Abstract
In the process of machine and machinery operation, it is inevitable to face problems such as friction and wear. At present, there are many solutions to solve the problem of friction and wear. As an effective method, surface texture technology has been widely concerned by scholars in China and abroad. In recent years, surface texture technology has made great achievements in the research of friction pair surface, which is of great significance to improve the surface tribological properties. In this paper, the background and development of surface texture are analyzed, and the research purpose and development status are pointed out. The friction mechanism of surface texture is summarized, and the reason of the mechanism is explained. The optimization of morphology and parameters was discussed, and the range of optimal parameters was obtained. Then the surface texture preparation technology is summarized, and the advantages and disadvantages of the main methods are summarized one by one. Then, the less studied composite texture and the synergistic effect of texture technology and other surface technologies are briefly introduced. The effect of composite texture on tribological properties depends on the type of texture combination, and the synergistic effect with other technologies can effectively improve the shortcomings of single technology, which is worthy of further study. Finally, the above aspects of the full text are summarized, and the problems faced in all aspects are put forward. Combined with the actual situation of the current research, the future development prospect of surface texture technology is prospected.
Similar content being viewed by others
Availability of data and material
Transparent.
Code availability
Not applicable.
References
Zhang B, Xu BS, Xu Y, Zhang BS (2011) Research status of micro-and nano-materials in lubricating additives. Tribology 31:194–204. https://doi.org/10.16078/j.tribology.2011.02.015
Rodrigues TA, Costa HL, da Silva Jr WM (2021) Sliding wear behavior of electrochemically textured surfaces under different lubrication regimes: effects of curvature radius. Wear.:203817. https://doi.org/10.1016/j.wear.2021.203817
Yu RF, Chen W (2017) Research progress and prospect of surface texturing in industrial tribology. J Mech Eng 53:100–110. https://doi.org/10.3901/JME.2017.03.100
Xu L, Zheng JH, Wu S, Wei XX, Wang JJ (2018) Recent development on surface texturing for improving tribological properties. Tool Eng 52:7–12. https://doi.org/10.16567/j.cnki.1000-7008.2018.04.002
Zhang SW (2001) An approach to the developing ways of tribology in China. Tribology 21:31–323. https://doi.org/10.16078/j.tribology.2001.05.001
Liu WM, Xue QJ (2000) Research and development of tribology. China Mechan Eng 11(1):77–80
Song TH (2008) Review of tribology development in China. Tribology 28:94–96. https://doi.org/10.16078/j.tribology.2008.01.001
Yu HW, Wang XL, Zhou F (2010) Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribol Lett 37:123–130. https://doi.org/10.1007/s11249-009-9497-4
Hao XQ, Song XL, Li L (2016) Development and perspective of surface texturing tools. Surf Technol 45:170–181. https://doi.org/10.16490/j.cnki.issn.1001-3660.2016.09.026
Yang C, Liu XJ, Yang HD, Liu K (2015) Effect of the textured surface on the cutting performance of the tool and the friction property for the rake face. Tribology 35:228–235. https://doi.org/10.16078/j.tribology.2015.02.015
Su YS, Li L, Fang M, Huang SZ (2019) Development and perspective of surface texture gear. Lubr Eng 44:125–129. https://doi.org/10.3969/j.issn.0254-0150.2019.12.022
Zhang JY, Meng YG (2012) Optimal design of surface texture in parallel thrust bearings. J Mech Eng 48:91–99. https://doi.org/10.3901/JME.2012.17.091
