Skip to main content
Log in

Microfiber reinforcement of an arthropod cuticle

Laminated composite material in biology

  • Published:
Zeitschrift für Zellforschung und Mikroskopische Anatomie Aims and scope Submit manuscript

Summary

1. According to its fine structure arthropod cuticle is a laminated composite material. The exoskeleton of a spider is surveyed in an electron microscopical study as to the characteristics of its fiber reinforcement.

2. Five types of fiber arrangement are distinguished, ranging from unidirectional to continuously rotating fiber orientation and with three types combining elements of both of these extreme cases. The unidirectional type is rare and its occurrence confined to the innermost part of the walking leg endocuticle and to parts of articular membranes. Quite contrary a continuous and regular rotation of fiber direction is common. In hard cuticle (exocuticle) this type of reinforcement is found exclusively.

3. Lamellar width, indicating a 180° rotation of the fiber direction, varies within wide limits. Variation is due to varying numbers of fiber layers and the amount of directional change between them (ca. 0.6–24°, type E).

4. The diameter of the chitin/protein microfiber amounts to ca. 35 Å. Its length measured up to 1,5 μm in the preparations. A periodicity of ca. 80 Å is noted. The precision of fiber alignment within the cuticle is high.

5. In the cuticle of the opisthosoma and the articular membranes endocuticular lamellae are taking a wavy course, which is interpreted to be in relation to the cuticle's softness.

6. The mechanical implications of both an increasing number of fiber directions in a composite material and of the different types of fiber reinforcement found in the spider cuticle are demonstrated by a calculation of the directional properties of the moduli of elasticity in tension and shear. The predictable strong influence of both the fiber content and the binder material's E-modulus on the mechanical properties of cuticle is illustrated.

7. Instead of a trajectorial design a continuous rotation of the fiber orientation is found in all exocuticles. Thus the spider does not make use of the special advantage (high strength/weight ratio) of unidirectional fiber arrangement in places where it seemed most likely.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Ashton, J.E., Halpin, J.C., Petit, P.H.: Primer on composite materials: analysis. Stamford: Technomic Publ. Co. 1969

    Google Scholar 

  • Barth, F.G.: Die Feinstruktur des Spinneninteguments. I. Die Cuticula des Laufbeins adulter häutungsferner Tiere (Cupiennius salei Keys.). Z. Zellforsch. 97, 137–159 (1969)

    Google Scholar 

  • Barth, F.G.: Die Feinstruktur des Spinneninteguments. II. Die räumliche Anordnung der Mikrofasern in der lamellierten Cuticula und ihre Beziehung zur Gestalt der Porenkanäle (Cupiennius salei Keys., adult, häutungsfern, Tarsus). Z. Zellforsch. 104, 87–106 (1970)

    Google Scholar 

  • Barth, F.G.: Die Physiologie der Spaltsinnesorgane. II. Funktionelle Morphologie eines Mechanoreceptors. J. comp. Physiol. 81, 159–186 (1972)

    Google Scholar 

  • Bouligand, Y.: Sur une architecture torsadée répandue dans de nombreuses cuticles d'arthropodes. C. R. Acad. Sci. (Paris) 261, 3665–3668 (1965)

    Google Scholar 

  • Bouligand, Y.: Sur une disposition fibrillaire torsadée commune à plusieurs structures biologiques. C. R. Acad. Sci. (Paris) 261, 4864–4867 (1965)

    Google Scholar 

  • Carlström, D.: The crystal structure of α-chitin. J. biophys. biochem. Cytol. 3, 669–683 (1957)

    Google Scholar 

  • Chetverikov, S.S.: The fundamental factor of insect evolution. The Smith. Inst. Ann. Rept. 441–449 (1918)

  • Currey, J.D.: The failure of exoskeletons and endoskeletons. J. Morph. 123, 1–16 (1967)

    Google Scholar 

  • Gardner, K.H., Blackwell, J.: The substructure of the cellulose microfibrils from the cell walls of the algae Valonia ventricosa. J. Ultrastruct. Res. 36, 725–731 (1971)

    Google Scholar 

  • Gordon, J.E.: The new science of strong materials. Baltimore: Penguin Books Inc. 1968

    Google Scholar 

  • Hackman, R.H.: Chemistry of the insect cuticle. In: The physiology of insecta (M. Rockstein, ed.), vol. 3, p. 471–502. New York: Academic Press Inc. 1964

    Google Scholar 

  • Holliday, L. (ed.): Composite materials. Amsterdam-London-New York: Elsevier Publ. Co. 1966

    Google Scholar 

  • Homann, H.: Die Augen der Araneae. Anatomie, Ontogenie und Bedeutung für die Systematik (Chelicerata, Arachnida). Z. Morph. Tiere 69, 201–272 (1971)

