Abstract
Contamination by potentially toxic elements (PTEs) in children’s toys and jewelry is an ongoing problem, and there is evidence in the literature that the issue is shifting towards developing countries and small markets. The present research aims (1) to characterize total concentrations of eleven PTEs (As, Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, and Zn) in children’s jewelry and toys purchased from the Central Asian market (n = 65), and (2) to investigate the relationship between the extent of contamination and sample categories/properties. The laboratory analyses showed that the majority of the samples had PTEs above the total and soluble limits for PTEs stated in the USA, Canadian, and the EU legislation. Particularly for metallic toys and jewelry (n = 46), the total concentrations in 45 samples exceeded the EU migration limits for one or more PTEs. In particular, Cu and Zn concentrations were extremely high (up to 100%) in many samples and highly toxic Cd and Pb were present in elevated quantities in several articles. Contamination was also present, albeit to a much lesser extent, in other toy categories: brittle/pliable toys for Co and Cr, plastic toys and jewelry for Pb, and other toys for Co. Although average values and visual observations suggested evidence, no statistically significant relationship between PTE concentrations and sample properties (color, price, and degree of appeal) could be found. The findings supported the evidence that the contamination issue in children’s jewelry and toys by PTEs is an ongoing issue in developing countries. Very high total concentrations of PTEs particularly found in several metallic samples warrant further investigation of migratable concentrations. Thus, conducting bioaccessibility tests and a subsequent human health risk characterization is recommended. Overall, there is a potential risk for children in the case of exposure to PTEs from children’s jewelry and toys sold on the Central Asian market. More effective enforcement of legislation for consumer goods in the region and raising public awareness regarding chemicals in children’s products are recommended.
Similar content being viewed by others
References
ASTM International (American Society for Testing and Materials) (2017) Standard consumer safety specification for toy safety. Designation: F963–17; ASTM International, West Conshohocken
Becker M, Edwards S, Massey R (2010) Toxic chemicals in toys and children’s products: limitations of current responses and recommendations for government and industry. Environ Sci Technol 44:7986–7991. https://doi.org/10.1021/es1009407
CDC (2006) Death of a child after ingestion of a metallic charm - Minnesota, 2006. http://www.cdc.gov/mmwr/preview/mmwrhtml/mm5512a4.htm. Accessed 4 April 2020
CDC (U.S. Centers for Disease Control and Prevention) (2003) Brief report: lead poisoning from ingestion of a toy necklace - Oregon, 2003. http://www.cdc.gov/mmwr/preview/mmwrhtml/mm5323a5.htm. Accessed 4 April 2020
Clesceri LS, Greenberg AE, Eaton AD (1999) Standard methods for the examination of water and wastewater, 20th edn. American Public Health Association, Washington
CPSC (n.d.) U.S. Consumer Product Safety Commission Recall List, https://www.cpsc.gov/Recalls. Accessed 4 April 2020
Cui X, Li S, Zhang S, Fan Y, Ma L (2015) Toxic metals in children’s toys and jewelry: coupling bioaccessibility with risk assessment. Environ Pollut 200:77–84. https://doi.org/10.1016/j.envpol.2015.01.035
Erbas Z, Karatepe A, Soylak M (2017) Heavy metal contents of play dough, face and finger paint samples sold in Turkish markets. Talanta 170:377–383. https://doi.org/10.1016/j.talanta.2017.04.025
Eurasian Customs Union (EACU) (2011) Technical regulations of Customs Union: About toys safety (ТР ТС 008/2011). http://www.eurasiancommission.org/ru/Lists/EECDocs/P_798_3.pdf. Accessed 4 April 2020
European Council (2009) Directive 2009/48/EC of the European Parliament and of the Council on the safety of toys (latest consolidated version: 26/11/2018), https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02009L0048-2018112. 6 Accessed 4 April 2020
Godoi Q, Leme F, Trevizan L, Pereira-Filho E, Rufini I, Santos D, Krug F (2011) Laser-induced breakdown spectroscopy and chemometrics for classification of toys relying on toxic elements. Spectrochim Acta B At Spectrosc 66:138–143. https://doi.org/10.1016/j.sab.2011.01.001
Government of Canada (2011) Toys Regulations (SOR/2011–17), https://laws-lois.justice.gc.ca/eng/regulations/SOR-2011-17/index.html. Accessed 4 April 2020
Government of Canada (2018) Children’s Jewelry Regulations (SOR/2018–82), https://laws-lois.justice.gc.ca/eng/regulations/SOR-2018-82/page-1.html. Accessed 4 April 2020
Government of Canada (n.d.) Recalls and safety alerts for consumer goods, http://healthycanadians.gc.ca/recall-alert-rappel-avis/index-eng.php?cat=4. Accessed 4 April 2020