Wang GR, Liao DS, Jiang SK, He X, Liao WL, Zhong L, Jiang L, Yang CH (2018) Research progress of bionic surface texture and its application prospect in oil and gas equipment field. Surf Technol 47:14–22. https://doi.org/10.16490/j.cnki.issn.1001-3660.2018.08.003
Borghi A, Gualttieri E, Marchetto D, Moretti L, Valeri S (2008) Tribological effects of surface texturing on nitriding steel for high-performance engine applications. Wear 265:1046–1051. https://doi.org/10.1016/j.wear.2008.02.011
Deng JX, Wu Z, Lian YS, Qi T, Cheng J (2012) Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes. Int J Refract Met Hard Mater 30:164–172. https://doi.org/10.1016/j.ijrmhm.2011.08.002
Zhao WJ, Zeng ZX, Wang LP, Chen JM, Xue QJ (2011) Fabrication and wetting behaviors of regular textured silicon surfaces. China Surf Eng 24:4–10. https://doi.org/10.3969/j.issn.1007-9289.2011.03.002
He GQ, Sun N, He Y, Yan HZ, Deng SJ, Wang QL (2017) Influence of tooth surface pits of face-gears on isothermal elastohydrodynamic lubrication. Lubr Eng 42:67–76. https://doi.org/10.3969/j.issn.0254-0150.2017.02.013v
Qiu XC, Fan ST, Wu Y (2013) Study of surface texture for improving friction and wear properties. Lubr Eng 38:121–124. https://doi.org/10.3969/j.issn.0254-0150.2013.08.025
Zhang H, Liu Y, Wang W, Qin LG, Dong GN (2019) Surface texture design and its tribological application. J Mech Eng 55:85–93. https://doi.org/10.3901/JME.2019.17.085
Cai X (2018) The optimal design of micro-textured turning tools and study on their cutting performance. Master Thesis, School of Mechanical Engineering Southeast University, Nanjing
Hamilton DB, Walowit JA, Allen CMA (1966) Theory of lubrication by micro asperities. J Basic Eng 88:177–185. https://doi.org/10.1115/1.3645799
Etsion (2004) Improving tribological performance of mechanical components by laser surface texturing. Tribol Lett 17:733–737. https://doi.org/10.1520/STP38293S
Wang JQ, Wang XL (2015) State of the art in innovative design of surface texture. J Mech Eng 51:84–95. https://doi.org/10.3901/JME.2015.23.084
Zhang SW (2018) Prospects for the development of biomimetic tribology. Lubr Eng 43:1–2. https://doi.org/10.3969/j.issn.0254-0150.2018.01.001
Liu XM, Zhao DC, Chen L, Luo LH (2019) Biomimetic biological tribological development status and application prospect. Chin J Constr Mach 17:95–101. https://doi.org/10.15999/j.cnki.311926.2019.02.001
Huang QP, Shi XL, Xue YW, Zhang KP, Wu CH (2021) Optimization of bionic textured parameter to improve the tribological performance of AISI 4140 self-lubricating composite through response surface methodology. Tribol Int 161:107104. https://doi.org/10.1016/j.triboint.2021.107104
Huang W, Wang XL (2013) Biomimetic design of elastomer surface pattern for friction control under wet conditions, Bioinspir. Biomim 8:1–6. https://doi.org/10.1088/1748-3182/8/4/046001
Zhang H, Zhang D, Hua M (2014) A study on the tribological behavior of surface texturing on babbitt alloy under mixed or starved lubrication. Tribol Lett 56:305–315. https://doi.org/10.1007/s11249-014-0410-4
Etsion G, Halperin T (2002) A laser surface textured hydrostatic mechanical seal. Tribol Trans 45:430–434. https://doi.org/10.1080/10402000208982570
Zhang H, HUA M, Dong GN, Zhang DY, Chin KS (2015) A mixed lubrication model for studying tribological behaviors of surface texturing. Tribol Int 93:583–592. https://doi.org/10.1016/j.triboint.2015.03.027
Tang W, Zhou Y, Hu H, Yang HF (2013) The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact. Appl Surf Sci 273:199–204. https://doi.org/10.1016/j.apsusc.2013.02.013
Hu CY, Wan XL, Wu KM, Xu DM, Li GQ, Xu G, Misra RDK (2020) On the impacts of grain refinement and strain-induced deformation on three-body abrasive wear responses of 18Cr–8Ni austenitic stainless steel. Wear 446-447:203181. https://doi.org/10.1016/j.wear.2019.203181
