Abstract
The age-hardening precipitation reactions in aluminum matrix composites reinforced with discontinuous SiC were studied using a calorimetric technique. Composites fabricated with 2124, 2219, 6061, and 7475 alloy matrices were obtained from commercial sources along with unreinforced control materials fabricated in a similar manner. The 7475 materials were made by a casting process while the others were made by powder metallurgy: the SiC reinforcement was in the form of whiskers or particulate. It was found that the overall age-hardening sequence of the alloy was not changed by the addition of SiC, but that the volume fractions of various phases and the precipitation kinetics were substantially modified. Precipitation and dissolution kinetics were generally accelerated. A substantial portion of this acceleration was found to be due to the powder metallurgy process employed to make the composites, but the formation kinetics of some particular precipitate phases were also strongly affected by the presence of SiC. It was observed that the volume fraction of GP zones able to form in the SiC containing materials was significantly reduced. The presence of SiC particles also caused normally quench insensitive materials such as 6061 to become quench sensitive. The microstructural origins of these effects are discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. P. Divecha, S.G. Fishman, and S.D. Karmarker:Journal of Metals, 1981, vol. 33, pp. 12–17.
P. J. Lare and A. P. Divecha: U.S. Patent 3,833,697, Sept. 1974.
Durai Aluminum Composites Corporation, 10326 Roselle St., San Diego, CA 92121.
R.J. Arsenault:Proc. Japan-U.S. CCM-III, K. Katawa, S. Umekawa, and A. K. Kobayashi, eds., Tokyo, 1986, pp. 521-27.
Aluminum Standards and Data 1978 Metric SI, The Aluminum Association, Washington, DC 20006, p. 32.
T. G. Nieh and R. F. Karlak:Scripta Metall., 1984, vol. 18, pp. 25–28.
S.R. Nutt and R. W. Carpenter:Mater. Sci. Eng., 1985, vol. 75, pp. 179–77.
S.R. Nutt: in “Interfaces in Metal-Matrix Composites,” A.K. Dhingra and S.G. Fishman, eds., TMS-AIME, Warrendale, PA, 1986, pp. 157–67.
R.J. Arsenault and R. M. Fisher:Scripta Metall., 1983, vol. 17, pp. 67–71.
Mary Vogelsang, R.J. Arsenault, and R. M. Fisher:Metall. Trans. A, 1986, vol. 17A, pp. 379–89.
R. J. Arsenault and N. Shi:Mater. Sci. Eng., 1986, vol. 81, pp. 175–87.
M. Taya and T. Mori:Acta Metall., 1987, vol. 35, pp. 155–62.
Y. Flom and.R.J. Arsenault:Mater. Sci. Eng., 1985, vol. 75, pp. 151–67.
R.J. Arsenault:Mater. Sci. Eng., 1984, vol. 64, pp. 171–81.
R.J. Arsenault and M. Taya:Acta Metall., 1987, vol. 35, pp. 651–59.
J. England and I.W. Hall:Scripta Metall., 1986, vol. 20, pp. 697- 700.
C.P. You, A.W. Thompson, and I.M. Bernstein:Scripta Metall., 1987, vol. 21, pp. 181–85.
W. D. Rooney: Grumman Corp. Research Center, private communication, 1987.
J.M. Papazian:Metall. Trans. A, 1981, vol. 12A, pp. 269–80.
R.J. Delasi and P. N. Adler:Metall. Trans. A, 1977, vol. 8A, pp. 1177–83.
P.N. Adler and R.J. Delasi:Metall. Trans. A, 1977, vol. 8A, pp. 1185–90.
J.M. Papazian:Metall. Trans. A, 1981, vol. 12A, pp. 269–80.
J.M. Papazian:Metall. Trans. A, 1982, vol. 13A, pp. 761–69.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Papazian, J.M. Effects of SiC whiskers and particles on precipitation in aluminum matrix composites. Metall Trans A 19, 2945–2953 (1988). https://doi.org/10.1007/BF02647721
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647721