References
E. Macherauch:Z. Metallk., 1964, vol. 55, pp. 60–82.
G. Zankl:Z. Naturforsch., 1963, vol. 18a, pp. 795–809.
Ch. Schwink and W. Vorbrugg:Z. Naturforsch, 1967, vol. 22a, pp. 626–42.
Ch. Schwink and D. Knoppik:Phys. Status Solidi, 1965, vol. 8, pp. 729–38.
D. Krause and E. Göttler:Phys. Status Solidi, 1965, vol. 8, pp. 485–98.
U. Essman, M. Rapp, and M. Wilkens:Acta Met, 1968, vol. 16, pp. 1275–87.
O. Vohringer and E. Macherauch:Z. Metallk., 1967, vol. 58, pp. 21–28.
W. B. Morrison:Met. Trans., 1971, vol. 2, pp. 331–32.
Y. Bergström and B. Aronsson:Met. Trans., 1970, vol. 1, pp. 1029–30.
C. Crussard:Rev. Met., Paris, 1953, vol. 10, pp. 697–710.
B. Jaoul:J. Mech Phys. Sol., 1957, vol. 5, pp. 95–114.
V. S. Arunachalam, S. Pattanaik, S. N. Monteiro, and R. E. Reed-Hill:Met. Trans., 1972, vol. 3, pp. 1009–11.
S. N. Monteiro and R. E. Reed-Hill:Met. Trans., 1973, vol. 4, pp. 1011–15.
E. W. Hart and D. Lee: Metallurgy and Ceramics Laboratory, General Electric Research and Development Center, Schenectady, N. Y., private communications.
F. A. McClintock: Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Mass., private communication.
H. W. Swift:J. Mech. Phys. Solids, 1952, vol. 1, pp. 1–18.
U. F. Kocks, H. S. Chen, D. A. Rigney, and R. J. Schaefer: “Work Hardening”, AIME Met. Conf. Series, vol. 46, pp. 151–75, J. P. Hirth and J. Weertman, eds., Gordon and Breach, Science Publishers, New York, 1968.
K. Ono:Met. Trans., 1972, vol. 3, pp. 749–51.
Author information
Authors and Affiliations
Additional information
Formerly Graduate Student at the University of Florida
Rights and permissions
About this article
Cite this article
Reed-Hill, R.E., Cribb, W.R. & Monteiro, S.N. Concerning the analysis of tensile stress-strain data using log dσ/dεp versus log σ diagrams. Metall Trans 4, 2665–2667 (1973). https://doi.org/10.1007/BF02644276
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02644276