Abstract
Hemicellulose is the second most prevalent, renewable, non-toxic, and biodegradable hetero-polysaccharide after cellulose in plants consisting of different saccharide units. Hemicellulose’s versatile physical and chemical properties make it a promising source for applications in pharmaceutical and biomedicine fields. Hemicellulose and derivatives find wide pharmaceutical applications in the preparation of hydrogels, microspheres, films, nanocomposites, microgels, bionanofibers, and so on. Biomedical applications include wound healing and tissue engineering. This chapter explains the fundamental aspects relevant to hemicelluloses, viz. structure, sources, properties, and their biodegradability and/or biocompatibility. The authors also present the potential of stimuli-responsive hemicellulose-based hydrogels for pharmaceutical applications. The major aim of this chapter is to summarize the research-based investigations on fabrication, and applications of hemicellulose-based formulations and their future perspectives.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahmad N, Tayyeb D, Ali I, Alruwaili NK, Ahmad W, Ur Rehman A, Khan AH, Iqbal MS (2020) Development and characterization of hemicellulose-based films for antibacterial wound-dressing application. Polymers 12(3):548. https://doi.org/10.3390/polym12030548
Akbar J, Iqbal MS, Chaudhary MT, Yasin T, Massey S (2012a) A QSPR study of drug release from an arabinoxylan using ab initio optimization and neural networks. Carbohydr Polym 88(4):1348–1357. https://doi.org/10.1016/j.carbpol.2012.02.016
Akbar J, Iqbal MS, Massey S, Masih R (2012b) Kinetics and mechanism of thermal degradation of pentose- and hexose-based carbohydrate polymers. Carbohydr Polym 90(3):1386–1393. https://doi.org/10.1016/j.carbpol.2012.07.008
Alakpa EV, Jayawarna V, Lampel A, Burgess KV, West CC, Bakker SCJ, Roy S, Javid N, Fleming S, Lamprou DA, Yang J, Miller A, Urquhart AJ, Frederix PWJM, Hunt NT, Péault B, Ulijn RV, Dalby MJ (2016) Tunable supramolecular hydrogels for selection of lineage-guiding metabolites in stem cell cultures. Chem 1(2):298–319. https://doi.org/10.1016/j.chempr.2016.07.001
Alavi T, Rezvanian M, Ahmad N, Mohamad N, Ng SF (2019) Pluronic-F127 composite film loaded with erythromycin for wound application: formulation, physicomechanical and in vitro evaluations. Drug Deliv Transl Res 9(2):508–519. https://doi.org/10.1007/s13346-017-0450-z
Alexandrescu L, Syverud K, Gatti A, Chinga-Carrasco G (2013) Cytotoxicity tests of cellulose nanofibril-based structures. Cellulose 20(4):1765–1775. https://doi.org/10.1007/s10570-013-9948-9
Amin M, Iram F, Iqbal MS, Saeed MZ, Raza M, Alam S (2013) Arabinoxylan-mediated synthesis of gold and silver nanoparticles having exceptional high stability. Carbohydr Polym 92(2):1896–1900. https://doi.org/10.1016/j.carbpol.2012.11.056
Amsden B (1998) Solute diffusion within hydrogels. Mechanisms and models. Macromolecules 31:8382. https://doi.org/10.1021/ma980765f
Annabi N, Tamayol A, Uquillas JA, Akbari M, Bertassoni LE, Cha C, Camci-Unal G, Dokmeci MR, Peppas NA, Khademhosseini A (2014) 25th anniversary article: rational design and applications of hydrogels in regenerative medicine. Adv Mater 26:85
Annabi N, Shin SR, Tamayol A, Miscuglio M, Bakooshli MA, Assmann A, Mostafalu P, Sun JY, Mithieux S, Cheung L, Tang X, Weiss AS, Khademhosseini A (2016) Highly elastic and conductive human-based protein hybrid hydrogels. Adv Mater 28(1):40–49. https://doi.org/10.1002/adma.201503255
Anseth KS, Bowman CN, Brannon-Peppas L (1996) Mechanical properties of hydrogels and their experimental determination. Biomaterials 17(17):1647–1657. https://doi.org/10.1016/0142-9612(96)87644-7
Anseth KS, Metters AT, Bryant SJ, Martens PJ, Elisseeff JH, Bowman CN (2002) In situ forming degradable networks and their application in tissue engineering and drug delivery. J Control Release 78(1–3):199–209. https://doi.org/10.1016/S0168-3659(01)00500-4
Bajpai AK, Shukla SK, Bhanu S, Kankane S (2008) Responsive polymers in controlled drug delivery. Prog Polym Sci 33(11):1088–1118. https://doi.org/10.1016/j.progpolymsci.2008.07.005
Balakrishnan B, Banerjee R (2011) Biopolymer-based hydrogels for cartilage tissue engineering. Chem Rev 111(8):4453–4474. https://doi.org/10.1021/cr100123h
Banerjee A, Arha M, Choudhary S, Ashton RS, Bhatia SR, Schaffer DV, Kane RS (2009) The influence of hydrogel modulus on the proliferation and differentiation of encapsulated neural stem cells. Biomaterials 30(27):4695–4699. https://doi.org/10.1016/j.biomaterials.2009.05.050
Banerjee I, Mishra D, Das T, Maiti TK (2012) Wound pH-responsive sustained release of therapeutics from a poly(NIPAAm-co-AAc) hydrogel. J Biomater Sci Polym Ed 23(1–4):111–132. https://doi.org/10.1163/092050610X545049
Bayer EA, Jordan J, Roy A, Gottardi R, Fedorchak MV, Kumta PN, Little SR (2017) * Programmed platelet-derived growth factor-BB and bone morphogenetic protein-2 delivery from a hybrid calcium phosphate/alginate scaffold. Tissue Eng A 23(23–24):1382–1393
Belgacem MN, Gandini A (2008) Monomers, polymers and composites from renewable resources. Elsevier Ltd., Amsterdam. https://doi.org/10.1016/B978-0-08-045316-3.X0001-4
Belmokaddem F-Z, Pinel C, Huber P, Petit-Conil M, Da Silva Perez D (2011) Green synthesis of xylan hemicellulose esters. Carbohydr Res 346(18):2896–2904. https://doi.org/10.1016/j.carres.2011.10.012
Bendy RH, Nuccio PA, Wolfe E, Collins B, Tamburro C, Glass W, Martin CM (1964) Relationship of quantitative wound bacterial counts to healing of decubiti: effect of topical Gentamycin. Antimicrob Agents Chemother 10:147–155. https://europepmc.org/article/med/14287920
Bennett S, Melanson D, Torchiana D, Wiseman D, Sawhney A (2003) Next-generation hydrogel films as tissue sealants and adhesion barriers. J Card Surg 18
Benoit DSW, Schwartz MP, Durney AR, Anseth KS (2008) Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells. Nat Mater 7(10):816–823. https://doi.org/10.1038/nmat2269
Betre H, Setton LA, Meyer DE, Chilkoti A (2002) Characterization of a genetically engineered elastin-like polypeptide for cartilaginous tissue repair. Biomacromolecules 3(5):910–916. https://doi.org/10.1021/bm0255037
