Abstract
Advanced high-strength steels have been extensively used in automobile construction, although a more complete understanding of their weld microstructure and mechanical behavior is needed. This work aims to contribute to the understanding of these basic features as well as propose the fiber laser processing conditions. Similar and dissimilar welds of dual-phase or transformation-induced plasticity (TRIP) steels present similarities in terms of microstructure features with the presence of martensite, proeutectoid ferrite, and bainite in the fusion zone and in the heat-affected zone. However, the more important microconstituent is bainite under regular and coalesced morphologies. The tensile behavior could be considered acceptable as most of the welded coupons broke in the base material and far from the weld. Fatigue curves presented a limit at approximately 350 MPa for dual-phase steels and 450 MPa for the TRIP steel.
Similar content being viewed by others
References
Auto/Steel Partnership Joining Project (2007) Advanced high strength steel (AHSS) weld performance study for autobody structural components. A/SP Joining Technologies Committee Report, p. 77
Ribolla A, Damoulis GL, Batalha GF (2005) The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white. J Mater Process Technol 164–165:1120–1127
Keeler S, Kimchi M (2014) Advanced high-strength steels application guidelines, version 5.0. World Auto Steel Report. p. 276
Farabi N, Chen DL, Li J, Zhou Y, Dong SJ (2010) Microstructure and mechanical properties of laser welded DP600 steel joints. Mater Sci Eng A 527:1215–1222
Ahmed EAA (2011) Laser welding of advanced high strength steels. PhD Thesis, Aachener Berichte Fügetechnik
Avramovic-Cingara G, Ososkov Y, Jain MK, Wilkinson DS (2009) Effect of martensite distribution on damage behaviour in DP600 dual phase steels. Mater Sci Eng A 516:7–16
Bhadeshia HKDH (2001) Bainite in steels, 2nd edition. Institute of Materials, London. ISBN 1 86125 112 2
Lis AK, Gajda B (2006) Modelling of the DP and TRIP microstructure in the CMnAlSi automotive steel. J Achiev Mater Manuf Eng 15:127–134
Tao W, Yang Z, Chen Y, Li L, Jiang Z, Zhang Y (2013) Double-sided fiber laser beam welding process of T-joints for aluminum aircraft fuselage panels: filler wire melting behavior, process stability, and their effects on porosity defects. Opt Laser Technol 52:1–9
Andersson JO, Helander T, Höglund L, Shi PF, Sundman B (2002) Thermo-Calc and DICTRA, computational tools for materials science. Calphad 26:273–312
ESI-Group (2015) Welding & assembly. https://www.esi-group.com/software-services/virtual-manufacturing/welding-assembly. Accessed 30 May 2015
ASTM (2015) ASTM E8/E8M-13a Standard test methods for tension testing of metallic materials. http://www.astm.org/Standards/E8.htm. Accessed 30 May 2015
ASTM (2015) ASTM E466:1996 standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. http://www.astm.org/Standards/E466.htm. Accessed 30 May 2015
Vermeulen WG, Morris PF, Weijer AD, Van der Zwaag S (1996) Prediction of martensite start temperature using artificial neural networks. Ironmak Steelmak 23:433–437
Fielding L (2013) The bainite controversy. Mater Sci Technol 9:383–399
Steven W, Haynes AG (1956) Temperature of formation of martensite and bainite in low-allot steel. JISI 183:349–359
Bhadeshia HKDH (2001) Bainite in steels: transformation, microstructure and properties. IOM Communications Ltd., London
Pak JH, Bhadeshia HKDH, Karlsson L, Keehan E (2008) Coalesced bainite by isothermal transformation of reheated weld metal. Science and Technology of Welding and Joining 13:593–597
Westerbaan D (2013) Fiber laser welding of advanced high strength steels. Thesis (PhD). University of Waterloo.
Farabi N, Chen DL, Zhou Y (2011) Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints. J Alloys Compd 509:982–989
Munier R, Doudard C, Calloch S, Weber B (2014) Determination of high cycle fatigue properties of a wide range of steel sheet grades from self-heating measurements. Int J Fatigue 63:46–61
Hu G, Zhu P, Meng J (2010) Fatigue properties of transformation-induced plasticity and dual-phase steels for auto-body lightweight: experiment, modeling and application. Mat Des 31:2884–2890
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Correard, G.C.C., Miranda, G.P. & Lima, M.S.F. Development of laser beam welding of advanced high-strength steels. Int J Adv Manuf Technol 83, 1967–1977 (2016). https://doi.org/10.1007/s00170-015-7701-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7701-2