
Huisman JA, Hubbard SS, Redman JD, Annan AP (2003) Measuring soil water content with ground penetrating radar. Vadose Zone J 2(4):476–491
Bras B, Hammond R (1996) Towards design for remanufacturing—metrics for assessing remanufacturability. In: Proceedings of the 1st International Workshop on Reuse, Eindhoven, the Netherlands, pp 5–22
Giutini R, Gaudette K (2003) Remanufacturing: the next great opportunity for boosting US productivity. Bus Horiz 46(6):41–48
Ijomah WL, McMahon CA, Hammond GP, Newman ST (2007) Development of design for remanufacturing guidelines to support sustainable manufacturing. Robot Comput Integr Manuf 23(6):712–719
Hatcher GD, Ijomah WL, Windmill JFC (2011) Design for remanufacture: a literature review and future research needs. J Clean Prod 19(17–18):2004–2014
Exterkate FA, Alting AC, Slangen CJ (1991) Specificity of two genetically related cell-envelope proteinases of Lactococcus lactis subsp. cremoris towards αs1-casein-(1–23)-fragment. Biochem J 273(1):135–139
Rose C, Smith MD (2002) MathStatica: mathematical statistics with mathematica. In: Compstat. Physica, Heidelberg, pp 437–442
Hein L, Ishii K, Coughlin SR, Kobilka BK (1994) Intracellular targeting and trafficking of thrombin receptors. A novel mechanism for resensitization of a G protein-coupled receptor. J Biol Chem 269(44):27719–27726
Allenby BR, Fullerton A (1991) Design for environment—a new strategy for environmental management. Pollut Prev Rev 2(1):51–61
Liersch CM, Hepperle M (2011) A distributed toolbox for multidisciplinary preliminary aircraft design. CEAS Aeronaut J 2(1–4):57–68
Fiksel J, Wapman K (1994) How to design for environment and minimize life cycle cost. In: IEEE International Symposium on. Electronics and the Environment, San Francisco, CA, May
Tuerlings JHAM, De France HF, Hamers A, Hordijk R, Van Hemel JO, Hansson K et al (1998) Chromosome studies in 1792 males prior to intra-cytoplasmic sperm injection: the Dutch experience. Eur J Hum Genet 6(3):194
Guenther A, Hewitt CN, Erickson D, Fall R, Geron C, Graedel T, Pierce T (1995) A global model of natural volatile organic compound emissions. J Geophys Res Atmos 100(D5):8873–8892
Cristofari M, Deshmukh A,Wang B (1996) Green quality function deployment. Proc of the 4th international conference on environmentally conscious design and manufacturing, Cleveland, 23–25 July 1996, pp 297–304
Zhang H, Wang X, You M, Liu C (1999) Water-yield relations and water-use efficiency of winter wheat in the North China plain. Irrig Sci 19(1):37–45
Mehta C, Wang B (2001) Green quality function deployment III: a methodology for developing environmentally conscious products. J Des Manuf Autom 1(1–2):1–16
Madu CN, Madu AA (2002) Dimensions of e-quality. Int J Qual Reliab Manag 19(3):246–258
Santos-Reyes DE, Lawlor-Wright T (2001) A design for the environment methodology to support an environmental management system. Integr Manuf Syst 12(5):323–332
Kuo TC, Wu HH, Shieh JI (2009) Integration of environmental considerations in quality function deployment by using fuzzy logic. Expert Syst Appl 36(3):7148–7156
Sakao T (2007) A QFD-centred design methodology for environmentally conscious product design. Int J Prod Res 45(18–19):4143–4162
Bovea MD, Wang B (2007) Redesign methodology for developing environmentally conscious products. Int J Prod Res 45(18–19):4057–4072
Lye SW, Lee SG, Khoo MK (2002) ECoDE–an environmental component design evaluation tool. Eng Comput 18(1):14–23
Veerakamolmal P, Gupta SM (2000) Design for disassembly, reuse and recycling. Environmentally responsible engineering. Butterworth-Heinemann, Oxford, pp 69–82
Qian X, Zhang HC (2009) Design for environment: an environmentally conscious analysis model for modular design. IEEE Trans Electron Packag Manuf 32(3):164–175