Bhatia M, Ahuja M (2015) Psyllium arabinoxylan: carboxymethylation, characterization and evaluation for nanoparticulate drug delivery. Int J Biol Macromol 72:495–501. https://doi.org/10.1016/j.ijbiomac.2014.08.051
Bhattacharya M et al (2012) Nanofibrillar cellulose hydrogel promotes three-dimensional liver cell culture. J Control Release 164:291–298. https://doi.org/10.1016/j.jconrel.2012.06.039
Bidarra SJ, Barrias CC, Granja PL (2014) Injectable alginate hydrogels for cell delivery in tissue engineering. Acta Biomater 10(4):1646–1662. https://doi.org/10.1016/j.actbio.2013.12.006. Epub 2013 Dec 12
Boateng JS, Matthews KH, Stevens HNE, Eccleston GM (2008) Wound healing dressings and drug delivery systems: a review. J Pharm Sci 97(8):2892–2923. https://doi.org/10.1002/jps.21210
Boateng JS, Pawar HV, Tetteh J (2013) Polyox and carrageenan based composite film dressing containing anti-microbial and anti-inflammatory drugs for effective wound healing. Int J Pharm 441(1–2):181–191. https://doi.org/10.1016/j.ijpharm.2012.11.045
Bonilla MR, Lopez-Sanchez P, Gidley MJ, Stokes JR (2016) Micromechanical model of biphasic biomaterials with internal adhesion: application to nanocellulose hydrogel composites. Acta Biomater 29:149–160. https://doi.org/10.1016/j.actbio.2015.10.032
Bowler PG, Duerden BI, Armstrong DG (2001) Wound microbiology and associated approaches to wound management. Clin Microbiol Rev 14(2):244–269. https://doi.org/10.1128/CMR.14.2.244-269.2001
Bryant SJ, Anseth KS (2002) Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels. J Biomed Mater Res 59(1):63–72. https://doi.org/10.1002/jbm.1217
Bryant SJ, Anseth KS (2003) Controlling the spatial distribution of ECM components in degradable PEG hydrogels for tissue engineering cartilage. J Biomed Mater Res A 64(1):70–79. https://doi.org/10.1002/jbm.a.10319
Bryant SJ, Anseth KS, Lee DA, Bader DL (2004) Crosslinking density influences the morphology of chondrocytes photoencapsulated in PEG hydrogels during the application of compressive strain. J Orthop Res 22(5):1143–1149. https://doi.org/10.1016/j.orthres.2004.02.001
Bryant SJ, Cuy JL, Hauch KD, Ratner BD (2007) Photo-patterning of porous hydrogels for tissue engineering. Biomaterials 28(19):2978–2986. https://doi.org/10.1016/j.biomaterials.2006.11.033
Bush JR, Liang H, Dickinson M, Botchwey EA (2016) Xylan hemicellulose improves chitosan hydrogel for bone tissue regeneration. Polym Adv Technol 27(8):1050–1055. https://doi.org/10.1002/pat.3767
Canal T, Peppas NA (1989) Correlation between mesh size and equilibrium degree of swelling of polymeric networks. J Biomed Mater Res 23(10):1183–1193. https://doi.org/10.1002/jbm.820231007
Cao X, Peng X, Zhong L, Sun R (2014) Multiresponsive hydrogels based on xylan-type hemicelluloses and photoisomerized azobenzene copolymer as drug delivery carrier. J Agric Food Chem 62(41):10000–10007. https://doi.org/10.1021/jf504040s
Chatterjee S, Hui P, Kan C (2018) Thermoresponsive hydrogels and their biomedical applications: special insight into their applications in textile based transdermal therapy. Polymers 10(5):480. https://doi.org/10.3390/polym10050480
Chaudhuri O, Gu L, Klumpers D, Darnell M, Bencherif SA, Weaver JC, Huebsch N, Lee HP, Lippens E, Duda GN, Mooney DJ (2016) Hydrogels with tunable stress relaxation regulate stem cell fate and activity. Nat Mater 15(3):326–334. https://doi.org/10.1038/nmat4489
Chen GG, Hu YJ, Peng F, Bian J, Li MF, Yao CL, Sun RC (2018) Fabrication of strong nanocomposite films with renewable forestry waste/montmorillonite/reduction of graphene oxide for fire retardant. Chem Eng J 337(December 2017):436–445. https://doi.org/10.1016/j.cej.2017.12.119
Cherubini F (2010) The biorefinery concept: using biomass instead of oil for producing energy and chemicals. Energy Convers Manag 51(7):1412–1421
Chinga-Carrasco G, Syverud K (2014) Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels. J Biomater Appl 29:423–432. https://doi.org/10.1177/0885328214531511
Choi OS, Yuk SH, Lee HB, Jhon MS (1994) Electric-field-sensitive polymers: reversible bending of rod-shaped polymer gels in salt solutions. J Appl Polym Sci 51(2):375–379. https://doi.org/10.1002/app.1994.070510220
Ciolacu DE, Darie RN (2016) Nanocomposites based on cellulose, hemicelluloses, and lignin. In: Nanomaterials and nanocomposites, pp 391–424. https://doi.org/10.1002/9783527683772.ch11
Coletta DJ, IbĂ¡Ă±ez-Fonseca A, Missana LR, Jammal MV, Vitelli EJ, Aimone M, Zabalza F, Issa JPM, Alonso M, RodrĂguez-Cabello JC, Feldman S (2017) * Bone regeneration mediated by a bioactive and biodegradable extracellular matrix-like hydrogel based on elastin-like recombinamers. Tissue Eng Part A 23(23–24):1361–1371. https://doi.org/10.1089/ten.TEA.2017.0047. Epub 2017 Aug 22
Coviello T, Matricardi P, Marianecci C, Alhaique F (2007) Polysaccharide hydrogels for modified release formulations. J Control Release 119(1):5–24. https://doi.org/10.1016/j.jconrel.2007.01.004
Crippa F, Moore TL, Mortato M, Geers C, Haeni L, Hirt AM, Rothen-Rutishauser B, Petri-Fink A (2017) Dynamic and biocompatible thermo-responsive magnetic hydrogels that respond to an alternating magnetic field. J Magn Magn Mater 427:212–219. https://doi.org/10.1016/j.jmmm.2016.11.023
Cui J, Lackey MA, Madkour AE, Saffer EM, Griffin DM, Bhatia SR, Crosby AJ, Tew GN (2012) Synthetically simple, highly resilient hydrogels. Biomacromolecules 13(3):584–588. https://doi.org/10.1021/bm300015s
Czaja WK, Young DJ, Kawecki M, Brown RM (2007) The future prospects of microbial cellulose in biomedical applications. Biomacromolecules 8(1):1–12. https://doi.org/10.1021/bm060620d
Dekker RFH (1985) Biodegradation of the hemicelluloses. In: Biosynthesis and biodegradation of wood components. https://doi.org/10.13140/2.1.2266.2081
Dhivya S, Padma VV, Santhini E (2015) Wound dressings—A review. Biomedicine 5(4):24–28
Drury JL, Mooney DJ (2003) Hydrogels for tissue engineering: scaffold design variables and applications. Biomaterials 24:4337–4351
Dvir T, Timko BP, Kohane DS, Langer R (2011) Nanotechnological strategies for engineering complex tissues. Nat Nanotechnol 6(1):13–22. https://doi.org/10.1038/nnano.2010.246
EbringerovĂ¡ A (2005) Structural diversity and application potential of hemicelluloses. Macromol Symp 232(333):1–12. https://doi.org/10.1002/masy.200551401