Yilbas BS, Khaled M, Abu-Dheir N, Furquan SZ (2013) Laser texturing of alumina surface for improved hydrophobicity. Appl Surf Sci 286:161–170. https://doi.org/10.1016/j.apsusc.2013.09.040
Yang X, Peng XD, Meng XK, Jiang JB, Wang YM (2019) Thermo-elasto-hydrodynamic analysis of triangular textured mechanical face seals. J Zhejiang Univ Sci A 20:864–881. https://doi.org/10.1631/jzus.A1900163
Wang T, Huang WF, Liu XF, Li YJ, Wang YM (2014) Experimental study of two-phase mechanical face seals with laser surface texturing. Tribol Int 72:90–97. https://doi.org/10.1016/j.triboint.2013.12.009
Meng XK, Bai SX, Peng XD (2014) Lubrication film flow control by oriented dimples for liquid lubricated mechanical seals. Tribol Int 77:132–141. https://doi.org/10.1016/j.triboint.2014.04.020
Chen WJ, Meng XK, Wang YM, Liang YY, Peng XD (2019) Finite element model and tribological properties analysis of textured mechanical seals considering roughness effect. Tribology 39:523–531. https://doi.org/10.16078/j.tribology.2019004
Yin BF, Lu ZT, Liu SJ, Fu YH, Wang Y (2012) Theoretical and experimental research on lubrication performance of laser surface texturing cylinder liner. J Mech Eng 48:91–96. https://doi.org/10.3901/JME.2012.21.091
Hu LH, Mo JL, Wang DW, Yang JZ, Chen GX, Zhu MH (2016) Groove-textured and pit-textured surfaces to suppress friction-induced squeal noise. China Mechan Eng 27:1158–1164. https://doi.org/10.3969/j.issn.1004-132X.2016.09.004
Wang DW, Mo JL, Wang ZG, Wang XC, Chen GX, Zhu MH (2013) Mechanism of the effect of groove-textured surface on the friction vibration and noise. J Mech Eng 49:112–116. https://doi.org/10.3901/JME.2013.23.112
Niu YX, Pang XJ, Li YJ, Shangguan B, Zhang YZ (2019) Effects of sliding speed and load levels on tribological properties of dimple-textured surfaces under starved lubrication. China Surf Eng 32:140–149. https://doi.org/10.11933/j.issn.1007-9289.20190506001
Liu GS, Sun J, Li B, Zhu SY (2019) Lubrication analysis of oil-control-ring and cylinder liner frictional pair considering oil feeding condition. J Mech Eng 55:102–109. https://doi.org/10.3901/JME.2019.07.102
Li JL, Chen P, Shao TM, Xiang X (2016) The effect of gourd-shaped surface texture on tribological performance of stainless steel. Tribology 36:207–214. https://doi.org/10.16078/j.tribology.2016.02.010
Zeng SS, Li JB, Chen PF, Cui YG (2019) Effect of stator surface texture on the performances of an ultrasonic motor. Tribology 39:504–510. https://doi.org/10.16078/j.tribology.2019015
Wu YB, Yang XF, Wang SR, Cheng J, Zhang H, Lu CY, Chen HL (2019) Tribological properties of V-shaped surface texture under oil lubrication condition. J Northwest Polytech Univ 37:401–406. https://doi.org/10.1051/jnwpu/20193720401
Xie Y, Song WT, Chen WG, Liu DC, Chen L (2020) Effect of triangular surface micro-texture on tribological properties of 304 steel. Surf Technol. https://doi.org/10.16490/j.cnki.issn.1001-3660.2021.04.022
Yin MH, Chen GD, Gao DC, Wang L (2016) Effects of three types of surface texture on the performances of journal bearing. J Harbin Instit Technol 48:159–164. https://doi.org/10.11918/j.issn.0367-6234.2016.01.024
Han J, Fang L, Sun JP, Wang YQ, Ge SR, Zhu H (2011) Hydrodynamic lubrication of surfaces with asymmetric microdimple. Tribol Trans 54:607–615. https://doi.org/10.1080/10402004.2011.584364
Mao Y, Zeng LC, Lu Y (2016) Modeling and optimization of cavitation on a textured cylinder surface coupled with the wedge effect. Tribol Int 104:212–224. https://doi.org/10.1016/j.triboint.2016.09.002
Zhang Y, Chen GD, Wang L, Ge YP (2017) Analysis of bearing load-carrying capacity with asymmetric surface textures under coupling effects of cavitation and inertia effect. J Northwest Polytech Univ 35:1026–1032
