Abstract
The present review begins by briefly tracing history in the early days of development of cast metal-matrix composites and also outlines different casting routes for their synthesis. The problems faced by the quality of cast products and their relation to the process variables and characteristics of a given process, constitute the main theme of the review. The development of microstructure has been discussed in view of nucleation behaviour anticipated on the basis of estimated interface energies. The solidification around dispersoids and in regions away from it has been highlighted. Porosity in cast composites (its origin and control in cast components by suitable mould design) has engaged attention because of damage to mechanical properties due to porosity. The chemical reactions at the interface between dispersoid and matrix during processing of certain important systems of composites, have been described and the means of controlling these reactions have been indicated. The review concludes by drawing attention to the potential for application of cast composites in different industrial components and underlines the necessity of research in certain related fields so that industrial application of cast metal-matrix composites will soon become a reality.
Similar content being viewed by others
References
F. A. BADIA and P. K. ROHATGI, Trans. AFS 79 (1969) 346.
S. RAY, MTech dissertation, Indian Institute of Technology, Kanpur (1969).
R. MAHRABIAN, R. G. RIEK and M. C. FLEMINGS, Metall. Trans., 5 (1974) 1899.
P. R. PRASAD, S. RAY, J. L. GAINDHAR and M. L. KAPOOR, Z. Metallk. 73 (1982) 420.
S. RAY, Ind. J. Technol. Special Issue on Materials, edited by P. Rama Rao, S. Ray and S. Ranganathan 28 (1990) 368.
M. K. AHAJANIAN, J. T. BURKE, D. R. WHITE and A. S. NAGELBERG, SAMPE Quarterly Vol. 34 (1989) p. 817.
L. CHRISTODOULU, P. A. PARRISH and C. R. CROWE, Proc. Symp. Mater. Res. Soc. 120 (1988) 29.
P. CHESNEY, Met. Mater. (1971) 373.
E. A. FEEST, Mater. Design 7 (1986) 58.
T. C. WILLIS Met. Mater. 4 (1988) 485.
R. MUNRO, in “CIMAC Conference”, Oslo, Paper D109 (1985).
T. R. FLETCHER, J. A. CORNIE and K. C. RUSSEL, in “Cast Reinforced Metal Composites” edited by S. G. FISHMAN and A. K. DHINGRA (ASM, Metals Park, OH 1988) p. 21.
P. K. GHOSH and S. RAY, Ind. J. Techol. 26 (1988) 83.
A. MORTENSEN, M. N. GUNGOR, J. A. CORNIE and M. C. FLEMINGS, J. Metals 38 (1986) 30.
J. A. CORNIE, A. MORTENSEN, M. N. GUNGOR and M. C. FLEMINGS, in Proceedings of the Fifth International Conference on Composite Materials”, ICCM V, edited by W. C. Harrigan, J. Strife and A. K. Dhingra (dy1985) p. 809.
A. J. SHALER, Int. J. Powder Metall 1 (1965) 3.
P. B. MAXWELL, G. P. MARTINS, D. L. OLSON and G. R. EDWARDS, Mater. Trans. 21B (1990) 475.
E. J. LAVERNIA, Int. J. Rapid Solid. 5 (1989) 47.
E. L. COURTRIGHT, Tech. Spotlight, Adv. Mater. Proc. 11 (1990) 71.
Kline and Co. Inc., “Metal Matrix Composites 1989”.
P. K. GHOSH, P. R. PRASAD and S. RAY, Z. Metallk. 75 (1984) 370.
P. K. GHOSH and S. RAY, J. Mater. Sci. 21 (1986) 1667.
Idem, ibid. 22 (1987) 4077.
S. RAY, in “ASM Proceedings on Cast Reinforced Metal Composites”, edited by S. G. FISHMAN and A. K. DHINGRA (ASM, Metals Park, Ohio, 1988) p. 77.
P. K. GHOSH and S. RAY, Trans. Jpn Inst. Met. 29 (1988) 502.
J. A. CORNIE, H. MOON and M. C. FLEMINGS, in “Proceedings of the ASM Conference on Fabrication of Reinforced Metal Composites”, Montreal (ASM, Metals Park, Ohio, 1990).
R. E. CLARITY, Progress Casting Group, Internal Report 89-142 (1989) p. 8.
P. K. GHOSH and S. RAY, Trans. AFS 88 (1988) 775.
S. MOHAN, V. AGARWALA and S. RAY, Z. Metallk. 80 (1989) 612.
S. CARON and J. MASOUNAVE, in “ASM Proceedings on Fabrication of Particulates Reinforced Metal Composites”, edited by J. MASOUNAVE and F. G. HAMEL (ASM, Metals Park, Ohio, 1990) p. 107.
E. J. LAVERNIA and N. J. GRANT, Mater. Sci. Eng. 98 (1988) 381.
H. FUKUNAGA, in “ASM Proceedings on Cast Reinforced Metal Composites”, edited by S. G. FISHMAN and A. K. DHINGRA (ASM, Metals Park, Ohio, 1988) p. 101.