EbringerovĂ¡ A, Thomas H (2005) Hemicellulose. In: Polysaccharides I, pp 1–67
EbringerovĂ¡ A, HromĂ¡dkovĂ¡ Z, Heinze T (2005) Hemicellulose. Adv Polym Sci 186:1–67. https://doi.org/10.1007/b136816
Edahiro J-i, Sumaru K, Tada Y, Ohi K, Takagi T, Kameda M, Shinbo T, Kanamori T, Yoshimi Y (2005) In situ control of cell adhesion using photoresponsive culture surface. Biomacromolecules 6(2):970–974
Edlund U, Albertsson AC (2008) A microspheric system: hemicellulose-based hydrogels. J Bioact Compat Polym 23(2):171–186. https://doi.org/10.1177/0883911507088400
Elisseeff J, McIntosh W, Fu K, Blunk T, Langer R (2001) Controlled-release of IGF-I and TGF-β1 in a photopolymerizing hydrogel for cartilage tissue engineering. J Orthop Res 19(6):1098–1104. https://doi.org/10.1016/S0736-0266(01)00054-7
Erum A, Bashir S, Saghir S, Tulain UR, Saleem U, Nasir M, Kanwal F, Hayat Malik MN (2015) Acute toxicity studies of a novel excipient arabinoxylan isolated from Ispaghula (Plantago ovata) husk. Drug Chem Toxicol 38(3):300–305. https://doi.org/10.3109/01480545.2014.956219
Farhat W, Venditti RA, Hubbe M, Taha M, Becquart F, Ayoub A (2017) A review of water-resistant hemicellulose-based materials: processing and applications. ChemSusChem 10(2):305–323
Farzamfar S, Naseri-Nosar M, Samadian H, Mahakizadeh S, Tajerian R, Rahmati M, Vaez A, Salehi M (2018) Taurine-loaded poly (ε-caprolactone)/gelatin electrospun mat as a potential wound dressing material: in vitro and in vivo evaluation. J Bioact Compat Polym 33(3):282–294. https://doi.org/10.1177/0883911517737103
Fleischer S, Dvir T (2013) Tissue engineering on the nanoscale: lessons from the heart. Curr Opin Biotechnol 24(4):664–671. https://doi.org/10.1016/j.copbio.2012.10.016
Fuhrer R, Athanassiou EK, Luechinger NA, Stark WJ (2009) Crosslinking metal nanoparticles into the polymer backbone of hydrogels enables preparation of soft, magnetic field-driven actuators with muscle-like flexibility. Small 5(3):383–388
Giani G, Fedi S, Barbucci R (2012) Hybrid magnetic hydrogel: a potential system for controlled drug delivery by means of alternating magnetic fields. Polymers 4(2):1157–1169
Gibbs DM, Black CR, Dawson JI, Oreffo RO (2016) A review of hydrogel use in fracture healing and bone regeneration. J Tissue Eng Regen Med 10(3):187–198. https://doi.org/10.1002/term.1968. Epub 2014 Dec 10
Giselbrecht S, Rapp BE, Niemeyer CM (2013) The chemistry of cyborgs - interfacing technical devices with organisms. Angew Chem Int Ed 52(52):13942–13957. https://doi.org/10.1002/anie.201307495
Goldshmid R, Seliktar D (2017) Hydrogel modulus affects proliferation rate and pluripotency of human mesenchymal stem cells grown in three-dimensional culture. ACS Biomater Sci Eng 3(12):3433–3446. https://doi.org/10.1021/acsbiomaterials.7b00266
Guan Y, Zhang B, Bian J, Peng F, Sun RC (2014) Nanoreinforced hemicellulose-based hydrogels prepared by freeze-thaw treatment. Cellulose 21(3):1709–1721. https://doi.org/10.1007/s10570-014-0211-9
Gupta P, Vermani K, Garg S (2002) Hydrogels: from controlled release to pH-responsive drug delivery. Drug Discov Today 7(10):569–579. https://doi.org/10.1016/S1359-6446(02)02255-9
Habraken WJEM, Wolke JGC, Jansen JA (2007) Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering. Adv Drug Deliv Rev 59(4–5):234–248. https://doi.org/10.1016/j.addr.2007.03.011
Han X, Meng X, Wu Z, Wu Z, Qi X (2018) Dynamic imine bond cross-linked self-healing thermosensitive hydrogels for sustained anticancer therapy via intratumoral injection. Mater Sci Eng C 93:1064–1072. https://doi.org/10.1016/j.msec.2018.08.064
Hansen NML, Plackett D (2008) Sustainable films and coatings from hemicelluloses: a review. Biomacromolecules 9(6):1493–1505. https://doi.org/10.1021/bm800053z
Hasan A, Khattab A, Islam MA, Hweij KA, Zeitouny J, Waters R, Sayegh M, Hossain MM, Paul A (2015) Injectable hydrogels for cardiac tissue repair after myocardial infarction. Adv Sci (Weinh) 2(11):1500122. https://doi.org/10.1002/advs.201500122
Hauser AW, Evans AA, Na JH, Hayward RC (2015) Photothermally reprogrammable buckling of nanocomposite gel sheets. Angew Chem Int Ed Engl 54:5434–5437
Hendi A, Hassan MU, Elsherif M, Alqattan B, Park S, Yetisen AK, Butt H (2020) Healthcare applications of pH-sensitive hydrogel-based devices: a review. Int J Nanomedicine 15:3887–3901. https://doi.org/10.2147/IJN.S245743
Hines L, Petersen K, Lum GZ, Sitti M (2017) Soft actuators for small-scale robotics. Adv Mater 29(13):1603483
Hoffman AS (2012) Hydrogels for biomedical applications. Adv Drug Deliv Rev 64:18–23
Hua K, Carlsson DO, Ålander E, Lindström T, Strømme M, Mihranyan A, Ferraz N (2014) Translational study between structure and biological response of nanocellulose from wood and green algae. RSC Adv 4(6):2892–2903. https://doi.org/10.1039/c3ra45553j
Huang H, Qi X, Chen Y, Wu Z (2019a) Thermo-sensitive hydrogels for delivering biotherapeutic molecules: a review. Saudi Pharmaceut J 27(7):990–999. https://doi.org/10.1016/j.jsps.2019.08.001
Huang YC, Huang KY, Lew WZ, Fan KH, Chang WJ, Huang HM (2019b) Gamma-irradiation-prepared low molecular weight hyaluronic acid promotes skin wound healing. Polymers 11(7):1214. https://doi.org/10.3390/polym11071214
Ilg P (2013) Stimuli-responsive hydrogels cross-linked by magnetic nanoparticles. Soft Matter 9(13):3465–3468. https://doi.org/10.1039/c3sm27809c
Iqbal MS, Akbar J, Hussain MA, Saghir S, Sher M (2011) Evaluation of hot-water extracted arabinoxylans from ispaghula seeds as drug carriers. Carbohydr Polym 83(3):1218–1225. https://doi.org/10.1016/j.carbpol.2010.09.024
Ishida K, Uno T, Itoh T, Kubo M (2012) Synthesis and property of temperature-responsive hydrogel with movable cross-linking points. Macromolecules 45(15):6136–6142. https://doi.org/10.1021/ma301065j
Isobe N, Sekine M, Kimura S, Wada M, Kuga S (2011) Anomalous reinforcing effects in cellulose gel-based polymeric nanocomposites. Cellulose 18(2):327–333. https://doi.org/10.1007/s10570-010-9487-6
Jagur-grodzinski J (2010) Polymeric gels and hydrogels for biomedical and pharmaceutical applications. Polym Adv Technol 21:27–47
Jeong B, Kim SW, Bae YH (2012) Thermosensitive sol-gel reversible hydrogels. Adv Drug Deliv Rev 64(Suppl):154–162. https://doi.org/10.1016/j.addr.2012.09.012
