Abstract
Squeeze casting is a pressurized solidification process whose conception in Russia dates back over a hundred years. It has been cited frequently since 1950 as a major production process in Soviet foundries. The process has recently been commercialized in Japan for automotive wheels; and considerable progress appears to have been made in the United States towards squeezecast diesel engine pistons. This paper reviews recent progress in developing and applying squeeze casting in these countries. Process parameters and details for ferrous and nonferrous applications are also covered, along with the highlights of a recently concluded experimental program for squeeze casting mortar shells from ductile iron.
Similar content being viewed by others
References
V. M. Plyatskii:Extrusion Casting, Primary Sources, New York, 1965.
J. L. Reiss and E. C. Kron:Mod. Cast., 1960, vol. 37, no. 3, pp. 89–96.
Y. Kaneko, H. Murakami, K. Kuroda, and S. Nakazaki:Die Cast. Eng., May–June 1979, pp. 26–38.
M. F. McGuire:Diesel and Gas Turbine Progress, September 1979, pp. 59–60.
S. Rajagopal, A. Chakravartty, and D. Gustad:IIT Research Institute, Final Report, No. ARLCD-CR-80018, ARRADCOM Contract No. DAAK10-78-C-0393, June 1980.
R. F. Lynch: U.S. Patent No. 4,049,040, issued 20 September 1977.
J. C. Benedyk:Trans. SDCE, 1970, vol. 8, Paper No. 86.
J. C. Benedyk:SME Paper, No. CM71-840, 1971.
O. G. Epanchintsev:Russ. Cast. Prod., January 1972, pp. 34–37.
N. G. Kazumzade and G. D. Novruzov:Russ. Cast. Prod., May 1972, pp. 188–89.
S. Chatterjee and A. A. Das:Br. Foundryman, 1972, vol. 65, pp. 420–29.
S. Chatterjee and A. A. Das:Br. Foundryman, 1973, vol. 66, pp. 118–24.
S. Oya, Y. Matsuura, and A. Kamio:AFS Cast Met. Res. J., March 1974, pp. 18–20.
K. M. Kulkarni:Foundry M&T, 1974, vol. 102, No. 8, pp. 76–79.
R. F. Lynch, R. P. Olley, and P. C. J. Gallagher:AFS Trans., 1975, vol. 83, pp. 561–68.
R. F. Lynch, R. P. Olley, and P. C. J. Gallagher:AFS Trans., 1975, vol. 83, pp. 569–76.
K. M. Kulkarni, D. Stawarz, and R. B. Miclot:Proc. NAMRC-IV, pp. 58–66, Columbus, 1976.
W. Meyer:Metall., 1976, vol. 30, no. 1, pp. 46–54, also BISITS Translation No BISI 14353, May 1976.
M. Virani, S. Storchheim, and S. Rajagopal:IIT Research Institute, Final Report, No. B6142-23, MIRADCOM Contract No. DAAH01-76-C-1103, May 1978.
S. Rajagopal:Proc. Tri-Service Metals Manufacturing Technology Program Status Review of Molten Metal Solidification Processes, pp. 11–118, Daytona Beach, 1979.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rajagopal, S. Squeeze casting: A review and update. J. Applied Metalworking 1, 3–14 (1981). https://doi.org/10.1007/BF02834341
Issue Date:
DOI: https://doi.org/10.1007/BF02834341