Summary
Since uncorrected precipitation measurements are used for calculating the evaporation measured by a class A pan, precipitation measurement errors are introduced into the evaporation results. In defining the total error of the evaporation measurement it is necessary to consider the fact that the class A pan orifice and the rain gauge orifice are at different elevations. This paper presents a model to estimate the average value for the total error of evaporation. It is also shown that the evaporation measured by a class A pan is smaller than the actual evaporation by between 5 and 20%.
Similar content being viewed by others
References
Allerup, P., Madsen, H., 1980: Accuracy of point precipitation measurements.Nordic Hydrology 11, 57–70.
Fedorova, E. G., 1966: Calculation of wind speed at the level of the precipitation gauge considering the degree of station protection (in Russian).Trans. Voyeykov Main Geophys. Observ. 195, 63–68.
Mendel, O., 1986: Correction of measured precipitation data and their application in Central and Eastern Europe. Proc. Correction of Prec. Meas. (Zürich, April 1985): 167–174.
Sevruk, B., 1986: Correction of precipitation measurements: Swiss experience. Proc. Correction of Prec. Meas. (Zürich, April 1985): 187–196.
Sevruk, B., (ed.) 1989: Proc. Int. Workshop on Precipitation Measurement (St. Moritz, Dec. 1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bonacci, O. The influence of errors in precipitation measurements on the accuracy of the evaporation measurements performed by a class A evaporation pan. Theor Appl Climatol 43, 181–183 (1991). https://doi.org/10.1007/BF00867453
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00867453