Literature cited
A. E. Bogdanovich and E. V. Yarve, “Numerical analysis of impact deformation of plates made of composite laminates,” Mekh. Kompozitn. Mater, No. 5, 804–820 (1989).
S. H. Yang and C. T. Sun, “Indentation law for composite laminates,” in: Composite Materials: Testing and Design, 6th Conference ASTM STP 787 (1982), pp. 425–449.
T. M. Tan and C. T. Sun, “Wave propagation in graphite/epoxy laminates due to impact,” J. Appl. Mech.,52, 6–12 (1985).
C. T. Sun and J. K. Chen, “On the impact of initially stressed composite laminates,” J. Compos. Mater,19, No. 11, 490–504 (1985).
D. Leicy and P. J. Hogg, “The effect of cryslallinity on the impact properties of advanced thermoplastic composites,” in: Developments in the Science and Technology of Composite Materials (1989), pp. 809–815.
A. L. Dobyns, “The analysis of simply-supported orthotropic plates subject to static and dynamic loads,” in: AIAA/ASME/ASCE/AHS 21st Struct, Struct. Dyn. and Mat. Conf, Seattle, Collection of Technical Papers, Part 1 (1980), pp. 201–209.
Longin B. Greszczuk, “Damage in composite materials due to low velocity impact,” Impact Dynam, 55–94 (1982).
K. T. O'Brien, “Interlaminar fracture of composites,” J. Aero. Soc. India, No. 1, 61–69 (1985).
J. E. Grady and C. T. Sun, “Dynamic delamination crack propagation in a graphite/epoxy laminate,” in: Composite Materials: Fatigue and Fracture, ASTM STP 907 (1986), pp. 5–31.
C. T. Sun and J. E. Grady, “Dynamic delamination fracture toughness of a graphite/epoxy laminate under impact,” Composites Sci. Technol.,31, 55–72 (1988).
S. P. Joshi and C. T. Sun, “Impact induced fracture in laminated composites,” J. Composite Mater., No. 1, 51–66 (1985).
S. P. Joshi and C. T. Sun, “Impact-induced fracture in quasi-isotropic laminates,” J. Composites Technol. Res., No. 2, 40–46 (1987).
M. J. Graves and J. S. Koontz, “Initiation and extent of impact damage in graphite/epoxy and graphite/PEEK composites,” AIAA/ASME/ASCE/AHS 29th Struct., Struct. Dyn. and Mater. Conf, Part 2 (1988), pp. 967–975.
E. F. Dost, L. B. Ilcewicz, and J. H. Gosse, “Sublaminate stability based modelling of impact-damaged composite laminates,” in: Proc. of the American Soc. for Composites, 3rd Technical Conf. Seattle (1988), pp. 354–363.
J. D. Lee, S. Du, and H. Liebowitz, “Three-dimensional finite element and dynamic analysis of composite laminate subjected to impact,” Computers Structures, Nos. 5/6, 807–813 (1984).
H. T. Wu and G. S. Springer, “Impact induced stresses, strains and delaminations in composite plates,” J. Compos. Mater.,22, No. 6, 533–560 (1988).
W. E. Bachrach, “Impact damage in composite laminates,” in: Proc. 4th Japan-U.S. Conf. on Composite Materials, Washington, D. C. (1988), pp. 53–62.
T. Wu. Hsi-Yung and Fu-Kuo-Chang, “Transient dynamic analysis of laminated composite plates subjected to transverse impact,” Computers Structures, No. 3, 453–466 (1989).
H. T. Wu and G. S. Springer, “Measurements of matrix cracking and delamination caused by impact on composite plates,” J. Compos. Mater.,22, No. 6, 518–532 (1988).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 3, pp. 412–420, May–June, 1991.
Rights and permissions
About this article
Cite this article
Bogdanovich, A.E., Yarve, É.V. Analysis of damage zones in graphite-epoxy laminates in low-velocity impact. Mech Compos Mater 27, 270–276 (1991). https://doi.org/10.1007/BF00616874
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00616874