Nallagatla SR, Hwang J, Toroney R, Zheng X, Cameron CE, Bevilacqua PC (2007) 5′-triphosphate-dependent activation of PKR by RNAs with short stem loops. Science 318(5855):1455–1458
Younesi M, Roghanian E (2015) A framework for sustainable product design: a hybrid fuzzy approach based on quality function deployment for environment. J Clean Prod 108:385–394
Mitra SK, Kuo Y (2006) Digital signal processing: a computer-based approach (Vol. 2). McGraw-Hill, New York
Li J, Zhang HC, Gonzalez MA, Yu S (2008) A multi-objective fuzzy graph approach for modular formulation considering end-of-life issues. Int J Prod Res 46(14):4011–4033
Blanchini F, Miani S (1999) A new class of universal Lyapunov functions for the control of uncertain linear systems. IEEE Trans Autom Control 44(3):641–647
Knight W, Curtis M (2002) Measuring your ecodesign [end-of-life disassembly]. Manuf Eng 81(2):64–69
Hopkinson N, Hague R, Dickens P (eds) (2006) Rapid manufacturing: an industrial revolution for the digital age. Wiley, New Jersey
Hashim HH, Denan Z (2015) Importance of preserving the natural environment in the design schools in Malaysia. Procedia Soc Behav Sci 170:177–186
Ghazilla RAR, Sakundarini N, Taha Z et al (2015) design for environment and design for disassembly practices in Malaysia: a practitioner’s perspectives. J Clean Prod 108:331–342
Mathieu J, Maynard MT, Rapp T, Gilson L (2008) Team effectiveness 1997-2007: a review of recent advancements and a glimpse into the future. J Manag 34(3):410–476
Park PJ, Tahara K (2008) Quantifying producer and consumer-based eco-efficiencies for the identification of key ecodesign issues. J Clean Prod 16(1):95–104
Mascle C, Zhao HP (2008) Integrating environmental consciousness in product/process development based on life-cycle thinking. Int J Prod Econ 112(1):5–17
Mitelman F, Johansson B, Mertens F (2007) The impact of translocations and gene fusions on cancer causation. Nat Rev Cancer 7(4):233
Boks MP, Russo S, Knegtering R, van den Bosch RJ (2000) The specificity of neurological signs in schizophrenia: a review. Schizophr Res 43(2–3):109–116
Platcheck ER, Schaeffer L, Kindlein W Jr, Cãndido LHA (2008) Methodology of ecodesign for the development of more sustainable electro-electronic equipments. J Clean Prod 16(1):75–86
Liu W, Zhang T, Xue Y, Zhai ZJ, Wang J, Wei Y, Chen Q (2015) State-of-the-art methods for inverse design of an enclosed environment. Build Environ 91:91–100
Rio M, Riel A, Brissaud D (2017) Design to environment: information model characteristics. Procedia CIRP 60:494–499
Tichem M, Storm T (1997) Designer support for product structuring—development of a DFX tool within the design coordination framework. Comput Ind 33(2–3):155–163
Ridker PM, Goldhaber SZ, Danielson E, Rosenberg Y, Eby CS, Deitcher SR, ..., Paulson R (2003) Long-term, low-intensity warfarin therapy for the prevention of recurrent venous thromboembolism. N Engl J Med, 348(15):1425–1434
Rueckel V, Koch A, Feldmann K, Meerkamm H (2005) Process data management in the whole product creation process. In: Proc. of the 9th Int. Conf. on Computer SupportedCooperative Work in Design, vol. 2, pp. 1029–1033
Lindemann, R. K., Newbold, A., Whitecross, K. F., Cluse, L. A., Frew, A. J., Ellis, L., ... ,Pellegrini M (2007). Analysis of the apoptotic and therapeutic activities of histone deacetylase inhibitors by using a mouse model of B cell lymphoma. Proc Natl Acad Sci, 104(19), 8071–8076
Nadadur G, Parkinson MB (2013) The role of anthropometry in designing for sustainability. Ergonomics 56(3):422–439
Keil S, Lasch R (2015) A decision support system for “re-design for X” of production processes: particular focus on high tech industry. In: Logistics Management. Springer, Cham, pp 455–470
Kuo TC, Huang SH, Zhang HC (2001) Design for manufacture and design for ‘X’: concepts, applications, and perspectives. Comput Ind Eng 41(3):241–260
