Abstract
When raw materials were preheated to 1000–1300°C by electricity and microwave was inputted for 1 min 5 s-4 mins, then alunminate clinkers were obtained. The f-CaO contents, XRD patterns and lithofacies analysis show that the microwave processing accelerates the clinkering reaction, and Fe2O3 is contributed to the aluminate cement clinkering. The appearance of liquid phase in process of microwave heating increases the microwave absorbability of materials greatly.
Similar content being viewed by others
References
Jin qinhan, Dai Shushan, Huang Kama.Microwave Chemistry. Beijing: Science Publishing Company, 1999
Yi Fang, Della M. Roy, Rustum Roy. Microwave Clinkering of Ordinary and Colored Portland Cements.Cem. Conr. Res., 1996, 26(1):41–47
Haoxuan Li, Dinessh K Agrawal, Jiping Cheng, Michael R Silbee. Formation and Hydration of C3S Prepared by Microwave and Conventional Sintering.Cem. Conr. Res., 1999, 29: 1611–1617
Shizong Long, Caixia Yan, Jianmiao Dong. Microwave-promoted Buring of Portland Cement Clinker.Cem. Conr. Res., 2002, 132(1):17–21
Shizong Long, Jianmiao Dong, Caixia Yan. Microwave Sintering of Sulfo-aluminate Cement Clinker.Journal of the Chinese Ceramic Society, 29(4):309–312
Jianmiao Dong, Shizhong Long. Microwave Sintering of Ca4Al6SO16, Ca3SrAl6SO16, Ca3BaAl6SO16.J. Wuhan University of Technology, 2002, 24(12):11–13
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jianmiao, D., Shizong, L. Effect of microwave processing on aluminate cement clinkering. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 20, 77–79 (2005). https://doi.org/10.1007/BF02838495
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02838495