Juliano RL (1991) A new perspective for drug delivery research. In: Targeted drug delivery, pp 1–9. https://doi.org/10.1007/978-3-642-75862-1_1
Jung SW, Byun JH, Oh SH, Kim TH, Park JS, Rho GJ, Lee JH (2018) Multivalent ion-based in situ gelling polysaccharide hydrogel as an injectable bone graft. Carbohydr Polym 180:216–225. https://doi.org/10.1016/j.carbpol.2017.10.029. Epub 2017 Oct 7
Kalarickal NC, Rimmer S, Sarker P, Leroux JC (2007) Thiol-functionalized poly(ethylene glycol)-b-polyesters: synthesis and characterization. Macromolecules 40(6):1874–1880. https://doi.org/10.1021/ma062377g
Kamoun EA, Kenawy ERS, Chen X (2017) A review on polymeric hydrogel membranes for wound dressing applications: PVA-based hydrogel dressings. J Adv Res 8(3):217–233. https://doi.org/10.1016/j.jare.2017.01.005
Karaaslan MA, Tshabalala MA, Yelle DJ, Buschle-Diller G (2011) Nanoreinforced biocompatible hydrogels from wood hemicelluloses and cellulose whiskers. Carbohydr Polym 86(1):192–201. https://doi.org/10.1016/j.carbpol.2011.04.030
Khademhosseini A, Vacanti JP, Langer R (2009) Progress in tissue. Sci Am 300(5):64–71. https://doi.org/10.1038/scientificamerican0509-64
Kim SY, Lee YM (1999) Drug release behavior of electrical responsive poly(vinyl alcohol)/poly(acrylic acid) IPN hydrogels under an electric stimulus. J Appl Polym Sci 74(7):1752–1761. https://doi.org/10.1002/(SICI)1097-4628(19991114)74:7<1752::AID-APP18>3.0.CO;2-H
Kim JI, Chun CJ, Kim B, Hong JM, Cho J-K, Lee SH, Song S-C (2012) Thermosensitive/magnetic poly(organophosphazene) hydrogel as a longterm magnetic resonance contrast platform. Biomaterials 33(1):218–224
Kirketerp-Møller K, Zulkowski K, James G (2011) Chronic wound colonization, infection, and biofilms. In: Biofilm infections. Springer, New York, NY, pp 11–24. https://doi.org/10.1007/978-1-4419-6084-9_2
Krekhova M, Lang T, Richter R, Schmalz H (2010) Thermoreversible hydroferrogels with tunable mechanical properties utilizing block copolymer mesophases as template. Langmuir 26(24):19181–19190. https://doi.org/10.1021/la1040823
Kulkarni RV, Biswanath S (2007) Electrically responsive smart hydrogels in drug delivery: a review. J Appl Biomater Biomech 5(3):125–139. https://doi.org/10.1177/228080000700500301
Kumar Singh Yadav H, Shivakumar HG (2012) In vitro and in vivo evaluation of pH-sensitive hydrogels of carboxymethyl chitosan for intestinal delivery of theophylline. ISRN Pharmaceut 2012:1–9. https://doi.org/10.5402/2012/763127
Kwon IC, Bae YH, Kim SW (1991) Electrically erodible poly- mer gel for controlled release of drugs. Nature 354:291–293
Kwon IC, Bae YH, Kim SW (1994) Heparin release from polymer complex. J Control Release 30(2):155–159. https://doi.org/10.1016/0168-3659(94)90262-3
Lanniel M, Huq E, Allen S, Buttery L, Williams PM, Alexander MR (2011) Substrate induced differentiation of human mesenchymal stem cells on hydrogels with modified surface chemistry and controlled modulus. Soft Matter 7(14):6501–6514. https://doi.org/10.1039/c1sm05167a
Li X, Pan X (2010) Hydrogels based on hemicellulose and lignin from lignocellulose biorefinery: a mini-review. J Biobased Mater Bioenergy 4(4):289–297. https://doi.org/10.1166/jbmb.2010.1107
Li F, Li S, Vert M (2005) Synthesis and rheological properties of polylactide/poly(ethylene glycol) multiblock copolymers. Macromol Biosci 5(11):1125–1131. https://doi.org/10.1002/mabi.200500143
Lim HL, Chuang JC, Tran T, Aung A, Arya G, Varghese S (2011) Dynamic electromechanical hydrogel matrices for stem cell culture. Adv Funct Mater 21(1):55–63
Lin CC, Metters AT (2006) Hydrogels in controlled release formulations: network design and mathematical modeling. Adv Drug Deliv Rev 58(12–13):1379–1408. https://doi.org/10.1016/j.addr.2006.09.004
Lin S, Sangaj N, Razafiarison T, Zhang C, Varghese S (2011) Influence of physical properties of biomaterials on cellular behavior. Pharm Res 28:1422. https://doi.org/10.1007/s11095-011-0378-9
Lindblad MS, Sjöberg J, Albertsson A-C, Hartman J (2007) Hydrogels from polysaccharides for biomedical applications. In: Materials, chemicals, and energy from forest biomass, pp 153–167. https://doi.org/10.1021/bk-2007-0954.ch010
Liska R, Schwager F, Maier C, Cano-Vives R, Stampfl J (2005) Water- soluble photopolymers for rapid prototyping of cellular materials. J Appl Polym Sci 97:2286–2298
Liu TY, Hu SH, Liu KH, Liu DM, Chen SY (2006) Preparation and characterization of smart magnetic hydrogels and its use for drug release. J Magn Magn Mater 304(1):e397–e399. https://doi.org/10.1016/j.jmmm.2006.01.203
Liu C, Chen Y, Chen J (2010) Synthesis and characteristics of pH-sensitive semi-interpenetrating polymer network hydrogels based on konjac glucomannan and poly(aspartic acid) for in vitro drug delivery. Carbohydr Polym 79(3):500–506. https://doi.org/10.1016/j.carbpol.2009.08.024
Liu J, Korpinen R, Mikkonen K, Willför S, Xu C (2014) Nanofibrillated cellulose originated from birch sawdust after sequential extractions: a promising polymeric material from waste to films. Cellulose 21:2587–2598. https://doi.org/10.1007/s10570-014-0321-4
Liu J, Willför S, Xu C (2015) A review of bioactive plant polysaccharides: biological activities, functionalization, and biomedical applications. Bioact Carbohydr Diet Fibre 5(1):31–61. https://doi.org/10.1016/j.bcdf.2014.12.001
Liu J, Chinga-Carrasco G, Cheng F et al (2016a) Hemicellulose-reinforced nanocellulose hydrogels for wound healing application. Cellulose 23:3129–3143. https://doi.org/10.1007/s10570-016-1038-3
Liu J et al (2016b) Development of nanocellulose scaffolds with tunable structures to support 3D cell culture. Carbohydr Polym 148:259–271
Lowenthal J, Gerecht S (2016) Stem cell-derived vasculature: a potent and multidimensional technology for basic research, disease modeling, and tissue engineering. Biochem Biophys Res Commun 473:733
Lv H, Li L, Sun M, Zhang Y, Chen L, Rong Y, Li Y (2015) Mechanism of regulation of stem cell differentiation by matrix stiffness. Stem Cell Res Ther 6(1):103. https://doi.org/10.1186/s13287-015-0083-4
Ma JT, Liu LR, Yang XJ, De Yao K (1995) Bending behavior of gelatin/poly(hydroxyethyl methacrylate) IPN hydrogel under electric stimulus. J Appl Polym Sci 56(1):73–77. https://doi.org/10.1002/app.1995.070560110