Corbett J (1991) Design for manufacture: strategies, principles, and techniques. Addison Wesley publishing company
Ehrs M. (2012) Is the Automotive Industry Using Design-for-Assembly Anymore?, Ph.D. dissertation, Industrial Management 27- Acta Wasaensia 273- University of Vaasa .Vaasa, Finland
Abramovici M, Breuer MA, Friedman AD (1990) Digital systems testing and testable design, vol 2. Computer science press, New York
Dewhurst P, Abbatiello N (1996) Design for service. In: Design for X. Springer, Dordrecht, pp 298–317
Costa N, Patrício L, Morelli N, Magee CL (2018) Bringing service design to manufacturing companies: integrating PSS and service design approaches. Des Stud 55:112–145
Husić-Mehmedović M, Omeragić I, Batagelj Z, Kolar T (2017) Seeing is not necessarily liking: advancing research on package design with eye-tracking. J Bus Res 80:145–154
Klevås J, Johnsson M, Jönson G (2006) A packaging redesign project at IKEA. In: Nordic case reader in logistics and supply chain management, J. S. Arlbjörn, ed., Odense: University Press of Southern Denmark, pp 139–149
Marsillac E, Roh JJ (2014) Connecting product design, process and supply chain decisions to strengthen global supply chain capabilities. Int J Prod Econ 147:317–329
Negri E, Perotti S, Fumagalli L, Marchet G, Garetti M (2017) Modelling internal logistics systems through ontologies. Comput Ind 88:19–34
Di Gironimo G, Lanzotti A, Vanacore A (2006) Concept design for quality in virtual environment. Comput Graph 30(6):1011–1019
Volker L, Lauche K, Heintz JL, de Jonge H (2008) Deciding about design quality: design perception during a European tendering procedure. Des Stud 29(4):387–409
Sandberg SF, Erikson C, Owen R, Vickery KD, Shimotsu ST, Linzer M et al (2014) Hennepin health: a safety-net accountable care organization for the expanded Medicaid population. Health Aff 33(11):1975–1984
Hundal MS (1998) Electrical Appliances: Safety and Human Considerations. Second Nord Design 98 Seminar on Engineering Design. KTH, Stockholm, pp 299–304
Luo H, Liu Z. (2011) U.S. Patent No. 7,905,639. Washington, DC: U.S. Patent and Trademark Office
Hadikusumo BHW, Rowlinson S (2004) Capturing safety knowledge using design-for-safety-process tool. J Constr Eng Manag 130(2):281–289
Prabhakaran RD, Babu BJC, Agrawal VP (2006) Design for ‘X’-abilities of RTM products-a graph theoretic approach. Concurr Eng 14(2):151–161
Amezquita T, Hammond R, Bras R (1995) Characterizing the Remanufacturability of Engineering Systems. Proc. of 1995 ASME Adv. in Des. Automation Conference, pp 271–278
Shafiq SI, Sanin C, Toro C, Szczerbicki E (2015) Virtual engineering object (VEO): toward experience-based design and manufacturing for industry 4.0. Cybern Syst 46(1–2):35–50
Shafiq SI, Sanin C, Szczerbicki E, Toro C (2016) Virtual engineering factory: creating experience base for industry 4.0. Cybern Syst 47(1–2):32–47
Stock T, Seliger G (2016) Opportunities of sustainable manufacturing in industry 4.0. Procedia Cirp 40:536–541
Beyerer J, Jasperneite J, Sauer O (2015) Industrie 4.0. at-Automatisierungstechnik 63(10):751–752
Vogel-Heuser B, Hess D (2016) Guest editorial industry 4.0–prerequisites and visions. IEEE Trans Autom Sci Eng 13(2):411–413
Zhou K, Liu T, Zhou L (2015, August) Industry 4.0: towards future industrial opportunities and challenges. In: Fuzzy Systems and Knowledge Discovery (FSKD), 2015 12th International Conference on. IEEE, pp 2147–2152
Lasi H, Fettke P, Kemper HG, Feld T, Hoffmann M (2014) Industry 4.0. Bus Inf Syst Eng 6(4):239
Liu A, Stephen CYL (2016) A crowdsourcing design framework for concept generation. CIRP Ann Manuf Technol 65(1):177–180
Lee SH, Yang CS (2017) A real time object recognition and counting system for smart industrial camera sensor. IEEE Sensors J 99
