Abstract
Topology optimisation is an effective approach to design extreme lightweight components. However, most of the resulted optimum lightweight components usually have complex structures which cannot be produced successfully by traditional manufacturing processes. Selective laser melting is one of the additive manufacturing processes. It shows powerful capacity in the manufacturing of metal components with complex structures. Therefore, the combination of topology optimisation and selective laser melting shows a promising prospect for metal components. However, support structures were usually introduced during the selective laser melting manufacturing process, which resulted to some disadvantages, for example, the support structures are generally difficult to remove from the original components because it is difficult to clamping and machining. Therefore, a design method was proposed in this study, named lightweight and support-free design method, the detailed design process and advantages were presented. In the design process, topology optimisation was applied to realise lightweight design, and support-free design process was developed to meet the support-free requirement. Finally, as a case, a cross-beam component was designed using the proposed method, and the final model was produced successfully using selective laser melting process. The case study result verified that the proposed design method is effective to design lightweight and support-free industrial metal components for SLM process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Adam GAO, Zimmer D (2014) Design for additive manufacturing—element transitions and aggregated structures. CIRP J Manuf Sci Technol 7(1):20–28. doi:10.1016/j.cirpj.2013.10.001
Aremu A, Ashcroft I, Hague R, Wildman R, Tuck C (2010) Suitability of SIMP and BESO topology optimization algorithms for additive manufacture. Paper presented at the 21st Annual International Solid Freeform Fabrication Symposium (SFF)–An Additive Manufacturing Conference
Aremu A, Ashcroft I, Wildman R, Hague R, Tuck C, Brackett D (2013) The effects of bidirectional evolutionary structural optimization parameters on an industrial designed component for additive manufacture. Proc Inst Mech Eng B J Eng Manuf 227(6):794–807. doi:10.1177/0954405412463857
Bhavar V, Kattire P, Patil V, Khot S, Gujar K, Singh R (2014) A review on powder bed fusion technology of metal additive manufacturing. Paper presented at the 4th International Conference and Exhibition on Additive Manufacturing Technologies-AM-2014, September 1–2, Bangalore, India
Brackett D, Ashcroft I, Hague R (2011) Topology optimization for additive manufacturing. Paper presented at the 22nd Annual international solid freeform fabrication symposium, 348–362
Calignano F (2014) Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Mater Des 64:203–213. doi:10.1016/j.matdes.2014.07.043
Chahine G, Smith P, Kovacevic R (2010) Application of topology optimization in modern additive manufacturing. Paper presented at the Solid Freeform Fabrication Symposium. Austin, Texas, 606–618
Chang K-H, Tang P-S (2001) Integration of design and manufacturing for structural shape optimization. Adv Eng Softw 32(7):555–567
Kranz J, Herzog D, Emmelmann C (2015) Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. J Laser Appl 27(S1):S14001. doi:10.2351/1.4885235
Leary M, Babaee M, Brandt M, Subic A (2013) Feasible build orientations for self-supporting fused deposition manufacture: a novel approach to space-filling Tesselated geometries. Adv Mater Res 633:148–168. doi:10.4028/www.scientific.net/AMR.633.148
Leary M, Merli L, Torti F, Mazur M, Brandt M (2014) Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures. Mater Des 63:678–690. doi:10.1016/j.matdes.2014.06.015
Lee Y-S, González JA, Lee JH, Kim YI, Park KC, Han S (2016) Structural topology optimization of the transition piece for an offshore wind turbine with jacket foundation. Renew Energy 85:1214–1225. doi:10.1016/j.renene.2015.07.052
Lynch ME, Gu W, El-Wardany T, Hsu A, Viens D, Nardi A, Klecka M (2013) Design and topology/shape structural optimisation for additively manufactured cold sprayed components. Virtual and Physical Prototyping 8(3):213–231. doi:10.1080/17452759.2013.837629
Materialise (2016) 3D Printing Software, http://software.materialise.com/magics. Accessed 25 June 2016
Seabra L M R (2015) Design optimisation for selective laser melting (SLM) and experimental testing of an aircraft component
Strano G, Hao L, Everson RM, Evans KE (2012) A new approach to the design and optimisation of support structures in additive manufacturing. Int J Adv Manuf Technol 66(9–12):1247–1254. doi:10.1007/s00170-012-4403-x
Thomas D (2009) The development of design rules for selective laser melting. PhD Thesis. University of Wales
Tomlin M, Meyer J (2011) Topology optimization of an additive layer manufactured (ALM) aerospace part. Paper presented at the The 7th Altair CAE Technology Conference, Gaydon, UK, 10th May, 1–9
Wang D, Yang Y, Liu R, Xiao D, Sun J (2013) Study on the designing rules and processability of porous structure based on selective laser melting (SLM). J Mater Process Technol 213(10):1734–1742. doi:10.1016/j.jmatprotec.2013.05.001
Xiao D-m, Yang Y-q, Su X-b, Di W, Luo Z-y (2012) Topology optimization of microstructure and selective laser melting fabrication for metallic biomaterial scaffolds. Trans Nonferrous Metals Soc China 22(10):2554–2561
Zegard T, Paulino GH (2015) Bridging topology optimization and additive manufacturing. Struct Multidiscip Optim 53(1):175–192. doi:10.1007/s00158-015-1274-4
Zhang Y, Bernard A, Gupta RK, Harik R (2014) Evaluating the design for additive manufacturing: a process planning perspective. Procedia CIRP 21:144–150. doi:10.1016/j.procir.2014.03.179
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Li, Z., Zhang, D.Z., Dong, P. et al. A lightweight and support-free design method for selective laser melting. Int J Adv Manuf Technol 90, 2943–2953 (2017). https://doi.org/10.1007/s00170-016-9509-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9509-0