Abstract
The results of investigations of the stress-strained state (SSS) of isotropic cylindrical shells with an elliptical hole are represented in monograph [4]. The modified method of expansion in terms of minor parameter [3] is suggested for calculation of orthotropic shells. The method does not consider, however, lateral shear strains introducing a significant contribution in SSS of composite shells. The procedure for solving problems of SSS calculation near curvilinear holes in shells of arbitrary shape with variable geometrical and physical characteristics is suggested in [1] on the basis of variational-difference method (VDM). Here the relations of the linear theory of anisotropic inhomogeneous shells and the hypothesis of a straight line are taken as the initial ones for all the packet of laminated composite shell as a whole. In the present work we present the numerical results obtained according to the procedure given in [1] for an orthotropic cylindrical shell with an elliptical hole loaded by the axial force and complaint for the lateral shear.
Similar content being viewed by others
References
V. F. Godzula, A. N. Guz', and K. I. Shnerenko, "The problems of statics of nonflat anisotropic shells with holes," Zh. Prikl. Mekh.,24, No. 9, 22–30 (1988).
H. Korn and T. Korn, Handbook on Mathematics for Scientists and Engineers, Nauka, Moscow (1977).
V. P. Revenko, "Calculation of the stressed-strain state of a nonflat orthotropic cylindrical shell with an elliptic hole," Zh. Prikl. Mekh.,24, No. 4, 57–63 (1988).
A. N. Guz', I. S. Chernyshenko, V. N. Chekhov, Vic. N. Chekhov, and K. I. Shnerenko, The Theory of Thin Shells, Weakened by Holes (Methods of Shell Calculation in 5 Vols. Vol. 1) [in Russian], Naukova Dumka, Kiev (1980).
R. S. Tennyson, D. K. Roberts, and D. Zimcik, "Analysis of the stress distribution around unreinforced outputs in circular cylindrical shell under axial compression," N RC, NASA, Ann. Progr. Rept., UTJAS, 118–129 (1968).
Additional information
S. P. Timoshenko Institute of Mechanics, Ukrainian Academy of Sciences, Kiev. Translated from Prikladnaya Mekhanika, Vol. 29, No. 11, pp. 57–62, November, 1993.
Rights and permissions
About this article
Cite this article
Godzula, V.F., Shnerenko, K.I. Stressed state of a composite cylindrical shell with an elliptical hole. Int Appl Mech 29, 925–929 (1993). https://doi.org/10.1007/BF00848276
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00848276