Martens PJ, Bryant SJ, Anseth KS (2003) Tailoring the degradation of hydrogels formed from multivinyl poly(ethlene glycol) and poly(vinyl alcohol) macromers for cartilage tissue engineering. Biomacromolecules 4(2):283–292. https://doi.org/10.1021/bm025666v
Massey S, Saeed DMI, Wolf B, Mairam I, Rao S (2016) Comparative drug loading and release study on some carbohydrate polymers. J Pharm 35:146
Mathew AP, Uthaman S, Cho KH, Cho CS, Park IK (2018) Injectable hydrogels for delivering biotherapeutic molecules. Int J Biol Macromol 110:17–29. https://doi.org/10.1016/j.ijbiomac.2017.11.113
Mc Gann MJ, Higginbotham CL, Geever LM, Nugent MJD (2009) The synthesis of novel pH-sensitive poly(vinyl alcohol) composite hydrogels using a freeze/thaw process for biomedical applications. Int J Pharm 372(1–2):154–161. https://doi.org/10.1016/j.ijpharm.2009.01.008
Meenach SA, Zach Hilt J, Anderson KW (2010) Poly(ethylene glycol)-based magnetic hydrogel nanocomposites for hyperthermia cancer therapy. Acta Biomater 6(3):1039–1046
Mehrali M, Thakur A, Pennisi CP, Talebian S, Arpanaei A, Nikkhah M, Dolatshahi-Pirouz A (2017) Nanoreinforced hydrogels for tissue engineering: biomaterials that are compatible with load-bearing and electroactive tissues. Adv Mater 29(8). https://doi.org/10.1002/adma.201603612
Memic A, Alhadrami HA, Hussain MA, Aldhahri M, Al Nowaiser F, Al-Hazmi F, Oklu R, Khademhosseini A (2015) Hydrogels 2.0: improved properties with nanomaterial composites for biomedical applications. Biomed Mater 11(1):014104. https://doi.org/10.1088/1748-6041/11/1/014104
Mendes FRS, Bastos MSR, Mendes LG, Silva ARA, Sousa FD, Monteiro-Moreira ACO, Cheng HN, Biswas A, Moreira RA (2017) Preparation and evaluation of hemicellulose films and their blends. Food Hydrocoll 70:181–190. https://doi.org/10.1016/j.foodhyd.2017.03.037
Mertaniemi H et al (2016) Human stem cell decorated nanocellulose threads for biomedical applications. Biomaterials 82:208–220. https://doi.org/10.1016/j.biomaterials.2015.12.020
Metzger S, Lienemann PS, Ghayor C, Weber W, Martin I, Weber FE, Ehrbar M (2015) Modular poly(ethylene glycol) matrices for the controlled 3D-localized osteogenic differentiation of mesenchymal stem cells. Adv Healthc Mater 4(4):550–558. https://doi.org/10.1002/adhm.201400547. Epub 2014 Oct 31
Mirani B, Pagan E, Currie B et al (2017) An advanced multifunctional hydrogel-based dressing for wound monitoring and drug delivery. Adv Healthc Mater 6(19):1700718. https://doi.org/10.1002/adhm.201700718
Moon JR, Kim JH (2010) Biodegradable stimuli-responsive hydrogels based on amphiphilic polyaspartamides with tertiary amine pendent groups. Polym Int 59(5):630–636. https://doi.org/10.1002/pi.2740
Monz S, Tschöpe A, Birringer R (2008) Magnetic properties of isotropic and anisotropic -based ferrogels and their application as torsional and rotational actuators. Phys Rev E 78(2)
Moroni L, De Wijn JR, Van Blitterswijk CA (2006) 3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties. Biomaterials 27(7):974–985. https://doi.org/10.1016/j.biomaterials.2005.07.023
Namdeo M, Bajpai SK, Kakkar S (2009) Preparation of a magnetic-field-sensitive hydrogel and preliminary study of its drug release behavior. J Biomater Sci Polym Ed 20(12):1747–1761. https://doi.org/10.1163/156856208X386372
Naseri-Nosar M, Ziora ZM (2018) Wound dressings from naturally-occurring polymers: a review on homopolysaccharide-based composites. Carbohydr Polym 189:379–398. https://doi.org/10.1016/j.carbpol.2018.02.003
Ng SF, Leow HL (2015) Development of biofilm-targeted antimicrobial wound dressing for the treatment of chronic wound infections. Drug Dev Ind Pharm 41(11):1902–1909. https://doi.org/10.3109/03639045.2015.1019888
Nguyen KT, West JL (2002) Photopolymerizable hydrogels for tissue engineering applications. Biomaterials 23:4307–4314
Odenbach S (2003) Magnetic fluids - suspensions of magnetic dipoles and their magnetic control. J Phys Condens Matter 15(15):S1497–S1508
Olewnik-Kruszkowska E, Gierszewska M, Jakubowska E, Tarach I, Sedlarik V, Pummerova M (2019) Antibacterial films based on PVA and PVA-chitosan modified with poly(hexamethylene guanidine). Polymers 11(12):2093. https://doi.org/10.3390/polym11122093
Oliveira EE, Silva AE, JĂºnior TN, Gomes MCS, Aguiar LM, Marcelino HR, AraĂºjo IB, Bayer MP, Ricardo NMPS, Oliveira AG, Egito EST (2010) Xylan from corn cobs, a promising polymer for drug delivery: production and characterization. Bioresour Technol 101(14):5402–5406. https://doi.org/10.1016/j.biortech.2010.01.137
Park Y, Lutolf MP, Hubbell JA, Hunziker EB, Wong M (2004) Bovine primary chondrocyte culture in synthetic matrix metalloproteinase-sensitive poly(ethylene glycol)-based hydrogels as a scaffold for cartilage repair. Tissue Eng 10(3–4):515–522. https://doi.org/10.1089/107632704323061870
Patel S, Srivastava S, Singh MR, Singh D (2018) Preparation and optimization of chitosan-gelatin films for sustained delivery of lupeol for wound healing. Int J Biol Macromol 107(Pt B):1888–1897. https://doi.org/10.1016/j.ijbiomac.2017.10.056
Paulino AT, Pereira AGB, Fajardo AR, Erickson K, Kipper MJ, Muniz EC, Belfiore LA, Tambourgi EB (2012) Natural polymer-based magnetic hydrogels: potential vectors for remote-controlled drug release. Carbohydr Polym 90(3):1216–1225
Pawar HV, Tetteh J, Boateng JS (2013) Preparation, optimisation and characterisation of novel wound healing film dressings loaded with streptomycin and diclofenac. Colloids Surf B: Biointerfaces 102:102–110. https://doi.org/10.1016/j.colsurfb.2012.08.014
Pawar HV, Boateng JS, Ayensu I, Tetteh J (2014) Multifunctional medicated lyophilised wafer dressing for effective chronic wound healing. J Pharm Sci 103(6):1720–1733. https://doi.org/10.1002/jps.23968
Peng XW, Ren JL, Zhong LX, Sun RC (2011) Nanocomposite films based on xylan-rich hemicelluloses and cellulose nanofibers with enhanced mechanical properties. Biomacromolecules 12(9):3321–3329. https://doi.org/10.1021/bm2008795
Peppas NA, Hilt JZ, Khademhosseini A, Langer R (2006) Hydrogels in biology and medicine: from molecular principles to bionanotechnology. Adv Mater 18(11):1345–1360. https://doi.org/10.1002/adma.200501612