    Google Scholar 

  • Hottinger-Baldwin-Meßtechnik: Meßtechnische Briefe. Darmstadt 1971

  • Jensen, M., Weis-Fogh, T.: Biology and physics of locust flight: V. Strength and elasticity of locust cuticle. Phil. Trans. B 245, 137–169 (1962)

    Google Scholar 

  • Kelly, A.: The nature of composite materials. In: Materials. San Francisco: W.H. Freeman and Co. 1967

    Google Scholar 

  • Kennedy, C.H.: The exoskeleton as a factor in limiting and directing the evolution of insects. J. Morph. and Physiol. 44, 267–312 (1927)

    Google Scholar 

  • Krenchel, H.: Fiber reinforcement. Copenhagen: Akademisk Forlag 1964

    Google Scholar 

  • Locke, M.: The cuticle and wax secretion in Calpodes ethlius (Lepidoptera, Hesperidae). Quart. J. micr. Sci. 101, 333–338 (1960)

    Google Scholar 

  • Locke, M.: The structure and formation of the integument in insects. In: The physiology of insects (M. Rockstein, ed.), vol. 3, p. 379–470. New York: Academic Press Inc. 1964

    Google Scholar 

  • Menges, G.: Werkstoffkunde der Kunststoffe. Sammlung Göschen. Bd. 3002. Berlin: Walter de Gruyter and Co. 1970

    Google Scholar 

  • Mönch, E.: Technische Mechanik. München-Wien: R. Oldenbourg 1971

    Google Scholar 

  • Neville, A.C. (ed.): Insect ultrastructure. Oxford-Edinburgh: Blackwell Scientific Publications 1970

    Google Scholar 

  • Neville, A.C., Luke, B.M.: Molecular architecture of adult locust cuticle at the electron microscope level. Tissue and Cell 1, 355–366 (1969)

    Google Scholar 

  • Och, F.: Einführung in die Berechnungsmethoden für Konstruktionen aus faserverstärktem Kunststoff. Vortrag auf dem Lehrgang „Konstruieren mit GFK“ an der Technischen Akademie Esslingen. Manuskript (1972)

  • Peters, W.: Elektronenmikroskopische Untersuchungen an chitinhaltigen Strukturen. Verh. Dtsch. Zool. Ges. Heidelberg 1967. Zool. Anz. Suppl. 31, 681–695 (1968)

  • Peters, W.: Vergleichende Untersuchungen der Feinstruktur peritrophischer Membranen von Insekten. Z. Morph. Tiere 64, 21–58 (1969)

    Google Scholar 

  • Peterson, R.E.: Stress concentration design factors. New York: John Wiley & Sons Inc. 1966

    Google Scholar 

  • Reynolds, E.: The use of lead citrate at high pH as an electron-opaque stain in electron microscopy. J. Cell Biol. 17, 208–212 (1963)

    Google Scholar 

  • Richards, A.G.: Sclerotization and the localization of brown and black colors in insects. Zool. Jb. Abt. Anat. u. Ontog. 84, 25–62 (1967)

    Google Scholar 

  • Richards, A.G., Korda, F.H.: Studies on arthropod cuticle. II. Electron microscope studies of extracted cuticle. Biol. Bull. 94, 212–235 (1948)

    Google Scholar 

  • Romeis, B.: Mikroskopische Technik. München: R. Oldenbourg 1968

    Google Scholar 

  • Rudall, K.M.: The chitin/protein complexes of insect cuticles. In: Advances in insect physiology, vol. 1, p. 257–314. London-New York: Academic Press 1963

    Google Scholar 

  • Timoshenko, S.P., Goodier, J.N.: Theory of elasticity. New York: McGraw-Hill Book Co. 1970

    Google Scholar 

  • Wendt, F.W., Liebowitz, H., Perrone, N.: Mechanics of composite materials. Oxford-New York-Toronto-Sydney-Braunschweig: Pergamon Press 1967

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

Many thanks are due to Ms. H. Tscharntke for expert assistance with electron microscopy and photographic work. Dipl.-Ing. F. Och and Dr. G. Haberl (Messerschmitt-Bölkow-Blohm GmbH, Ottobrunn) provided the calculations for Figs. 14 and 15. Their generous help is gratefully acknowledged. Dr. K. Frahm (Universität München, Fakultät f. Tiermedizin) kindly shared his densitometer. Ms. F. Althaus carefully carried out the drawings.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Barth, F.G. Microfiber reinforcement of an arthropod cuticle. Z.Zellforsch 144, 409–433 (1973). https://doi.org/10.1007/BF00307585

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00307585

Key words

Navigation