Abstract
Two types of nano composite were obtained byin situ chemical method in polyaniline (PANI)/dodecylbenzenesulfonic acid (DBSA) system depending on the use of either ammonium persulfate (APS) or ferric chloride (FeCl3) as the oxidant. In order to study the difference of the two composites in the surface characteristics, thermal stability, and electric properties, the composite films were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and temperature dependent DC electrical conductivity. The results revealed a large difference in the surface morphology, thermal stability, and the microstructure properties between the two composites, and these differences were considered responsible for the molecular order and conductivity.
Similar content being viewed by others
References
E. M. Genies, A. Boyle, M. Lapkowski, and C. Tsintavis,Synth. Met.,36, 139 (1990).
C. M. Finch, S. Srichantaropass, S. W. Bailey, I. M. Grace, V. M. García-Suárez, and C. J. Lambert,J. Phys.: Condens. Matter.,20, 22203 (2008).
A. Skotheim,Handbook of Conducting Polymers, New York, Marcel Dekker, 1986, Vol. 1.
H. S. Nalwa,Handbook of Organic Conductive Molecules and Polymers, New York, Wiley, 1997, Vol. 4.
M. G. Guenza,J. Phys.: Condens. Matter.,20, 33101 (2008).
C. R. Martin,Chem. Mater.,8, 1739 (1996).
I. D. Norris, M. M. Shaker, F. K. Ko, and A. G. MacDiarmid,Synth. Met.,114, 109 (2000).
X. Y. Zhang, W. J. Goux, and S. K. Manohar,J. Am. Chem. Soc.,126, 4502 (2004).
J. X. Huang, S. Virji, B. H. Weiller, and R. B. Kaner,J. Am. Chem. Soc.,125, 314 (2003).
Z. Wei, Z. Zhang, and M. Wan,Langmuir,18, 917 (2002).
Z. Wei and M. Wan,Adv. Mater.,14, 1314 (2002).
D. Wang and F. Caruso,Adv. Mater.,13, 350 (2001).
W. L. Macknight, E. A. Ponomarenko, and D. A. Tirrell,Acc. Chem. Res.,31, 781 (1998).
T. Jana and A. K. Nandi,Langmuir,17, 5768 (2001).
T. Jana, J. Chatterjee, and A. K. Nandi,Langmuir,18, 5720 (2002).
J. Ruokolainen, R. Makinen, M. Torkkeli, T. Makela, R. Serimaa, G. ten Brinke, and O. Ikkala,Science,280, 557 (1998).
D. Tsotcheva, T. Tsanov, L. Terlmezyam, and S. Vassilev,J. Therm. Anal.,63, 133 (2001).
W. Jia, E. Segal, D. Kornemandel, Y. Lamhot, M. Narkis, and A. Siegmann,Synth. Met.,128, 115 (2002).
C. Basavaraja, Y. Veeranagouda, K. Lee, R. Pierson, S. H. Park, E. J. Jeon, and D. S. Huh, Eur. Polym. J. (submitted for publication) (2008).
C. Basavaraja, R. Pierson, and D. S. Huh,J. Appl. Polym. Sci.,108, 1070 (2008).
C. Basavaraja, R. Pierson, T. K. Vishnuvardhan, and D. S. Huh,Eur. Polym. J.,44, 1556 (2008).
M. Antonietti, D. Radloff, U. Niesner, and H. W. Spiess,Macromol. Chem. Phys.,197, 2713 (1996).
M. Antoniett, A. Wenzel, and A. Thunemann,Langmuir,12, 2111 (1996).
P. Chowdhury and B. Saha,J. Appl. Polym. Sci.,103, 1626 (2007).
Y. Z. Wang, Y. C. Hsu, L. C. Chou, and K. H. Hsieh,J. Polym. Res.,11, 127 (2004).
A. Gok, B. Sari, and M. Talu,Synth. Met.,142, 41 (2004).
A. Gok, M. Omastov, and A. Y. Gul,Synth. Met.,157, 23 (2007).
A. A. Athawale, M. V. Kulkarni, and V. V. Chabukswar,Mater. Chem. Phys.,73, 106 (2002).
S. A. Chen and H. T. Lee,Synth. Met.,47, 233 (1992).
M. Wan, M. Li, J. Li, and Z. Liu,J. Appl. Polym. Sci.,53, 131 (1994).
D. Das, S. Kar, S. Chakraborty, D. Chakraborty, and S. Gangopadhyay,J. Appl. Polym. Sci.,69, 841 (1998).
P. R. Somani, R. Marimuthu, and A. B. Mandale,Polymer,42, 2991 (2001).
C. H. Chen,J. Polym. Res.,9, 195 (2002).
M. Wan, M. Li, J. Li, and Z. Liu,J. Appl. Polym. Sci.,53, 131 (1994).
M. Zilberman, G. I. Titelman, A. Siegmann, Y. Haba, M. Narkis, and D. Alperstein,J. Appl. Polym. Sci.,66, 243 (1998).
M. E. Leyva, G. M. O. Barra, and B. G. Soares,Polímeros,12, 197 (2002).
J. K. Choi, Y. W. Kim, and J. H. Koh,Marcromol. Res.,15, 553 (2007).
H. Namgoong, D. J. Woo, and S. H. Lee,Marcromol. Res.,15, 633 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Basavaraja, C., Pierson, R., Huh, D.S. et al. Studies on properties of polyaniline-dodecylbenzene sulfonic acid composite films synthesized using different oxidants. Macromol. Res. 17, 609–615 (2009). https://doi.org/10.1007/BF03218917
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF03218917