Shen C, Khonsari MM (2015) Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding. Tribol Int 82:1–11. https://doi.org/10.1016/j.triboint.2014.09.022
Zhou HY, Shi XL, Yang ZY, Wu CH, Lu GC, Xue YW (2020) Tribological property and frictional noise performance of titanium alloys with Sn-Ag-Cu and TiC filled into surface dimples. Tribol Int 144:106121. https://doi.org/10.1016/j.triboint.2019.106121
Hou QM, Yang XF, Cheng J, Wang SR, Duan DR, Xiao JP, Li WY (2020) Optimization of performance parameters and mechanism of bionic texture on friction surface. Coatings 171:1–18. https://doi.org/10.3390/coatings10020171
Pettersson U, Jacobson S (2003) Influence of surface texture on boundary lubricated sliding contacts. J Tribol 36:857–864. https://doi.org/10.1016/S0301-679X(03)00104-X
Wu Z, Deng JX, Xing YQ, Cheng J, Zhao J (2012) Cutting performance of self-lubricating turning tools with elliptical micro-textures. Trans Chin Soc Agricult Mach 43(7):228–234. https://doi.org/10.6041/j.issn.1000-1298.2012.07.042
Yu HW, Huang W, Wang XL (2011) Dimple patterns design for different circumstances. Lubr Sci 25:67–78. https://doi.org/10.1002/ls.168
Yang ZJ, Han ZW, Ren LQ (2005) Friction and wear behavior of bionic non-smooth surfaces at high temperature. Tribology 25:374–378. https://doi.org/10.16078/j.tribology.2005.04.018
Kawasegi N, Sugimori H, Morimoto H, Morita N, Hori I (2009) Development of cutting tools with microscale and nanoscale textures to improve frictional behavior. Precis Eng 33:248–254. https://doi.org/10.1016/j.precisioneng.2008.07.005
Ma GL, Jiang L, Huang W, Wang XL (2010) Lubrication properties of textured polydimethylsiloxane surfaces with different roughness. J Xi ' an Jiaotong Univ 44:87–92 CNKI:SUN:XAJT.0.2010-09-019
Li D, Yang XF, Lu CY, Cheng J, Wang SR, Wang YJ (2020) Tribological characteristics of a cemented carbide friction surface with chevron pattern micro-texture based on different texture density. Tribol Int 142:106016. https://doi.org/10.1016/j.triboint.2019.106016
Arslan A, Masjuki HH, Varman M, Kalam MA, Quazi MM, Al Mahmud KAH (2015) Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition. Appl Surf Sci 365:1135–1149. https://doi.org/10.1016/j.apsusc.2015.08.194
Xu YF, Zheng Q, Abuflaha R, Dustin O, Furlong O, You T, Zhang QQ, Hu XG, Tysoe WT (2019) Influence of dimple shape on tribofilm formation and tribological properties of textured surfaces under full and starved lubrication. Tribol Int 136:267–275. https://doi.org/10.1016/j.triboint.2019.03.047
Su FH, Mao C, Li ZJ (2019) Experiment and simulation study on the effect of texture depth on tribological properties of stainless steel surface under oil lubricating condition. Tribology 32:181–187. https://doi.org/10.16078/j.tribology.2018143
Ji JH, Fu YH, Hua XJ, Fu H, Kang ZY (2014) Tribological properties of 45 steel surface with V-Grooves. China Surf Eng 27:107–111. https://doi.org/10.3969/j.issn.1007-9289.2014.04.017
Ji JH, Zhou JP, Wang MY, Wang W, Fu YH (2019) Effect of initial roughness on the tribological properties of textured surfaces with micro-grooves. Surf Technol 48:139–143. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.02.020
Lu CY, Yang XF, Wang SR, Wang YJ, Wu YB, Chen HL (2018) Dynamic pressure lubrication and anti-friction characteristics of the cemented carbide with triangular grooved microtexture. Tribology 38:537–546. https://doi.org/10.16078/j.tribology.2018.05.006
He X, Zhong L, Wang GR, Yang CH, Jiang L (2014) Tribological properties of fracturing seal with textured plunger. Tribology 34:364–370. https://doi.org/10.16078/j.tribology.2014.04.004