Xia F, Yang LT, Wang L, Vinel A (2012) Internet of things. Int J Commun Syst 25(9):1101–1102
Whitmore A, Agarwal A, Da Xu L (2015) The internet of things—a survey of topics and trends. Inf Syst Front 17(2):261–274
Patel P, Cassou D (2015) Enabling high-level application development for the internet of things. J Syst Softw 103:62–84
Zanella A, Bui N, Castellani A, Vangelista L, Zorzi M (2014) Internet of things for smart cities. IEEE Internet Things J 1(1):22–32
Zhang Y, Zhang G, Wang J, Sun S, Si S, Yang T (2015) Real-time information capturing and integration framework of the internet of manufacturing things. Int J Comput Integr Manuf 28(8):811–822
Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf 28(1):75–86
Armbrust M, Fox A, Griffith R, Joseph AD, Katz R, Konwinski A et al (2010) A view of cloud computing. Commun ACM 53(4):50–58
Kumar V, Sharma D (2017) Cloud computing as a catalyst in STEM education. Int J Inf Commun Technol Educ 13(2):38–51
Qu T, Lei SP, Wang ZZ, Nie DX, Chen X, Huang GQ (2016) IoT-based real-time production logistics synchronization system under smart cloud manufacturing. Int J Adv Manuf Technol 84(1–4):147–164
Zhong RY, Lan S, Xu C, Dai Q, Huang GQ (2016) Visualization of RFID-enabled shopfloor logistics big data in cloud manufacturing. Int J Adv Manuf Technol 84(1–4):5–16
Banyal RK, Jain P, Jain V (2013) Multi-factor authentication framework for cloud computing. In: Fifth International Conference on Computational Intelligence, Modelling and Simulation, pp 105–110
Hajivali M, Fatemi Moghaddam F, Alrashdan MT, Alothmani AZ (2013) Applying an agent-based user authentication and access control model for cloud servers. In: 2013 International Conference on ICT Convergence (ICTC), pp 807–812. IEEE
Moreno-Vozmediano R, Montero RS, Llorente IM (2013) Key challenges in cloud computing: enabling the future internet of services. IEEE Internet Comput 17(4):18–25
Maguluri ST, Srikant R, Ying L (2012) Stochastic models of load balancing and scheduling in cloud computing clusters. In: IEEE (2012) Proceedings of INFOCOM. IEEE, pp 702–710
Sharkh MA, Jammal M, Shami A, Ouda A (2013) Resource allocation in a network-based cloud computing environment: design challenges. IEEE Commun Mag 51(11):46–52
Randles M, Lamb D, Taleb-Bendiab A (2010) A comparative study into distributed load balancing algorithms for cloud computing. In: IEEE Advanced Information Networking and Applications Workshops (WAINA), pp 551–556. WA, Perth
Petcu D (2011, October) Portability and interoperability between clouds: challenges and case study. In: European conference on a service-based internet. Springer, Berlin, pp 62–74
Chaouni Benabdellah A, Benghabrit A, Bouhaddou I Zemmouri, E.M. (2016) Big data for supply chain management: opportunities and challenges. Int J Sci Eng Res 7(11):20–25
Agarwal R, Weill P (2012) The benefits of combining data with empathy. MIT Sloan Manag Rev 54(1):35
Brown B, Chui M, Manyika J (2011) Are you ready for the era of ‘big data’? McKinsey Q 4(1):24–35
Armes T, Refern M (2013) Using “Big Data” and predictive machine learning in aerospace test environments. AUTOTESTCON IEEE: 1–5
Brown H, Tong C, Foyster G (1983) Palladio: an exploratory environment for circuit design. Computer 12:41–56
Makino A, Barkan P, Pfaff R (1989) Design for serviceability. Proceedings of the 1989 ASME Winter Annual Meeting, San Francisco, CA
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Benabdellah, A.C., Bouhaddou, I., Benghabrit, A. et al. A systematic review of design for X techniques from 1980 to 2018: concepts, applications, and perspectives. Int J Adv Manuf Technol 102, 3473–3502 (2019). https://doi.org/10.1007/s00170-019-03418-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-019-03418-6