Abstract
Long-term exposure at 600 °C of the near-alpha titanium alloy Ti-6Al-2.75Sn-4Zr-0.4Mo-0.45Si (TIMETAL 1100) influences tensile properties and fracture morphology due to microstructural changes by aging as well as environmentally induced effects. The influences of aging and oxygen penetration on the subsurface of the alloy were evaluated individually. Metallographic investigations, microhardness measurements, and Auger electron spectroscopy (AES) were performed to examine the oxygen-affected zone. Whereas ultimate tensile stress (UTS) and 0.2 pct yield stress (YS) are mainly influenced by aging at 600 °C up to 1000 hours in bimodal and lamellar microstructures, ductility sensitivity depends on oxygen embrittlement of the subsurface zone. Hereafter, little strain cracks are initiated which rapidly penetrate into the unaffected material. Fracture morphology which was investigated by scanning electron microscopy changes little during exposure. Ductile fracture exhibiting honeycomb morphology was observed on bimodal microstructure and interlamellar fracture with little ductile portion on lamellar microstructure. The oxygen-penetrated zone fails by brittle fracture.
Similar content being viewed by others
References
M. Peters, W.A. Kaysser, and Y.T. Lee:Proc. Int. Symp. Light Materials for Transportation Systems, N.J. Kim, ed., Pohang University of Science and Technology, Pohang, Korea, 1993, pp. 459- 67.
P.J. Bania:6th World Conf. on Titanium, Proc. Conf. Les Editions de Physique, Les Ulis Cedex, France, 1988, vol. 2, pp. 825–30.
A. Madsen and H. Ghonem:Mater. Sci. Eng., 1994, vol. 177A, pp. 63–73.
C. Ramachandra and V. Singh:Metall. Trans. A, 1985, vol. 16A, pp. 227–31.
A. Madsen, E. Andrieu, and H. Ghonem:Mater. Sci. Eng., 1993, vol. 171A, pp. 191–97.
A.P. Woodfield, P.J. Postans, M.H. Loretto, and R.E. Smallman:Acta Metall., 1988, vol. 36, pp. 507–15.
G. Sridhar and D.S. Sarma:Metall. Trans. A, 1988, vol. 19A, pp. 3025–33.
C. Ramachandra, A.K. Singh, and G.M.K. Sarma:Metall. Trans. A, 1993, vol. 24A, pp. 1273–80.
M. Peters:Metall., 1983, vol. 6, pp. 584–88.
D.F. Neal and S.P. Fox:Titanium 92, Science and Technology, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 287–94.
D. Banerjee, J.E. Allison, F.H. Froes, J.C. Williams:Titanium Science and Technology, G. Lütjering, U. Zwicker, and W. Bunk, eds., DGM, Oberursel, Germany, 1985, vol. 3, pp. 1519–27.
M. Peters and H. Buhl:Advanced Aerospace Materials, 1st ed., H. Buhl, ed., Springer, Berlin 1992, pp. 58–72.
H.M. Flower, P.R. Swann, R.F. West:Metall. Trans., 1971, vol. 2, pp. 3289–97.
W.T. Donion, J.E. Allison, and J.V. Lasecki:Titanium 92, Science and Technology, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 295–302.
C. Leyens, M. Peters and W.A. Kaysser: Proc. 4th European Conference on Advanced Materials and Processes, EUROMAT '95, Padua/Venice, Italy, 1995.
Z. Liu and G. Welsch:Metall. Trans. A, 1988, vol. 19A, pp. 527–42.
G. Welsch and A.I. Kahveci:Oxidation of High-Temperature Intermetallics, Proc. Workshop, T. Grobstein and J. Doychak, eds., TMS, Warrendale, PA, 1989, pp. 207–18.
A. Styczynski, L. Wagner, C. Müller, and H.E. Exner:Microstructure/Property Relationship of Titanium Alloys, S. Aukem and J.A. Hall, eds., TMS-AIME, Warrendale, PA, 1994, pp. 83–90.
D. Weinem, J. Kumpfert, M. Peters and W.A. Kaysser: Proc. 8th World Conference on Titanium, Birmingham, UK, 1995.
Z. Liu and G. Welsch:Metall. Trans. A, 1988, vol. 19A, pp. 1121–25.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Leyens, C., Peters, M., Weinem, D. et al. Influence of long-term annealing on tensile properties and fracture of near-α titanium alloy Ti-6Al-2.75Sn-4Zr-0.4Mo-0.45Si. Metall Mater Trans A 27, 1709–1717 (1996). https://doi.org/10.1007/BF02649829
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02649829