Shen ZH, Wang FC, Chen ZG, Ruan XP, Zeng HH, Wang JH, An YR, Fan XL (2021) Numerical simulation of lubrication performance on chevron textured surface under hydrodynamic lubrication. Tribol Int 154:106704. https://doi.org/10.1016/j.triboint.2020.106704
Wang HT, Li Y, Zhu H (2016) Effect of geometry parameters and patterns on tribological properties of textured surface with elliptical dimples. Tribology 36:77–83. https://doi.org/10.16078/j.tribology.2016.01.012
Liu HB, Meng YG (2007) Hydrodynamic lubrication analysis of textured surfaces with the domain decomposition method-effect of texture distribution patterns. Tribology 27:555–561. https://doi.org/10.16078/j.tribology.2007.06.005
Miao CW, Guo ZW, Yuan CQ (2019) Effects of bionic multi-scales groove textures on surface tribological properties. China Surf Eng 32:22–30. https://doi.org/10.11933/j.issn.1007-9289.20181010001
Niu YX, Pang XJ, Yue SW, Shangguan B, Zhang YZ (2021) The friction and wear behavior of laser textured surfaces in non-conformal contact under starved lubrication. Wear.:203723. https://doi.org/10.1016/j.wear.2021.203723
Dhadda G, Hamed M, Koshy P (2021) Electrical discharge surface texturing for enhanced pool boiling heat transfer. J Mater Process Technol 293:117083. https://doi.org/10.1016/j.jmatprotec.2021.117083
Walbrühl M, Linder D, Ågren J, Borgenstam A (2018) Alternative Ni-based cemented carbide binder -hardness characterization by nano-indentation and focused ion beam. Int J Refract Met Hard Mater 73:204–209. https://doi.org/10.1016/j.ijrmhm.2018.02.017
Zhao WJ, Wang LP, Xue QJ (2001) Development and research progress of surface texturing on improving tribological performance of surface. Tribology 31:622–631. https://doi.org/10.16078/j.tribology.2011.06.016
Kumar V, Verma R, Kango S, Sharma VS (2021) Recent progresses and applications in laser-based surface texturing systems. Mater Today Commun 26:101736. https://doi.org/10.1016/j.mtcomm.2020.101736
Zanet AD, Casalegno V, Salvo M (2020) Laser surface texturing of ceramics and ceramic composite materials –a review. Ceram Int 47:7307–7320. https://doi.org/10.1016/j.ceramint.2020.11.146
Braun D, Greiner C, Schneider J, Gumbsch P (2014) Efficiency of laser surface texturing in the reduction of friction under mixed lubrication. Tribol Int 77:142–147. https://doi.org/10.1016/j.triboint.2014.04.012
Ming WY, Jia HJ, Zhang HM, Zhang Z, Liu K, Du JG, Shen F, Zhang GJ (2020) A comprehensive review of electric discharge machining of advanced ceramics. Ceram Int 46:21813–21838. https://doi.org/10.1016/j.ceramint.2020.05.207
Koshy P, Tovey J (2011) Performance of electrical discharge textured cutting tools. CIRP Ann Manuf Technol 60:153–156. https://doi.org/10.1016/j.cirp.2011.03.104
Yamaguchi K, Takada Y, Tsukuda Y, Ota M, Egashira K, Morita T (2016) Friction characteristics of textured surface created by electrical discharge machining under lubrication. Proc CIRP 42:662–667. https://doi.org/10.1016/j.procir.2016.02.298
Jithin S, Raut A, Bhandarkar UV, Joshi SS (2020) Finite element model for topography prediction of electrical discharge textured surfaces considering multi-discharge phenomenon. Int J Mech Sci 177:105604. https://doi.org/10.1016/j.ijmecsci.2020.105604
Laing ZQ, Li MZ, Chen BC, Zhou TF, Li SD, Yan P, Zhang SY, Wang XB (2020) Fabrication and cutting performance of micro-textured tools based on micro-grinding. Surf Technol 49:143–150. https://doi.org/10.16490/j.cnki.issn.1001-3660.2020.02.017
Chang WL, Sun JN, Luo XC, Ritchie JM, Mack C (2011) Investigation of microstructured milling tool for deferring tool wear. Wear 271:2433–2437. https://doi.org/10.1016/j.wear.2010.12.026
Liu F, Guo XH, Han YJ, Wang CD, Liu TS, Dong BZ, Zhang KD (2020) Study on fabrication method of micro-textures on cemented carbide surface based on ion beam etching-assisted laser. Surf Technol 50(4):103–112. https://doi.org/10.16490/j.cnki.issn.1001-3660.2021.04.010
