Abstract
An exact analysis of the modes II and III problems of a pennyshaped crack in a transversely isotropic piezoelectric medium is performed in this paper. The potential theory method is employed based on the general solution of three-dimensional piezoelasticity and the four harmonics involved are represented by one complex potential. Previous results in potential theory are then utilized to obtain the exact solution that is expressed in terms of elementary functions. Comparison is made between the current results with those published and good agreement is obtained.
Similar content being viewed by others
References
Wang ZK. Penny-shaped crack in transversely isotropic piezoelectric materials.Acta Mechanica Sinica, 1994, 10(1): 49–60
Kogan L, Hui CY, Molkov V. Stress and induction field of a spheroidal inclusion or a pennyshaped crack in a transversely isotropic piezoelectric material.Int J Solid Struct, 1996, 33: 2719–2737
Huang JH. A fracture criterion of a penny-shaped crack in transversely isotropic piezoelectric media.Int J Solid Struct, 1997, 34: 2631–2644
Fabrikant VI. Applications of potential theory in mechanics: a selection of new results. The Netherlands; Kluwer Academic Publishers, 1989
Ding HJ, Chen B, Liang J. General solutions for coupled equations for piezoelectric media.Int J Solid Struct, 1996, 33: 2283–2298
Ding HJ, Chen B, Liang J. On the Green's functions for two-phase transversely isotropic piezoelectric media.Int J Solid Struct, 1997, 34: 3041–3057
Author information
Authors and Affiliations
Additional information
The project supported by the National Natural Science Foundation of China (No. 19872060)
Rights and permissions
About this article
Cite this article
Weiqui, C., Haojiang, D. A penny-shaped crack in a transversely isotropic piezoelectric solid: Modes II and III problems. Acta Mech Sinica 15, 52–58 (1999). https://doi.org/10.1007/BF02487900
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02487900