Pereira MM, Raposo NRB, Brayner R, Teixeira EM, Oliveira V, QuintĂ£o CCR, Camargo LSA, Mattoso LHC, BrandĂ£o HM (2013) Cytotoxicity and expression of genes involved in the cellular stress response and apoptosis in mammalian fibroblast exposed to cotton cellulose nanofibers. Nanotechnology 24(7):075103. https://doi.org/10.1088/0957-4484/24/7/075103
Petersen N, Gatenholm P (2011) Bacterial cellulose-based materials and medical devices: current state and perspectives. Appl Microbiol Biotechnol 91(5):1277–1286. https://doi.org/10.1007/s00253-011-3432-y
Phan TTV, Huynh TC, Oh J (2019) Photothermal responsive porous membrane for treatment of infected wound. Polymers 11(10):1679. https://doi.org/10.3390/polym11101679
Plotkin M, Vaibavi SR, Rufaihah AJ, Nithya V, Wang J, Shachaf Y, Kofidis T, Seliktar D (2014) The effect of matrix stiffness of injectable hydrogels on the preservation of cardiac function after a heart attack. Biomaterials 35(5):1429–1438. https://doi.org/10.1016/j.biomaterials.2013.10.058. Epub 2013 Nov 21
Popa VI (2011) Polysaccharides in medicinal and pharmaceutical applications. Smithers Rapra, Shrewsbury. https://books.google.co.in/books?id=NPwlDwAAQBAJ&pg=PA409&lpg=PA409&dq=Polysaccharides+in+medicinal+and+pharmaceutical+applications.+Smithers+Rapra,+Shrewsbury&source=bl&ots=un9ZcPwBjY&sig=ACfU3U3LyTZjnJwWyzssZYVi1L5jslJBTA&hl=en&sa=X&ved=2ahUKEwja0L7Ixu7
Portal O, Clark WA, Levinson DJ (2009) Microbial cellulose wound dressing in the treatment of nonhealing lower extremity ulcers. Wounds 21(1):1–3. http://europepmc.org/article/med/25904579
Powell LC, Khan S, Chinga-Carrasco G, Wright CJ, Hill KE, Thomas DW (2016) An investigation of Pseudomonas aeruginosa biofilm growth on novel nanocellulose fibre dressings. Carbohydr Polym 137:191–197. https://doi.org/10.1016/j.carbpol.2015.10.024
Putro JN, Soetaredjo FE, Lin S-Y, Yi-Hsu J, Ismadji S (2016) Pretreatment and conversion of lignocellulose biomass into valuable chemicals. RSC Adv 6(52):46834–46852
Qi XM, Liu SY, Chu FB, Pang S, Liang YR, Guan Y, Peng F, Sun RC (2015) Preparation and characterization of blended films from quaternized hemicelluloses and carboxymethyl cellulose. Materials (Basel, Switzerland) 9(1):4. https://doi.org/10.3390/ma9010004
Qin XH, Ovsianikov A, Stampfl J, Liska R (2014) Additive manufacturing of photosensitive Hydrogels for tissue engineering applications. BioNanoMaterials 15(3–4):49–70. https://doi.org/10.1515/bnm-2014-0008
Qiu Y, Park K (2001) Environment-sensitive hydrogels for drug delivery. Adv Drug Deliv Rev 53(3):321–339. https://doi.org/10.1016/S0169-409X(01)00203-4
Ragauskas AJ, Williams CK, Davison BH, Britovsek G, Cairney J, Eckert CA, Fredrick WJ Jr, Hallett JP, Leak DJ, Liotta CL, Mielenz JR, Murphy R, Templer R, Tschaplinski T (2006) The path forward for biofuels and biomaterials. Science 311:484
Ramanujan RV, Lao LL (2006) The mechanical behavior of smart magnet–hydrogel composites. Smart Mater Struct 15(4):952–956
Ramon-Azcon J, Ahadian S, Estili M, Liang XB, Ostrovidov S, Kaji H, Shiku H, Ramalingam M, Nakajima K, Sakka Y, Khademhosseini A, Matsue T (2013) Dielectrophoretically aligned carbon nanotubes to control electrical and mechanical properties of hydrogels to fabricate contractile muscle myofibers. Adv Mater 25:4028
Ratner BD, Bryant SJ (2004) Biomaterials: where we have been and where we are going. Annu Rev Biomed Eng 6:41–75. https://doi.org/10.1146/annurev.bioeng.6.040803.140027
Ravi M, Paramesh V, Kaviya SR, Anuradha E, Paul Solomon FD (2015) 3D cell culture systems: advantages and applications. J Cell Physiol 230(1):16–26. https://doi.org/10.1002/jcp.24683
Ren J, Hong H, Ren T, Teng X (2006) Preparation and characterization of magnetic PLA-PEG composite nanoparticles for drug targeting. React Funct Polym 66(9):944–951. https://doi.org/10.1016/j.reactfunctpolym.2006.01.002
Rezk AI, Lee JY, Son BC, Park CH, Kim CS (2019) Bi-layered nanofibers membrane loaded with titanium oxide and tetracycline as controlled drug delivery system for wound dressing applications. Polymers 11(10):1602. https://doi.org/10.3390/polym11101602
Rezvanian M, Mohd Amin MCI, Ng SF (2016) Development and physicochemical characterization of alginate composite film loaded with simvastatin as a potential wound dressing. Carbohydr Polym 137:295–304. https://doi.org/10.1016/j.carbpol.2015.10.091
Riaz RS, Elsherif M, Moreddu R, Rashid I, Hassan MU, Yetisen AK, Butt H (2019) Anthocyanin-functionalized contact lens sensors for ocular pH monitoring. ACS Omega 4(26):21792–21798. https://doi.org/10.1021/acsomega.9b02638
Rimmer S (2011) Biomedical hydrogels: biochemistry, manufacture and medical applications. Elsevier, Amsterdam
Rizwan M, Yahya R, Hassan A, Yar M, Azzahari A, Selvanathan V, Sonsudin F, Abouloula C (2017) pH sensitive hydrogels in drug delivery: brief history, properties, swelling, and release mechanism, material selection and applications. Polymers 9(12):137. https://doi.org/10.3390/polym9040137
Ruiz HA, Cerqueira MA, Silva HD, RodrĂguez-jasso RM, Vicente AA, Teixeira JA (2013) Biorefinery valorization of autohydrolysis wheat straw hemicellulose to be applied in a polymer-blend film. Carbohydr Polym 92(2):2154–2162. https://doi.org/10.1016/j.carbpol.2012.11.054
Ryu JH, Kim IK, Cho SW, Cho MC, Hwang KK, Piao H, Piao S, Lim SH, Hong YS, Choi CY, Yoo KJ, Kim BS (2005) Implantation of bone marrow mononuclear cells using injectable fibrin matrix enhances neovascularization in infarcted myocardium. Biomaterials 26(3):319–326. https://doi.org/10.1016/j.biomaterials.2004.02.058
Saghir S, Iqbal MS, Hussain MA, Koschella A, Heinze T (2008) Structure characterization and carboxymethylation of arabinoxylan isolated from Ispaghula (Plantago ovata) seed husk. Carbohydr Polym 74(2):309–317. https://doi.org/10.1016/j.carbpol.2008.02.019
Saghir S, Iqbal MS, Koschella A, Heinze T (2009) Ethylation of arabinoxylan from Ispaghula (Plantago ovata) seed husk. Carbohydr Polym 77(1):125–130. https://doi.org/10.1016/j.carbpol.2008.12.009
Said J, Dodoo CC, Walker M, Parsons D, Stapleton P, Beezer AE, Gaisford S (2014) An in vitro test of the efficacy of silver-containing wound dressings against Staphylococcus aureus and Pseudomonas aeruginosa in simulated wound fluid. Int J Pharm 462(1–2):123–128. https://doi.org/10.1016/j.ijpharm.2013.12.037
