Abstract
Experiments on the determination of the dynamic yield point of AD-1 aluminum upon shockless loading by the method of principal stresses are reported. The results indicate the increase in the yield point upon shockless loading compared to shock loading
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Yu. V. Bat'kov, S. A. Novikov, L. M. Sinitsyna, et al., “Study of shear stresses in metals in the shock wavefront,”Probl. Prochn., No. 5, 56–59 (1981).
Yu. V. Bat'kov, B. L. Glushak, and S. A. Novikov, “Strength of aluminum, copper and steel behind the SW front,”Fiz. Goreniya Vzryva,25, No. 5, 126–132 (1989).
L. V. Al'tshuler, M. I. Brazhnik, and G. s. Telegin, “Strength and elasticity of iron and copper at high pressures of shock compression,”Zh. Prikl. Mekh. Tekh. Fiz., No.6, 159–167 (1971).
Yu. V. Bat'kov, A. B. Glushak, B. L. Glushak, et al., “Study of the strain state of shock-compressed solids by the method of principal stresses,”Fiz. Goreniya Vzryva,31, No. 5, 114–120 (1995).
S. A. Novikov and L. M. Sinitsyna, “Effect of the shock-compression pressure on the values of critical shear stresses,”Zh. Prikl. Mekh. Tekh. Fiz., No 6, 107–110 (1970).
G. Morris, J. Fritz, and B. Hollian, “Quasi-elastic high-pressure waves in Al-2024 and copper,” in:Shock Waves in Condensed Matter, New York (1982).
M. N. Pavlovskii, V. S. Stepanyuk, and V. V. Komissarov, “Shear strength of lead, tin, copper, aluminum, corundum, and fluoroplastic-4 behind the shock wavefront,”Probl. Prochn., No. 10, 50–54 (1991).
P. I. Polukhin, S. S. Gorelik, and V. K. Vorontsov,Physical Fundamentals of Plastic Deformation [in Russian], Metallurgiya, Moscow (1982).
J. R. Asay, “The use of shock-structure methods for evaluating high-pressure material properties,”Impact Eng.,20, 27–61 (1997).
J. L. Moss “Effect of shock waves on the value, rate, and temperature of strains in isentropic bands of shear,” in: Épshtein (ed.),Shock Waves and Phenomena of High-Speed Strain of Metals [Russian translation], Metallurgiya, Moscow (1984).
S. A. Atroshenko, Yu. I. Meshcheryakov, E. V. Nesterova, et al., “Dynamic recrystallization in localized shear bands initiated by shock loading,”Fiz. Met. Metalloved.,75, No. 4, 136–150 (1993).
M. A. Mogilevskii, S. A. Bordzilovskii, and N. N. Gorshkov, “Influence of the front width upon quasiisentropic compression on strengthening of several metals,”Fiz. Goreniya Vzryva,14, No. 6, 110–114 (1978).
G. A. Adadurov and V. I. Gol'danskii, “Reaching low-temperature states of condensed substances upon dynamic compression,” in: A. P. Aleksandrov (ed.),Problems of Modern Experimental and Theoretical Physics [in Russian], Nauka, Leningrad (1984).
P. A. Yampol'skii, “Isentropic compression by shock waves,”Vestn. Akad. Nauk SSSR, No.4, 42–50 (1975).
F. A. Baum, L. P. Orlenko, K. P. Stanyukovich, V. P. Chelyshev, and B. I. Shekhter,Physics of Explosion [in Russian], Nauka, Moscow (1975).
V. N. Zubarev and A. A. Evstigneev, “Equations of state of the explosion products of condensed explosives,”Fiz. Goreniya Vzryva,20, No. 6, 114–126 (1984).
Author information
Authors and Affiliations
Additional information
Translated fromFizika Goreniya i Vzryva, Vol. 35, No. 6, pp. 115–118, November–December 1999
Rights and permissions
About this article
Cite this article
Bat'kov, Y.V., Knyazev, V.N., Novikov, S.A. et al. Shear strength of aluminum upon shockless compression. Combust Explos Shock Waves 35, 707–710 (1999). https://doi.org/10.1007/BF02674547
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02674547