Guney M, Zagury G (2011) Toxic chemicals in toys and children’s products. Environ Sci Technol 45:3819–3819. https://doi.org/10.1021/es200810s
Guney M, Zagury G (2012) Heavy metals in toys and low-cost jewelry: critical review of U.S. and Canadian legislations and recommendations for testing. Environ Sci Technol 46:4265–4274. https://doi.org/10.1021/es203470x
Guney M, Zagury G (2013) Contamination by ten harmful elements in toys and children’s jewelry bought on the north American market. Environ Sci Technol 47:5921–5930. https://doi.org/10.1021/es304969n
Guney M, Zagury G (2014a) Bioaccessibility of As, Cd, Cu, Ni, Pb, and Sb in toys and low-cost jewelry. Environ Sci Technol 48:1238–1246. https://doi.org/10.1021/es4036122
Guney M, Zagury G (2014b) Children’s exposure to harmful elements in toys and low-cost jewelry: characterizing risks and developing a comprehensive approach. J Hazard Mater 271:321–330. https://doi.org/10.1016/j.jhazmat.2014.02.018
Guney M, Nguyen A, Zagury G (2014) Estimating children’s exposure to toxic elements in contaminated toys and children’s jewelry via saliva mobilization. J Environ Sci Health A 49:1218–1227. https://doi.org/10.1080/10934529.2014.910028
Kang S, Zhu J (2013) Total lead content and its bioaccessibility in base materials of low-cost plastic toys bought on the Beijing market. J Mater Cycles Waste Manag 17(1):63–71. https://doi.org/10.1007/s10163-013-0223-9
Korfali S, Sabra R, Jurdi M, Taleb R (2013) Assessment of toxic metals and phthalates in children’s toys and clays. Arch Environ Contam Toxicol 65(3):368–381. https://doi.org/10.1007/s00244-013-9925-1
Mărginean C, Melit L, Moldovan H, Lupu V, Mărginean M (2016) Lead poisoning in a 16-year-old girl: a case report and a review of the literature (CARE compliant). Medicine 95:38. https://doi.org/10.1097/MD.0000000000004916
Negev M, Berman T, Reicher S, Balan S, Soehl A, Goulden S, Ardi R, Shammai Y, Hadar L, Blum A, Diamond ML (2018a) Regulation of chemicals in children’s products: how U.S. and EU regulation impacts small markets. Sci Total Environ 616-617:462–471. https://doi.org/10.1016/j.scitotenv.2017.10.198
Negev M, Berman T, Reicher S, Sadeh M, Ardi R, Shammai Y (2018b) Concentrations of trace metals, phthalates, bisphenol A and flame-retardants in toys and other children’s products in Israel. Chemosphere 192:217–224. https://doi.org/10.1016/j.chemosphere.2017.10.132
Pouzar M, Zvolska M, Jarolim O, Vavrusova AL (2017) The health risk of cd released from low-cost jewelry. Int J Environ Res Public Health 14:520. https://doi.org/10.3390/ijerph14050520
Rebelo A, Pinto E, Silva M, Almeida A (2015) Chemical safety of children’s play paints: focus on selected heavy metals. Microchem J 118:203–210. https://doi.org/10.1016/j.microc.2014.09.008
Thomas R (2004) Practical Guide to ICP-MS. Marcel Dekker, New York
Turner A (2018) Concentrations and migratabilities of hazardous elements in second-hand children’s plastic toys. Environ Sci Technol 52:3110–3116. https://doi.org/10.1021/acs.est.7b04685
Turner A (2019) Cadmium pigments in consumer products and their health risks. Sci Total Environ 657:1409–1418. https://doi.org/10.1016/j.scitotenv.2018.12.096
Turner A, Filella M (2017) Field-portable-XRF reveals the ubiquity of antimony in plastic consumer products. Sci Total Environ 584-585:982–989. https://doi.org/10.1016/j.scitotenv.2017.01.149
Turner A, Kearl E, Solman K (2015) Lead and other toxic metals in playground paints from South West England. Sci Total Environ 544:460–466. https://doi.org/10.1016/j.scitotenv.2015.11.078
Weidenhamer J, Clement M (2007) Leaded electronic waste is a possible source material for lead-contaminated jewelry. Chemosphere 69(7):1111–1115. https://doi.org/10.1016/j.chemosphere.2007.04.023
Weidenhamer J, Miller J, Guinn D, Pearson J (2011) Bioavailability of cadmium in inexpensive jewelry. Environ Health Perspect 119(7):1029–1033. https://doi.org/10.1289/ehp.1003011
Yung K, Wang W, Xiao T, Choy H, Mo X, Zhang S, Cai Z (2018) Laser polishing of additive manufactured CoCr components for controlling their wettability characteristics. Surf Coat Technol 351:89–98. https://doi.org/10.1016/j.surfcoat.2018.07.030
Zakon.kz online edition (2018) All toys imported to Kazakhstan must be certified (in Russian). Retrieved 7 February 2020. https://www.zakon.kz/4948864-vse-zavozimye-v-kazahstan-igrushki.html. Accessed April 2020
Funding
This study was financially supported by the Nazarbayev University.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Akimzhanova, Z., Guney, M., Kismelyeva, S. et al. Contamination by eleven harmful elements in children’s jewelry and toys from Central Asian market. Environ Sci Pollut Res 27, 21071–21083 (2020). https://doi.org/10.1007/s11356-020-08631-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-08631-5