Santos E, HernĂ¡ndez RM, Pedraz JL, Orive G (2012) Novel advances in the design of three-dimensional bio-scaffolds to control cell fate: translation from 2D to 3D. Trends Biotechnol 30(6):331–341. https://doi.org/10.1016/j.tibtech.2012.03.005
Sasatsu M, Onishi H, Machida Y (2005) Preparation of a PLA-PEG block copolymer using a PLA derivative with a formyl terminal group and its application to nanoparticulate formulation. Int J Pharm 294(1–2):233–245. https://doi.org/10.1016/j.ijpharm.2005.01.016
Satarkar NS, Zhang W, Eitel RE, Zach Hilt J (2009) Magnetic hydrogel nanocomposites as remote controlled microfluidic valves. Lab Chip 9(12):1773
Satoh T, Sumaru K, Takagi T, Kanamori T (2015) Light dose-dependent thickness control of photoacid generator-bearing hydrogel. Macromol Symp 358:52–58
Schild HG, Tirrell DA (1990) Microcalorimetric detection of lower critical solution temperatures in aqueous polymer solutions. J Phys Chem 94(10):4352–4356. https://doi.org/10.1021/j100373a088
Schmidt S, Zeiser M, Hellweg T, Duschl C, Fery A, Mohwald H (2010) Adhesion and mechanical properties of PNIPAM microgel films and their potential use as switchable cell culture substrates. Adv Funct Mater 20:3235–3243
Schneider LA, Korber A, Grabbe S, Dissemond J (2007) Influence of pH on wound-healing: a new perspective for wound-therapy? Arch Dermatol Res 298(9):413–420
Scranton AB, Rangarajan B, Klier J (1995) Biomedical applications of polyelectrolytes. In: Peppas NA, Langer RS (eds) Biopolymers II. Advances in polymer science, vol 122. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3540587888_13
Sefton M, May MH, Lahooti S, Babensee J (2000) Making microencapsulation work: conformal coating, immobilization gels and in vivo performance. J Control Release 65(1–2):173–186
Shamim N, Hong L, Hidajat K, Uddin MS (2007) Thermosensitive polymer (N-isopropylacrylamide) coated nanomagnetic particles: preparation and characterization. Colloids Surf B: Biointerfaces 55(1):51–58. https://doi.org/10.1016/j.colsurfb.2006.11.007
Shao H, Sun H, Yang B, Zhang H, Hu Y (2019) Facile and green preparation of hemicellulose-based film with elevated hydrophobicity: via cross-linking with citric acid. RSC Adv 9(5):2395–2401. https://doi.org/10.1039/c8ra09937e
Shin SR, Bae H, Cha JM, Mun JY, Chen YC, Tekin H, Shin H, Farshchi S, Dokmeci MR, Tang S, Khademhosseini A (2012) Carbon nanotube reinforced hybrid microgels as scaffold materials for cell encapsulation. ACS Nano 6(1):362–372. https://doi.org/10.1021/nn203711s
Shin SR, Jung SM, Zalabany M, Kim K, Zorlutuna P, Kim S b, Nikkhah M, Khabiry M, Azize M, Kong J, Wan K-t, Palacios T, Dokmeci MR, Bae H, Tang X(S), Khademhosseini A (2013) Carbon-nanotube-embedded hydrogel sheets for engineering cardiac constructs and bioactuators. ACS Nano 7(3):2369–2380
Shin SR, Shin C, Memic A, Shadmehr S, Miscuglio M, Jung HY, Jung SM, Bae H, Khademhosseini A, Tang XS, Dokmeci MR (2015) Aligned carbon nanotube-based flexible gel substrates for engineering biohybrid tissue actuators. Adv Funct Mater 25(28):4486–4495. https://doi.org/10.1002/adfm.201501379
Šimkovic I (2013) Unexplored possibilities of all-polysaccharide composites. Carbohydr Polym 95(2):697–715. https://doi.org/10.1016/j.carbpol.2013.03.040
Simões D, Miguel SP, Ribeiro MP, Coutinho P, Mendonça AG, Correia IJ (2018) Recent advances on antimicrobial wound dressing: a review. Eur J Pharm Biopharm 127:130–141. https://doi.org/10.1016/j.ejpb.2018.02.022
Singh B, Sharma S, Dhiman A (2013) Design of antibiotic containing hydrogel wound dressings: biomedical properties and histological study of wound healing. Int J Pharm 457(1):82–91. https://doi.org/10.1016/j.ijpharm.2013.09.028
Smith TJ, Kennedy JE, Higginbotham CL (2010) Rheological and thermal characteristics of a two phase hydrogel system for potential wound healing applications. J Mater Sci 45(11):2884–2891. https://doi.org/10.1007/s10853-010-4278-x
Snyder RL, Nguyen VQ, Ramanujan RV (2010) Design parameters for magneto-elastic soft actuators. Smart Mater Struct 19(5):055017
Spiridon I, Popa VI (2008) Hemicelluloses: major sources, properties and applications. In: Monomers, polymers and composites from renewable resources, pp 289–304. https://doi.org/10.1016/B978-0-08-045316-3.00013-2
Stile RA, Burghardt WR, Healy KE (1999) Synthesis and characterization of injectable poly(N-isopropylacrylamide)-based hydrogels that support tissue formation in vitro. Macromolecules 32(22):7370–7379. https://doi.org/10.1021/ma990130w
Stile RA, Shull K, Healy K (2003) Axisymmetric adhesion test to examine the interfacial interactions between biologically-modified networks and models of the extracellular matrix. Langmuir 19:1853–1860
Structure and properties of hemicellulose (n.d.). http://web.nchu.edu.tw/pweb/users/taiwanfir/lesson/10393.pdf. Accessed 16 Sep 2020
Sugiura S, Sumaru K, Ohi K, Hiroki K, Takagi T, Kanamori T (2007) Photoresponsive polymer gel microvalves controlled by local light irradiation. Sensors Actuators A Phys 140:176–184
Sumaru K, Kikuchi K, Takagi T, Yamaguchi M, Satoh T, Morishita K, Kanamori T (2013) On-demand killing of adherent cells on photo-acid-generating culture substrates. Biotechnol Bioeng 110:348–352
Sumaru K, Morishita K, Takagi T, Satoh T, Kanamori T (2017) Sectioning of cultured cell monolayer using photo-acid-generating substrate and micro-patterned light projection. Eur Polym J 93:733–742
Sun R, Sun XF, Tomkinson J (2003) Hemicelluloses and their derivatives. In: Hemicelluloses, pp 2–22. https://doi.org/10.1021/bk-2004-0864.ch001
Sun X, Xu F, Zhao H, Sun R, Fowler P, Biard M (2005) Physicochemical characterisation of residual hemicelluloses isolated with cyanamide-activated hydrogen peroxide from organosolv pre-treated wheat straw. Bioresour Technol 96(12):1342–1349. https://doi.org/10.1016/j.biortech.2004.11.018
Sun XF, Wang HH, Jing ZX, Mohanathas R (2013) Hemicellulose-based pH-sensitive and biodegradable hydrogel for controlled drug delivery. Carbohydr Polym 92(2):1357–1366. https://doi.org/10.1016/j.carbpol.2012.10.032
Sundelacruz S, Levin M, Kaplan DL (2009) Role of membrane potential in the regulation of cell proliferation and differentiation. Stem Cell Rev Rep 5(3):231–246
