Abstract
Structural surface texturing is believed to be a promising approach to modify tribological and thermal performances of tooling for sheet-stamping processes. However, a fundamental study on the surface-texturing design and resulting material deformation is currently lacking. In this paper, an advanced analytical buckling model specifically for the utilisation of textured tools at macro-scale, comprising dislocation-driven material model, isotropic yield criteria, bifurcation theory and Donnell-Mushtari-Vlasov (DMV) shell structure theory, was established. The developed analytical buckling model was validated by cylindrical deep-drawing experiments. Further finite element (FE) simulations with the implementation of material model via user-defined subroutine were also used to validate the bucking model for large surface texture designs. Effects of theoretical assumptions, such as yield criterion, boundary condition and test-piece geometry, on the accuracy of model prediction for wrinkling were investigated. It was found that the von Mises yield criterion and hinged boundary condition exhibited more accurate predictions. In addition, the DMV shell theory made this model most representative for large structural texturing designs. Furthermore, the implementation of induced shear strain component has an important effect on precisely predicting the wrinkling occurrence. The advanced analytical models developed in this study combine various classical mechanics, structure stability and material modelling together, which provides a useful tool for tooling engineers to analyse structural designs.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Karbasian H, Tekkaya AE (2010) A review on hot stamping. J Mater Process Technol 210(15):2103–2118. doi:10.1016/j.jmatprotec.2010.07.019
Wang A, Zhong K, El Fakir O, Liu J, Sun C, Wang L-L, Lin J, Dean TA (2016) Springback analysis of AA5754 after hot stamping: experiments and FE modelling. Int J Adv Manuf Technol:1–14. doi:10.1007/s00170-016-9166-3
Mohamed MS, Foster AD, Lin J, Balint DS, Dean TA (2012) Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modelling. Int J Mach Tools Manuf 53(1):27–38. doi:10.1016/j.ijmachtools.2011.07.005
Dong Y, Zheng K, Fernandez J, Li X, Dong H, Lin J (2017) Experimental investigations on hot forming of AA6082 using advanced plasma nitrocarburised and CAPVD WC: C coated tools. J Mater Process Technol 240:190–199. doi:10.1016/j.jmatprotec.2016.09.023
Wang M, Zhang C, Xiao H, Li B (2016) Inverse evaluation of equivalent contact heat transfer coefficient in hot stamping of boron steel. Int J Adv Manuf Technol 87(9):2925–2932. doi:10.1007/s00170-016-8678-1
Bruzzone AAG, Costa HL, Lonardo PM, Lucca DA (2008) Advances in engineered surfaces for functional performance. CIRP Ann Manuf Technol 57(2):750–769. doi:10.1016/j.cirp.2008.09.003
Costa HL, Hutchings IM (2009) Effects of die surface patterning on lubrication in strip drawing. J Mater Process Technol 209(3):1175–1180. doi:10.1016/j.jmatprotec.2008.03.026
Franzen V, Witulski J, Brosius A, Trompeter M, Tekkaya AE (2010) Textured surfaces for deep drawing tools by rolling. Int J Mach Tools Manuf 50(11):969–976. doi:10.1016/j.ijmachtools.2010.08.001
Zheng K, Politis D, Lin J, Dean T (2015) An experimental and numerical investigation of the effect of macro-textured tool surfaces in hot stamping. Int J Mater Form:1–14. doi:10.1007/s12289-015-1273-4
Martins J, Neto D, Alves J, Oliveira M, Menezes L (2016) Numerical modeling of the thermal contact in metal forming processes. The International Journal of Advanced Manufacturing Technology:1–15
Kowsarinia E, Alizadeh Y, Pour HSS (2013) Theoretical and experimental study on the effects of explosive forming parameters on plastic wrinkling of annular plates. Int J Adv Manuf Technol 67(1):877–885. doi:10.1007/s00170-012-4532-2
Zheng K, Politis DJ, Lin J, Dean TA (2016) A study on the buckling behaviour of aluminium alloy sheet in deep drawing with macro-textured blankholder. Int J Mech Sci 110:138–150. doi:10.1016/j.ijmecsci.2016.03.011
Kadkhodayan M, Moayyedian F (2011) Analytical elastic–plastic study on flange wrinkling in deep drawing process. Scientia Iranica 18(2):250–260. doi:10.1016/j.scient.2011.03.020
Senior BW (1956) Flange wrinkling in deep-drawing operations. Journal of the Mechanics and Physics of Solids 4(4):235–246. doi:10.1016/0022-5096(56)90032-1
Yu TX, Johnson W (1982) The buckling of annular plates in relation to the deep-drawing process. Int J Mech Sci 24(3):175–188. doi:10.1016/0020-7403(82)90036-4
Hutchinson J, Neale K (1985) Wrinkling of curved thin sheet metal. Plastic Instability:71–78
Niordson FI (2012) Shell theory. Elsevier Science
Rønning L, Hopperstad OS, Larsen PK (2010) Numerical study of the effects of constitutive models on plastic buckling of plate elements. European Journal of Mechanics - A/Solids 29(4):508–522. doi:10.1016/j.euromechsol.2010.02.001
Hill R (1967) The mathematical theory of plasticity. Clarendon Press
Wang C-T, Kinzel G, Altan T (1994) Wrinkling criterion for an anisotropic shell with compound curvatures in sheet forming. Int J Mech Sci 36(10):945–960. doi:10.1016/0020-7403(94)90056-6
Lin J, Mohamed M, Balint D, Dean T (2014) The development of continuum damage mechanics-based theories for predicting forming limit diagrams for hot stamping applications. International Journal of Damage Mechanics 23(5):684–701
Lin J, Liu Y (2003) A set of unified constitutive equations for modelling microstructure evolution in hot deformation. J Mater Process Technol 143–144:281–285. doi:10.1016/S0924-0136(03)00472-2
Altan T, Tekkaya AE (2012) Sheet metal forming: fundamentals. Asm International
Timoshenko S, Goodier JN (1951) Theory of elasticity, by S. Timoshenko and J. N. Goodier,... 2nd Edition. McGraw-Hill book Company
Chu E, Xu Y (2001) An elastoplastic analysis of flange wrinkling in deep drawing process. Int J Mech Sci 43(6):1421–1440. doi:10.1016/S0020-7403(00)00091-6
Baldwin W, Howald T (1947) Folding in the cupping operation. ASM TRANS Q 38:757–788
Moreira PMGP, Santos T, Tavares SMO, Richter-Trummer V, Vilaça P, de Castro PMST (2009) Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6. Mater Des 30(1):180–187. doi:10.1016/j.matdes.2008.04.042
Neto D, Oliveira M, Dick R, Barros P, Alves J, Menezes L (2015) Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy. International Journal of Material Forming:1–14
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Zheng, K., Lee, J., Politis, D.J. et al. An analytical investigation on the wrinkling of aluminium alloys during stamping using macro-scale structural tooling surfaces. Int J Adv Manuf Technol 92, 481–495 (2017). https://doi.org/10.1007/s00170-017-0121-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0121-8