Abstract
A general set of flow laws and associated variational formulations are constructed for small-deformation rate-independent problems in strain-gradient plasticity. The framework is based on the thermodynamically consistent theory due to Gurtin and Anand (J Mech Phys Solids 53:1624–1649, 2005), and includes as variables a set of microstresses which have both energetic and dissipative components. The flow law is of associative type. It is expressed as a normality law with respect to a convex but otherwise arbitrary yield function, or equivalently in terms of the corresponding dissipation function. Two cases studied are, first, an extension of the classical Hill-Mises or J 2 flow law and second, a form written as a linear sum of the magnitudes of the plastic strain and strain gradient. This latter form is motivated by work of Evans and Hutchinson (Acta Mater 57:1675–1688, 2009) and Nix and Gao (J Mech Phys Solids 46:411–425, 1998), who show that it leads to superior correspondence with experimental results, at least for particular classes of problems. The corresponding yield function is obtained by a duality argument. The variational problem is based on the flow rule expressed in terms of the dissipation function, and the problem is formulated as a variational inequality in the displacement, plastic strain, and hardening parameter. Dissipative components of the microstresses, which are indeterminate, are absent from the formulation. Existence and uniqueness of solutions are investigated for the generalized Hill-Mises and linear-sum dissipation functions, and for various combinations of defect energy. The conditions for well-posedness of the problem depend critically on the choice of dissipation function, and on the presence or otherwise of a defect energy in the plastic strain or plastic strain gradient, and of internal-variable hardening.
Similar content being viewed by others
References
Aifantis E.C.: On the microstructural origin of certain inelastic models. J. Eng. Mater. Technol. 106, 326–330 (1984)
Fleck N.A., Hutchinson J.W.: Strain gradient plasticity. Adv. Appl. Mech. 33, 295–361 (1997)
Fleck N.A., Hutchinson J.W.: A reformulation of strain gradient plasticity. J. Mech. Phys. Solids 49, 2245–2271 (2001)
Gudmundson P.: A unified treatment of strain gradient plasticity. J. Mech. Phys. Solids 52, 1379–1406 (2004)
Gurtin M.E., Anand L.: A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: small deformations. J. Mech. Phys. Solids 53, 1624–1649 (2005)
Nix W.D., Gao H.: Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411–425 (1998)
Voyiadjis G.Z., Deliktas B.: Mechanics of strain gradient plasticity with particular reference to decomposition of the state variables into energetic and dissipative components. Int. J. Eng. Sci. 47, 1405–1423 (2009)
Anand L., Gurtin M.E., Lele S.P., Gething C.: A one-dimensional theory of strain-gradient plasticity: Formulation, analysis, numerical results. J. Mech. Phys. Solids 53, 1789–1826 (2005)
Fleck N.A., Willis J.R.: A mathematical basis for strain-gradient plasticity—Part I: scalar plastic multiplier. J. Mech. Phys. Solids 57, 161–177 (2009)
Fleck N.A., Willis J.R.: A mathematical basis for strain-gradient plasticity—Part II: tensorial plastic multiplier. J. Mech. Phys. Solids 57, 1045–1057 (2009)
Evans A.G., Hutchinson J.W.: A critical assessment of theories of strain gradient plasticity. Acta Mater. 57, 1675–1688 (2009)
Mühlhaus H.B., Aifantis E.: A variational principle for gradient plasticity. Int. J. Solids Struct. 28, 845–857 (1991)
Djoko J.K., Ebobisse F., McBride A.T., Reddy B.D.: A discontinuous Galerkin formulation for classical and gradient plasticity. Part 1: formulation and analysis. Comput. Methods Appl. Mech. Eng. 196, 3881–3897 (2007)
Djoko J.K., Ebobisse F., McBride A.T., Reddy B.D.: A discontinuous Galerkin formulation for classical and gradient plasticity. Part 2: algorithms and numerical analysis. Comput. Methods Appl. Mech. Eng. 197, 1–21 (2007)
Reddy B.D., Ebobisse F., McBride A.T.: Well-posedness of a model of strain gradient plasticity for plastically irrotational materials. Int. J. Plast. 24, 55–73 (2008)
Gurtin M.E., Reddy B.D.: Alternative formulations of isotropic hardening for Mises materials, and associated variational inequalities. Cont. Mech. Thermodyn. 21, 237–250 (2009)
Han W., Reddy B.D.: Plasticity: Mathematical Theory and Numerical Analysis. Springer, New York (1999)
Bardella L.: Some remarks on the strain gradient crystal plasticity, with particular reference to the material length sclaes involved. Int. J. Plast. 23, 296–322 (2006)
Niordson C.F., Hutchinson J.W.: Basic strain gradient plasticity theories with application to constrained film deformation. J. Mech. Mater. Struct. 6, 395–416 (2011)
Hill R.: Constitutive dual potentials in classical plasticity. J. Mech. Phys. Solids 35, 23–33 (1987)
Gurtin M.E., Anand L.: Thermodynamics applied to gradient theories involving the accumulated plastic strain: The theories of Aifantis and Fleck and Hutchinson and their generalization. J. Mech. Phys. Solids 57, 405–421 (2008)
McBride A.T., Reddy B.D.: Some aspects of a discontinuous Galerkin formulation for gradient plasticity at finite strains. In: Reddy, B.D. (ed) Theoretical, Modelling and Computational Aspects of Inelastic Media. Proceedings of IUTAM Symposium, pp. 237–247. Springer, New York (2008)
Ekeland I., Temam R.: Convex Analysis and Variational Problems. North-Holland, Amsterdam (1976)
Carstensen C., Hackl K., Mielke A.: Nonconvex potentials and microstructures in finite-strain plasticity. Proc. R. Soc. A 458, 299–317 (2002)
Mielke A.: Energetic formulation of multiplicative elasto-plasticity using dissipation distances. Cont. Mech. Thermodyn. 15, 351–382 (2003)
Han W., Reddy B.D.: Computational plasticity: the variational basis, and numerical analysis. Comput. Mech. Adv. 2, 283–400 (1995)
Reddy, B.D.: The role of dissipation and defect energy in variational formulations of problems in strain-gradient plasticity. Part 2: single-crystal plasticity. Continuum Mech. Thermodyn. (2011). doi:10.1007/s00161-011-0195-8
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Andreas Öchsner.
An erratum to this article can be found at http://dx.doi.org/10.1007/s00161-011-0208-7
Rights and permissions
About this article
Cite this article
Reddy, B.D. The role of dissipation and defect energy in variational formulations of problems in strain-gradient plasticity. Part 1: polycrystalline plasticity. Continuum Mech. Thermodyn. 23, 527–549 (2011). https://doi.org/10.1007/s00161-011-0194-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00161-011-0194-9