Han ZL, Wang JD, Chen DR (2007) The frication-reduce effect with different depth of concave on the oil-lack lubrication. Lubr Eng 32:18–20 CNKI:SUN:RHMF.0.2007-03-006
Pettersson U, Jacobson S (2004) Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribol Lett 17:553–559. https://doi.org/10.1023/B:TRIL.0000044504.76164.4e
Qian SQ (2011) Fundamental research on electrochemical micromachining of surface texture and applications. Doctoral Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing
Mao B, Siddaiah A, Liao YL, Menezes PL (2020) Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: a review. J Manuf Process 53:153–173. https://doi.org/10.1016/j.jmapro.2020.02.009
Jain A, Kumari N, Jagadevan S, Bajpai V (2020) Surface properties and bacterial behavior of micro conical dimple textured Ti6Al4V surface through micro-milling. Surf Interf 53:153–173. https://doi.org/10.1016/j.jmapro.2020.02.009
Shen XH, Shi YL, Zhang JH, Zhang QJ, Tao GC, Bai LJ (2020) Effect of process parameters on micro-textured surface generation in feed direction vibration assisted milling. Int J Mech Sci 167:105267. https://doi.org/10.1016/j.ijmecsci.2019.105267
Huang FQ, Jin XL (2021) Surface texture generation using high-feed milling with spindle speed modulation. Precis Eng 73:13–24. https://doi.org/10.1016/j.precisioneng.2021.04.005
Cai CY, An QL, Ming WW, Chen M (2021) Modelling of machined surface topography and anisotropic texture direction considering stochastic tool grinding error and wear in peripheral milling. J Mater Process Technol 292:117065. https://doi.org/10.1016/j.jmatprotec.2021.117065
Kang CW, Liang FS, Shen G, Wu DX, Fang FZ (2021) Study of micro-dimples fabricated on alumina-based ceramics using micro-abrasive jet machining. J Mater Process Technol 297:117181. https://doi.org/10.1016/j.jmatprotec.2021.117181
Natarajana Y, Murugesanb PM, Mohanb M, Khan SALA (2020) Abrasive water jet machining process: a state of art of review. J Manuf Process 49:271–322. https://doi.org/10.1016/j.jmapro.2019.11.030
Li HZ, Wang J, Kwok N, Nguyenc T, Yeoh GH (2018) A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining. J Manuf Process 31:156–161. https://doi.org/10.1016/j.jmapro.2017.11.013
Wos S, Koszelo W, Pawlus P (2014) Tribological behaviours of textured surfaces under conformal and non-conformal starved lubricated contact conditions. J Eng Tribol 229:1–12. https://doi.org/10.1177/1350650114535759
Wu Z, Bao H, Xing YQ, Liu L (2021) Tribological characteristics and advanced processing methods of textured surfaces: a review. Int J Adv Manuf Technol 114:1241–1277. https://doi.org/10.1007/s00170-021-06954-2
Melentieva R, Fang FZ (2020) Fabrication of micro-channels on Co–Cr–Mo joints by micro-abrasive jet direct writing. J Manuf Process 56:667–677. https://doi.org/10.1016/j.jmapro.2020.05.022
Pal VK, Choudhury SK (2015) Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining. Int J Adv Manuf Technol 85:2061–2071. https://doi.org/10.1007/s00170-015-7875-7
Fang X, Yan ZJ, Wang JH, Shen ZY (2020) Effect of micro-convex texture on lubrication performance of friction pair considering cavitation phenomenon. Lubr Eng 45:32–41. https://doi.org/10.3969/j.issn.0254-0150.2020.12.006
Li YN, Zhang Y, Feng TT, Lan HB, Peng ZL (2019) Simulation study on hydrodynamic lubrication performance of convex texture surface based on discharge deposition. Surf Technol 48:59–67. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.08.009
Suh MS, Chae YH, Kim SS, Hinoki T, Kohyama A (2010) Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction. Tribol Int 43:1508–1517. https://doi.org/10.1016/j.triboint.2010.02.012
