Abstract
This paper describes the successful test operation of a 50 t/h concentrate feed rate (or on the anode copper basis 9000 tlm) with the Mitsubishi Process. Particular emphasis is given to the analyses of the furnace capacity by the measurement of flow pattern and oxygen potential. Smelting rate on the unit hearth area of the smelting furnace is now one-ton of concentrate/m2·h. The results of the analyses show the further potential of the furnace capacity of the process.
Similar content being viewed by others
References
T. Suzuki et al., “Test Operation for Smelting More Tonnages of Copper Concentrates at the Mitsubishi Continuous Copper Smelting and Converting Process,” (Paper presented at the 112th AIME Annual Meeting, Atlanta, Georgia, March 1983).
M. Goto and N. Kikumoto, “Intensive Operation of the Mitsubishi Process,” (Paper presented at IMM- CSM Joint Meeting, Kunming, People’s Republic of China, Oct. 1984).
M. Goto and N. Kikumoto, “Process Analysis of Mitsubishi Continuous Copper Smelting and Converting Process,” (Paper presented at the 110th AIME Annual Meeting, Chicago, Illinois, Feb. 1981).
J. Szekely and N.J. Themelis, Rate Phenomena in Process Metallurgy, (Wiley Interscience, 1971), pp. 515–555.
Z. Kozuka, “Application of Zirconia Oxygen Sensors on the Non-ferrous Metallurgy,” (Paper presented at MMIJ/AusIMM Joint Symposium, Sendai, Oct. 1983).
R.A. Rapp, Techniques of Metals Research, ed. B.F. Bunshah (New York, N.Y., Physicochemical Measurement in Metals Research, IV-2, Interscience Pub., 1970), p. 123.
J.M. Floyd, D.C. Conschie and N.C. Grave, “Measurement of Oxygen Potential in Slags in a Nickel Smelter Using Disposable-tip EMF Cells,” Proc. Aust. Inst. Min. Metal, 1979, No. 270: pp. 15–23.
J. Lumsden, Physical Chemistry of Process Metallurgy, ed. G.R. St. Pierre (New York, N.Y., Interscience, 1961), p. 175.
A. Yazawa et al., eds., Non-ferrous Extractive Metallurgy, (Japan Inst. Metals., 1980), pp. 315–321.
A. Yazawa, “Thermodynamic Considerations of Copper Smelting,” Canadian Metal. Quarterly, 13 (3) (1974), pp. 443–453.
A. Yazawa and Y. Takeda, “Slag-Metal Equilibria between Liquid Copper and Calcium Ferrite Slag,” Trans. Japan Inst. Metals, 23 (6) (1983), pp. 328–333.
R.L. Altman, Anal. Chim. Acta., 63, (1973), pp. 129–138.
Additional information
Editor’s Note: This paper is adapted from a TMS Technical Paper which was originally presented at the 1986 TMS Annual Meeting in New Orleans.
M. Goto is currently with the Department of Metallurgy at Mitsubishi Metal Corporation in Tokyo, Japan. He is also a member of TMS.
S. Kawakita is currently with the Naoshima Smelter and Refinery of the Mitsubishi Metal Corporation in Naoshima, Kagawa, Japan. He is also a member of TMS.
N. Kikumoto is currently in the Technical Department of the Japan Silicon Company, Ltd., Noda, Chiba, Japan. He is also a member of TMS.
O. Ilda is currently with the Naoshima Smelter and Refinery at the Mitsubishi Metal Corporation, Naoshima, Kagawa, Japan.
Rights and permissions
About this article
Cite this article
Goto, M., Kawakita, S., Kikumoto, N. et al. High Intensity Operation at Naoshima Smelter. JOM 38, 43–46 (1986). https://doi.org/10.1007/BF03258688
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03258688