Suzuki A (1994) Light induced phase transition of poly(N-isopropylacrylamide-co-chlorophyllin) gels. J Intell Mater Syst Struct 5(1):112–116
Tamura K, Ike O, Hitomi S, Isobe J, Shimizu Y, Nambu M (1986) A new hydrogel and its medical application. ASAIO Trans 32(1):605–608. https://jglobal.jst.go.jp/en/detail?JGLOBAL_ID=200902006425476777
Tang Q, Sun X, Li Q, Wu J, Lin J (2009) Fabrication of a high-strength hydrogel with an interpenetrating network structure. Colloids Surf A Physicochem Eng Asp 346(1–3):91–98
Turabee MH, Jeong TH, Ramalingam P, Kang JH, Ko YT (2019) N,N,N-trimethyl chitosan embedded in situ Pluronic F127 hydrogel for the treatment of brain tumor. Carbohydr Polym 203:302–309. https://doi.org/10.1016/j.carbpol.2018.09.065
Urtiga SCDC, Alves VMO, Melo CO, Lima MN, Souza E, Cunha AP, Ricardo NMPS, Oliveira EE, Egito ESTD (2020) Xylan microparticles for controlled release of mesalamine: production and physicochemical characterization. Carbohydr Polym 250:116929
Vermonden T, Censi R, Hennink WE (2012) Hydrogels for protein delivery. Chem Rev 112(5):2853–2888. https://doi.org/10.1021/cr200157d
Vieira EFS, Cestari AR, Airoldi C, Loh W (2008) Polysaccharide-based hydrogels: preparation, characterization, and drug interaction behaviour. Biomacromolecules 9(4):1195–1199
Vincent Edwards J, Yager DR, Kelman Cohen I, Diegelmann RF, Montante S, Bertoniere N, Bopp AF (2001) Modified cotton gauze dressings that selectively absorb neutrophil elastase activity in solution. Wound Repair Regen 9(1):50–58. https://doi.org/10.1046/j.1524-475X.2001.00050.x
Wang K, Fu Q, Chen X, Gao Y, Dong K (2012) Preparation and characterization of pH-sensitive hydrogel for drug delivery system. RSC Adv 2(20):7772–7780. https://doi.org/10.1039/c2ra20989f
Werner S, Grose R (2003 Jul) Regulation of wound healing by growth factors and cytokines. Physiol Rev 83(3):835–870. https://doi.org/10.1152/physrev.2003.83.3.835
Wikipedia (n.d.) Hemicellulose. https://en.wikipedia.org/wiki/Hemicellulose#Structural_comparison_to_cellulose. Accessed 15 Sep 2020
Wu J, Gong X, Fan Y, Xia H (2011) Physically crosslinked poly(vinyl alcohol) hydrogels with magnetic field controlled modulus. Soft Matter 7(13):6205
Xavier JR, Thakur T, Desai P, Jaiswal MK, Sears N, Cosgriff-Hernandez E, Kaunas R, Gaharwar AK (2015) Bioactive nanoengineered hydrogels for bone tissue engineering: a growth-factor-free approach. ACS Nano 9(3):3109–3118. https://doi.org/10.1021/nn507488s
Xiao C, Luong JH (2010) A simple mathematical model for electric cell-substrate impedance sensing with extended applications. Biosens Bioelectron 25:1774–1780
Xue W, Hamley IW, Huglin MB (2002) Rapid swelling and deswelling of thermoreversible hydrophobically modified poly(N-isopropylacrylamide) hydrogels prepared by freezing polymerisation. Polymer 43(19):5181–5186. https://doi.org/10.1016/S0032-3861(02)00396-8
Xue B, Qin M, Wang T, Wu J, Luo D, Jiang Q, Li Y, Cao Y, Wang W (2016) Electrically controllable actuators based on supramolecular peptide hydrogels. Adv Funct Mater 26(48):9053–9062
Yang JY, Zhou XS, Fang J (2011) Synthesis and characterization of temperature sensitive hemicellulose-based hydrogels. Carbohydr Polym 86(3):1113–1117. https://doi.org/10.1016/j.carbpol.2011.05.043
Yang C, Liu Z, Chen C, Shi K, Zhang L, Ju XJ, Wang W, Xie R, Chu LY (2017) Reduced graphene oxide-containing smart hydrogels with excellent electro-response and mechanical properties for soft actuators. ACS Appl Mater Interfaces 9(18):15758–15767. https://doi.org/10.1021/acsami.7b01710
Yon SHH, Cha WI, Ikada Y, Kita M, Ogura Y, Honda Y (1994) Poly (vinyl alcohol) hydrogels as soft contact lens material. J Biomater Sci Polym Ed 5(5):397–406. https://doi.org/10.1163/156856294X00103
Yuk SH, Cho SH, Lee HB (1992) Electric current-sensitive drug delivery systems using sodium alginate/polyacrylic acid composites. Pharm Res 9(7):955–957. https://doi.org/10.1023/A:1015821504229
Zhang YQ, Xie BJ, Gan X (2005) Advance in the applications of konjac glucomannan and its derivatives. Carbohydr Polym 60(1):27–31. https://doi.org/10.1016/j.carbpol.2004.11.003
Zhang Y, Yang B, Zhang X, Xu L, Tao L, Li S, Wei Y (2012) A magnetic self-healing hydrogel. Chem Commun 48(74):9305
Zhang W, Jin X, Li H, Zhang RR, Wu CW (2018) Injectable and body temperature sensitive hydrogels based on chitosan and hyaluronic acid for pH sensitive drug release. Carbohydr Polym 186:82–90. https://doi.org/10.1016/j.carbpol.2018.01.008
Zhao Y, Lei M, Liu S-X, Zhao Q (2018) Smart hydrogel-based optical fiber SPR sensor for pH measurements. Sensors Actuators B Chem 261:226–232. https://doi.org/10.1016/j.snb.2018.01.120
Zhao Y, Sun H, Yang B, Weng Y (2020) Hemicellulose-based film: potential green films for food packaging. Polymers 12(8):1775. https://doi.org/10.3390/polym12081775
Zheng X, Kan B, Gou M, Fu S, Zhang J, Men K, Chen L, Luo F, Zhao Y, Zhao X, Wei Y, Qian Z (2010) Preparation of MPEG-PLA nanoparticle for honokiol delivery in vitro. Int J Pharm 386(1–2):262–267. https://doi.org/10.1016/j.ijpharm.2009.11.014. Epub 2009 Nov 20
Zhu J, Marchant RE (2011) Design properties of hydrogel tissue-engineering scaffolds. Expert Rev Med Devices 8(5):607–626. https://doi.org/10.1586/erd.11.27
Zimmermann R, Bartsch S, Freudenberg U, Werner C (2012) Electrokinetic analysis to reveal composition and structure of biohybrid hydrogels. Anal Chem 84(21):9592–9595. https://doi.org/10.1021/ac302538j
Zorlutuna P, Jeong JH, Kong H, Bashir R (2011) Stereolithography- based hydrogel microenvironments to examine cellular interac- tions. Adv Funct Mater 21:3642–3651
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Patil, P.H., Pardeshi, C.V., Mahajan, H.S., Surana, S.J. (2022). Hemicellulose-Based Delivery Systems: Focus on Pharmaceutical and Biomedical Applications. In: Brienzo, M. (eds) Hemicellulose Biorefinery: A Sustainable Solution for Value Addition to Bio-Based Products and Bioenergy. Clean Energy Production Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-16-3682-0_15
Download citation
DOI: https://doi.org/10.1007/978-981-16-3682-0_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-3681-3
Online ISBN: 978-981-16-3682-0
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)