N. El KADDAH and K. E. CHANG, Mater. Sci. Eng. A144 (1991) 221.
D. R. UHLMANN, B. CHALMERS and K. A. JACKSON, J. Appl. Phys. 35 (1964) 2986.
S. RAY, P. K. ROHATGI and P. K. KELKER, Ind. Pat. 1243 505A (1972).
P. K. GHOSH and S. RAY, in “Proceedings of the TMS Fall Meeting” Indianapolis, 1989, edited by P. K. ROHATGI (TMS, PA, 1991).
P. K. ROHATGI, R. ASTHANA and S. DAS, Int. Met. Rev. 31 (1986) 115.
L. E. MURR, “Interfacial Phenomen in Metals and Alloys” (Addison-Wesley, MA, 1975).
T. HIKOSAKA, K. MIKI and N. KAWAMOTO, Aichiken Koygo Gijutsu Senta Hokuku 23 (1987) 41.
A. D. MCLEOD, in “ASM Proceedings on Fabrication of Particulates Reinforced Metal Composites”, edited by J. MASOUNAVE and F. G. HAMEL (ASM, Metals Park, Ohio, 1990) p. 17.
J. L. MURRAY, Bull. Alloy Phase Diag. 3 (1982) 60.
K. L. MAMPEL, Z. Phys. Chem. A187 (1940) 43.
Idem, ibid. A187 (1948) 235.
P. K. GHOSH and S. RAY, in “ASM Proceedings on Fabrication of Particulates Reinforced Metal Composites”, edited by J. MASOUNAVE and F. G. HAMEL (ASM, Metals Park, Ohio, 1990) p. 23.
D. J. LLOYD, Compos. Sci. Technol. 35 (1989) 159.
D. J. LLOYD, H. LEGACE, A. MCLEAOD and P. L. MORRIS, Mater. Sci. Eng. A107 (1989) 73.
B. V. REDDI, S. RAY, V. RAGAVAN and A. V. NARLIKAR, Philos. Mag. 38 (1978) 559.
Y. H. TENG and J. D. BOYD, in “ASM Proceedings on Fabrication of Particulates Reinforced Metal Composites”, edited by J. MASOUNAVE and F. G. HAMEL (ASM, Metals Park, Ohio, 1990) p. 125.
B. A. BENDER, T. L. JESSEN and D. LEWIS III, Naval Res. Rev. XLII (1990) 20.
F. AJERSH and M. MADA, Report of CDT Project P1274, Ecole Polytechnique (1989) p. 6.
R. C. COX and S. G. MASON, Am. Rev. Fluid Mech. 3 (1971) 291.
M. E. WOODS and I. M. KRIEGER, J. Colloid Interface Sci. 34 (1970) 91.
F. M. YARANDI, P. K. ROHATGI and S. RAY, in “2nd International Conference on Processing of Semi-Solid Alloys and Composites”, edited by S. B. BROWN and M. C. FLEMINGS (MIT Press MA, 1992) p. 447.
Y. CHAN, C. JANG, P. CAI and L. FAN, Chem. Eng. Sci. 9 (1991) 2253.
G. W. GOVIER and K. AZIZ, “The Flow of Complex Mixtures in Pipes” (Van Nostrand Reinhold, New York, 1992) p. 617.
F. R. MOLLARD, M. C. FLEMINGS and E. F. NIYAMA, Trans. AFS 88 (1988) 647.
F. M. YARANDI, PhD dissertation, University of Wisconsin-Milwaukee (1991) pp. 63, 90.
M. K. SURAPPA and P. K. ROHATGI, Metall. Trans. 12B (1981) 327.
J. A. CORINE, A. MORTENSEN, F. FILED and S. STOKES, in “Proceedings of Innovation in Materials and Applications in the Transportation Industries”, ATA-MAT (1989).
G. F. METZGER, Weld. Res. Council Bull. 207 (1975) 171–191.
B. N. KESHAVRAN, PhD dissertation, University of Kerala, India (1985).
M. EBISAWA, T. HARA, T. HAYASHI and H. USHIO, SAE Technical paper 910835 (1991).
S. RAY, Ind. J. Technol. 28 (1990) 368.
P. K. ROHATGI, R. ASTHANA and S. DAS, Int. Met. Rev. 31 (1986) 115.
A. MORTENSEN, J. A. CORNIE and M. C. FLEMINGS, J. Metals 40 (1988) 12.
P. K. ROHATGI, R. ASTNANA, R. N. YADAV and S. RAY, Met Trans. 21A (1989) 2073.
M. SUERY and L. LAJOYE, Solidification of Metal Matrix Composites, Ed. P. K. Rohatgi, The Min., Met. and Mat. Soc., (1990) 171.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ray, S. Synthesis of cast metal matrix particulate composites. JOURNAL OF MATERIALS SCIENCE 28, 5397–5413 (1993). https://doi.org/10.1007/BF00367809
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00367809