Abstract
The plane problem of three-dimensional stability is solved for a transversely compressed composite material reinforced with ribbons taking into account the inhomogeneous initial state. An approximate solution of the problems is based on the net method. The effect of the ribbon form factor, the ratio between the elastic moduli of the matrix and filler, and Poisson ratio of the filler on the critical deformation of the material is investigated.
Similar content being viewed by others
References
A Discussion on New Materials. Proc. Roy. Soc., Ser. A, Math. Phys. Sci.,282, No. 1388, Publ. Royal Soc., London (1964).
Fibre Composite Materials: Paper presented at a Seminar of the Amer. Soc. for Metals, October 17–18, 1964, Amer. Soc. Metals, Metals Park, Ohio (1965).
Yu. V. Kokhanenko and V. V. Yasinsky, “Numerical study of boundary effects in composites reinforced with rectangular fibers,” Int. Appl. Mech.,32, No. 6, 59–65 (1996).
H. S. Katz, “General concepts of fibrous composite materials,” in: H. S. Katz and V. Milewski (eds.), Handbook of Fillers and Reinforcements for Plastics, Van Nostrand Reinhold, New York (1978).
A. N. Guz, Fundamentals of the Three-Dimensional Theory of Stability of Deformable Bodies, Springer-Verlag Berlin Heiberg, Berlin (1999).
A. N. Guz’, Fracture Mechanics of Composite Materials in Compression [in Russian], Naukova Dumka, Kiev (1990).
A. N. Guz and Dsh. A. Musaev, “Fracture of a unidirectional ribbon composite with an elastoplastic matrix in compression,” Sov. Appl. Mech.,26, No. 5, 3–8 (1990).
A. N. Guz, “On stability of unidirectional fibrous composites,” Int. Appl. Mech.,32, No. 8, 3–13 (1996).
S. T. Gulati, “Ribbon reinforced composites,” in: H. S. Katz and V. Milewski (eds.), Handbook of Fillers and Reinforcements for Plastics, Van Nostrand Reinhold, New York (1978).
Yu. V. Kokhanenko, “On one method of construction of discrete problems of elasticity theory,” Int. Appl. Mech.,29, No. 10, 101–108 (1993).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 1, pp. 77–86, January–February, 2000.
Rights and permissions
About this article
Cite this article
Guz’, A.N., Decret, V.A. & Kokhanenko, Y.V. Plane problems of stability of composite materials with a finite-size filler. Mech Compos Mater 36, 49–54 (2000). https://doi.org/10.1007/BF02681776
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02681776