Abstract
The enveloping surface is formed of characteristic lines (also called contact line) at all different enveloping moment, a novel CNC (computerized numerical control) machining method based on enveloping characteristic for enveloping surface is proposed in this study. In the proposed method, the characteristic line is the machining unit, the CNC machining is driven by the characteristics lines, the CNC machining tool path distribution along the characteristics lines rather than the traditional CNC machining tool path such as contour layered,etc. In addition, the envelope characteristic automatic recognition algorithm and kinematics model of CNC machining are proposed to achieve the CNC machining based on enveloping characteristic. Finally, the proposed CNC machining method and traditional CNC machining method for single-enveloping surface and double-enveloping surface are conducted as, for instance, the machining experiment results confirm that the proposed methodology enables the machining precision and efficiency to be successfully improved. Hence, the novel CNC machining method proposed in this study is an effective technology to further improve the machining precision and efficiency of enveloping surface.
Similar content being viewed by others
References
Hsieh JF (2014) Design and analysis of indexing cam mechanism with parallel axes. Mech Mach Theory 81:155–165
Chang ZY, Xu CM, Pan TQ, Wang L, Zhang XC (2009) A general framework for geometry design of indexing cam mechanism. Mech Mach Theory 44(11):2079–2084
Lu H, Liu Z, Wang SJ (2014) Digitization modeling and CNC machining for enveloping surface parts. Int J Adv Manuf Technol 73(1–4):209–227
Chryssolouris G (2009) Digital manufacturing: history, perspectives, and outlook. Proc Ins Mech Eng, Part B: J Eng Manuf 223(5):451–462
Berbinschi S, Teodor V, Oancea N (2012) 3D graphical method for profiling tools that generate helical surface. Int J Adv Manuf Technol 60(5–8):505–512
Berbinschi S, Teodor V, Oancea N (2013) 3D graphical method for profiling gear hob tools. Int J Adv Manuf Technol 64(1–4):291–304
Berbinschi S, Teodor V, Oancea N (2012) A study on helical surface generated by the primary peripheral surfaces of ring tool. Int J Adv Manuf Technol 61(1–4):15–24
Litvin FL, Gonzalez-Perez L, Yukishima K, Fuentes A, Hayasaka K (2007) Design simulation of meshing and contact stresses for an improved worm gear drive. Mech Mach Theor 42(8):940–959
Hiltcher Y, Guingand M, deVaujany JP (2007) Load sharing of worm gear with a plastic wheel. J Mech Des 129(1):23–30
Chen CB, Wang FS, Chang PC (2006) A precision design and NC manufacturing model for concave-arc ball-end cutters. Int J Adv Manuf Technol 31(3–4):283–296
Lai HY (2002) A high precision surface grinding model for general ball-end milling cutters. Int J Adv Manuf Technol 19(6):393–402
Can A, Unuvar A (2010) A novel iso-scallop tool-path generation for efficient five-axis machining of free-form surfaces. Int J Adv Manuf Technol 51(9–12):1083–1098
Desai KA, Agarwal PK, Rao PVM (2009) Process geometry modeling with cutter runout for milling of curved surfaces. Int J Mach Tool Manuf 49(12–13):1015–1028
Kim HC (2010) Tool path generation for contour parallel milling with incomplete mesh model. Int J Adv Manuf Technol 48(5–8):443–454
Sun C, Wang YH, Huang ND (2015) A new plunge milling tool path generation method for radial depth control using medial axis transform. Int J Adv Manuf Technol 76:1575–1582
Lopes LGD, Gomes JHD, de Paiva AP, Barca LF, Ferreira JR, Balestrassi PP (2013) A multivariate surface roughness modeling and optimization under conditions of uncertainty. Measurement 46(8):2555–2568
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Liu, Z., Lu, H., Yu, G. et al. A novel CNC machining method for enveloping surface. Int J Adv Manuf Technol 85, 779–790 (2016). https://doi.org/10.1007/s00170-015-7982-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7982-5