Yin BF, Qian YQ, Lu ZT, Wang BW, Sun S (2014) Theoretical and experimental study on lubrication performance of composite textures on cylinder liner. J Xi ' an Jiaotong Univ 48:74–81. https://doi.org/10.7652/xjtuxb201409013
Segu DZ, Choi SG, Choi JH, Kim SS (2013) The effect of multi-scale laser textured surface on lubrication regime. Appl Surf Sci 270:58–63. https://doi.org/10.1016/j.apsusc.2012.12.068
Wang GR, Liao WL, Zhao MJ (2019) Simulation analysis on hydrodynamic lubrication performance of fracturing pumper plunger seal with compound texture. Lubr Eng 44:20–30. https://doi.org/10.3969/j.issn.0254-0150.2019.01.004
Meng FM, Zhang L, Liu Y, Li TT (2015) Effect of compound dimple on tribological performances of journal bearing. Tribol Int 91:99–110. https://doi.org/10.1016/j.triboint.2015.06.030
Meng FM, Yu HY, Gui C, Chen L (2019) Experimental study of compound texture effect on acoustic performance for lubricated textured surfaces. Tribol Int 133:47–54. https://doi.org/10.1016/j.triboint.2018.12.036
Wang JG, Chen SH (2014) Bionic design of Koch snowflake surface texture and its effects on air frictional noise of high speed train. J Mech Eng 2014(50):78–83. https://doi.org/10.3901/JME.2014.07.078
Fu JG, Ma SL, Zhu XH, Ma CS, Xu CQ, Zhu JQ (2019) Influence of solid lubricant WS2 on the tribological properties of micro-arc oxidation ceramic coating of Al alloy. Surf Technol 48:150–157. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.07.016
Mo CC, Li CS, Jin Y, Liao DH (2011) Preparation of TiWN/WS2 film by magnetron sputtering and it’s microstructure and tribological properties. Surf Technol 40:48–56. https://doi.org/10.16490/j.cnki.issn.1001-3660.2011.03.022
Wang LJ, Yang JS (2010) The study on tribological properties of MoS2/TiN composite coating on the surface of titanium alloy. Surf Technol 39:11–13. https://doi.org/10.16490/j.cnki.issn.1001-3660.2010.02.020
Hu TC, Hu LT, Zhang YS (2012) Preparation of composite lubrication structure and its tribological properties on 45# steel. Surface Tribol 32:14–20. https://doi.org/10.16078/j.tribology.2012.01.011
Hu TC, Hu LT, Ding Q (2012) Effective solution for the tribological problems of Ti-6Al-4V: combination of laser surface texturing and solid lubricant film. Surf Coat Technol 206:5060–5066. https://doi.org/10.1016/j.surfcoat.2012.06.014
Wang AY, Wang DW, Fan ZY, Wu YK, Xiang ZY, Mo JL (2019) Synergistic effect of surface groove and lubricant on friction-induced vibration and noise characteristics. Surf Technol 48:16–22. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.08.003
Qiao JF, Chang QY (2016) Influence of surface texture on the tribological properties of molybdenum disulfide spraying film. Lubr Eng 41:55–58. https://doi.org/10.3969/j.issn.0254-0150.2016.01.010
Cao L, Wan Y, Gao JG (2016) Tribological performance of MoS2 film on chemically textured surface of 45# steel. Surf Technol 45:83–88. https://doi.org/10.16490/j.cnki.issn.1001-3660.2016.10.013
Funding
This work was supported by the National Natural Science Foundation of China (51872122) and the Postdoctoral Science Foundation of China (2017M620286)and the Key Research and Development Program of Shandong Province, China (2018CXGC0809) and Major Basic Research Projects of Shandong Natural Science Foundation (ZR2020ZD06) and Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program (2019KJB021) and Experts from Taishan Scholars and Youth Innovation in Science & Technology Support Plan of Shandong Province University.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Chen, K., Yang, X., Zhang, Y. et al. Research progress of improving surface friction properties by surface texture technology. Int J Adv Manuf Technol 116, 2797–2821 (2021). https://doi.org/10.1007/s00170-021-07614-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-021-07614-1